Simple PXIe FMC Carrier SPEXI

The PXI express FMC Carrier Board (SPEXI) is the PXI express version of the SPEC board. It is an FMC carrier that can hold one FMC card and an SFP connector. On the PXI express side it has a 4-lane interface, while the FMC mezzanine slot uses a low-pin count connector. This board will be usable with most of the FMC cards designed within CERN’s OHR project (e.g. ADC cards, Fine Delay).

LabVIEW drivers are available for the FMC DEL 1ns 4cha delay and FMC TDC 1ns 5cha TDC mezzanine cards. These drivers do not support White Rabbit.

Spexi means “I observe, watch, look at.” in Latin.

SPEXI v1

Contact

Grzegorz Daniluk

Licences

Tags

FMC FMC Carrier PXIe White Rabbit WR Node Inactive

Compatible Projects

White Rabbit Switch - Hardware

White Rabbit Switch is an open hardware design of an 18-ports Ethernet switch licensed under CERN OHL 1.2

White Rabbit Switch - Hardware V4

This project describes the development of the hardware of the White Rabbit Switch version 4 (WRS-v4)

WRS Fan-less hardware

The White Rabbit Switch is the central element of a White Rabbit network and was designed as a part of the White Rabbit project

WRS with low jitter logic integrated

The White Rabbit Switch Low Jitter (WRS-3-LJ/18) is a new version of the White Rabbit Switch which counts with a series of improvements that enable its use in more demanding time and frequency distribution applications

WRS-318 with LJD prepared hardware

An 18-port White Rabbit switch V3.4 that is prepared for the Low-Jitter Daughterboard