An enterprise of zeal and excellence


http://www.creotech.pl

logo

CREOTECH was set up as a field of action for engineers, the best specialists in their fields, to enable the practical application of their knowledge and experience. Our mission is to create innovative, ready-to-implement solutions of eletronics and electromechanics.

It's us you can rely on when it comes to design and produce digital cameras (both the most advanced and specialized ones, as well as those intended for a wide range of customers), design and production of electronic measurement systems and control devices, acquisition cards and processing of signals, systems for data transmission and other advanced equipment.

Our company is created by people with passion, experience and knowledge, which is derived from the best scientific institutions in the country. They have proven their worth working for the most highly valued technical laboratories in Europe. Thanks to this CREOTECH is a company of unique experience for the Polish-scale, improved even more by co-operation with other Polish companies in the industry. Our pride is the knowledge of the state of the art methods of design and manufacture of electronic devices.

You are cordially invited to become familiar with the details of the offer and make use of our knowledge.

Country Poland
HW development Yes
HW commercialisation Yes
HDL development Yes
SW development Yes

Projects

AMC CPU COM6

Double width AMC CPU board for COM EXPRESS mezzanines, dedicated to MTCA 4.0 for physics. It can function either as Standard AMC or RTM in cooperation with dedicated WR-MCH freeing 1 AMC slot.
Features: 4 USB 2.0 ports, 4 USB 3.0 ports, Type 6 COM Express module connector, 2 ESATA ports, custom RTM PCIe x16 connector, 2 Gigabit Ethernet ports, 2 Gigabit Ethernet (SERDES) routed to uTCA Port 0 and Port1 serial console connector, Mini Display Port, Mini HDMI port, mPCIe socket, Extension connector for on-board FPGA mezzanine, Double width, full (or mid) size design.

FMC ADC 2k 24b 8cha

General application FMC card that can be used to acquire signals from a variety of sensors - thermopiles, RTDs, resistive bridges, etc.
It has a SCSI-type input connector and uses an SPI interface connected to the LA lanes.

FMC ADC 130M 16b 4cha

4-channel 16-bit 130 MS/s (700 MHz analog input bandwidth) ADC (LTC2208) FMC module.

FMC ADC 250M 16b 4cha

4-channel 16-bit 250 MS/s (700 MHz analog input bandwidth) ADC (ISLA216P25) FMC module.

FMC ADC 125M 14b 1ch DAC 600M 14b 1ch

An FMC board with an analog 125 MS/s input and an analog 600 MS/s output for RF applications.

Simple PCIe FMC carrier (SPEC)

A simple 4-lane PCIe carrier for a low pin count FPGA Mezzanine Card (VITA 57). It supports the White Rabbit timing and control network. Commercially available. Linux and Labview drivers available for some mezzanine cards.
More info at the Wiki page

Simple PXIe FMC Carrier (SPEXI)

A simple 4-lane PXIe carrier for a low pin count FPGA Mezzanine Card (VITA 57). It supports the White Rabbit timing and control network. Commercially available. Labview driver available for Fine Delay and TDC mezzanines.
More info at the Wiki page

FMC DIO 5ch TTL a

FmcDIO5chTTLa is a 5-bit port digital IO card in FMC form-factor. Each single-bit port can be configured individually as input or output. The I/Os on LEMO 00 connectors are TTL compatible. Commercially available.
More info at the Wiki page

FMC ADC 100M 14b 4cha

FmcAdc100M14b4cha is a 4 channel 100MSPS 14 bit ADC low pin count FPGA Mezzanine Card (VITA 57). Input ranges: /-50mV,/-0.5V, /-5V. The offset correction by/- 5V is possible for each gain range. Commercially available.
More info at the Wiki page

FMC DIO 32ch TTL a

FmcDIO32chTTLa is a 32-bit port digital IO card in FMC form-factor.
More info at the Wiki page

Handheld measurement terminal

It is a simple, low-cost measurement device equipped with GPS, GPRS modem, keyboard, display and LiOn battery. It can be also supplied/charged via a USB connector.
It is enclosed in a nice-looking Hammond enclosure. It also has 3 RJ50 connectors that enable connection of various types of sensors.
Each sensor can be connected using UART, I2C, SPI, 1-wire or analog interface. The device connects with a remote server which is also part of the development.
We want to use them at Warsaw University of Technology to build a distributed network of sensors.

VME ADC 250k 16b 36cha

VME board with 36 ADC channels with a sampling rate of 250 kS/s and 16 bits resolution.
More info at the Wiki page

VIDEO Processing Platform (MIXXEO)

Video Processing Platform (MIXXEO). With 2 HDMI inputs, DVI + VGA output, Spartan 6 FPGA, DDR SDRAM memory and Ethernet.

FMC PowerPC carrier (SPEC-based)

FMC carrier equipped with a Power PC embedded processor. In addition to the SPEC it has 2 gigabit Ethernet ports, one mini PCIe connector and USB 2.0 HS. It is supplied from a single 12V and runs Linux. The FPGA is configured from the processor and also interfaced using PCI Express x1 and a local bus. The system boots from on-board NAND or NOR flash memory.

Simple VME FMC Carrier (SVEC)

A simple VME64x carrier for two low pin count FPGA Mezzanine Cards (VITA 57). It has memory and clocking resources and supports the White Rabbit timing and control network. Commercially available.
More info at the Wiki page

SFP ADC 130M 12b 1ch DAC 130M 12b 1cha

Optical 130MS/s ADC/DAC with SFP - for digital transmission of analog signals over fibre.
More info at the Wiki page

Made non-public on 24/3/16 by Erik*

FMC HV SUP

FMC High Voltage supply capable of delivering positive or negative voltage (selectable by components assembly) with voltage and current monitoring. Features FMC LPC, 0.../- 6kV, up to 4W, Selectable range (/- 750V, /- 1.5kV,/- 3kV, /- 4.5kV,/- 6kV), Voltage and current measurement with hardware over-current protection, SHV output.

FMC DAC 100M 14b 16cha ADC 2M 14B 4 cha

The Fmc DAC 100M 14b 16cha ADC 2M 14B 4cha is a 16 channel 100MSPS 14 bit DAC and 4 channel 2MSPS 14 bit ADC card in FMC (FPGA Mezzanine Card) format. The board is also equipped with 4 DIO channels.

FMC 8 channel temperature monitor

A simple card that measures temperatures using low cost external Silicon sensors (just ordinary bipolar transistors). On the front panel it has 8 mini-jack connectors to quickly rearrange the setup.
We use this kind of the cards for measurement of the temperature distribution of key components on PCBs.
The card has also application in our GEM detector readout system to monitor temperatures inside the detector box - it is attached to the rear transition module with an FMC connector.
The card uses only an I2C interface which can be connected to the I2C bus of the card or to the LA lanes.

Stand-alone 18-slot FMC carrier

Stand Alone Carrier with 18 FMC LPC slots based on Spartan FPGAs, mini-ITX board and ATX supply.
More info at the Wiki page

FMC DAC 130M 12b 4ch 4SFP

FMC with 4 SFPs, 4 DACs, and 4 TLK2501 chips. The board receives data streams from remote ADCs using an optical serial interface and produces analog outputs for monitoring purposes.
More info at the Wiki page

FMC DAC 600M 12b 1cha DDS

An FMC for Direct Digital Synthesis (DDS) applications. It contains a DAC, a phase detector and a PLL chip.
More info at the Wiki page

FMC ADC 100M 14b 16cha DAC 2M 14B 4 cha

The Fmc ADC 100M 14b 16cha DAC 2M 14B 4cha is a 16 channel 100MSPS 14 bit ADC and 4 channel 2MSPS 14 bit DAC card in FMC (FPGA Mezzanine Card) format. The board is also equipped with 4 DIO channels.

AMC uBackplane SFP

The AMC micro backplane enables stand-alone operation of an AMC FMC carrier or any other AMC board. It has 4 SFP connectors, 2 QSFP cages, 8 trigger I/O routed to the MLVDS ports and power entry.
*Superseded by the project amc-carrier-2-sl*

AMC FMC Carrier Kintex (AFCK)

AMC FMC Carrier with Kintex is designed to support FMC boards. Equiped in Xilinx Kintex-7 FPGA. It allows to connect clock source to any clock input
More info at the Wiki page

FMC ADC 125M 14b 1ch DAC 600M 14b 1ch - Software

Software to support the FMC ADC 125M 14B 1CH DAC 600M 14B 1CH mezzanine, including: Linux device driver, HDL firmware, application for data acquisition (ADC) and generating signals (DAC). Included Octave application for card performance measurement (FFT). Uses FMC-bus.
More info at the Wiki page

3.3V adapter for SVEC

A small PCB that generates 3.3 Volt so that a SVEC can work in older type of VME crates. The SVEC is a VME64x board where usually the 3.3 Volt supply is delivered by the crate itself. Older VME types do not generate this 3.3 Volt.

AMC FMC Carrier (AFC)

AMC FMC Carrier is designed to support FMC boards. Equiped in Xilinx Artix-7 FPGA. It allows to connect clock source to any clock input.
More info at the Wiki page

White Rabbit

White Rabbit is a fully deterministic Ethernet-based network for general purpose data transfer and synchronization. It can synchronize over 1000 nodes with sub-ns accuracy over fiber lengths of up to 10 km. Commercially available.
More info at the Wiki page

uTCA RTM 8 SFP+

The uTCA RTM 8 SFP is module equipped with 8 SFP cages and a clock distribution network. It is compatible with AFC and future projects such as Kintex-based AFC and WR MCH.
The module is compliant with DESY RTM class D1.3

FMC DEL 1ns 4cha

A fine delay generator in FMC format with 1 input and 4 outputs. The resolution is 1 ns. Commercially available.
More info at the Wiki page

FMC DIO 16ch lvds a

A low-pin-count (LPC) FMC board with 16 LVDS inputs. A possible application is to connect a CMOS image sensor such as the 4 Mpx sensor CMV4000.