FMC ADC 100M 14B 4CHA testing support
Overview
This project describes the production test system for the
FMC-ADC-100M-14b-4cha card.
It is based on a SPEC carrier
board and a standard desktop computer.
The test system is based on the
PTS (Production Test Suite)
framework.
It is used in the fmc-adc-100m14b4cha-tst project as a git-submodule.
Test system setup
Installation instuctions
Required hardware
- A desktop computer (with monitor, mouse and keyboard) and a free PCIe slot (4x lane or more).
- A bar-code reader (e.g. CodeCorp CR1421).
- A PCIe flexible extender, SAMTEC PCIEC-064-0200-EC-EM-P.
- A SPEC (Simple PCIe FMC Carrier) board.
- Four spacers and height screws to fix the SPEC board to the computer case.
- An arbitrary waveform generator (AWG), Agilent 33250A.
- A USB to RS232 converter (FT232 based).
- A RS232 null modem cable (DB9 female – DB9 female).
- An FMC-ADC calibration box.
- A USB cable (type A to type B).
- 7x 2ns LEMO cables.
- 2x BNC to LEMO adapters.
- Two power cords (for the computer and the AWG).
- An anti-static wrist band.
Documentation
Production testing
- Production test procedure (pdf file).
- Production test procedure summary (pdf file).
Support
Matthieu Cattin, Dimitris Lampridis - January 2020