AMC FMC Carrier Kintex (AFCKU)
Project description
The AMC FMC carrier is partially based on SPEC (supply, WR clocks)
design. Among many features, the card has very flexible clock circuit
that enables any clock source to be connected to any clock input,
including telecom clock, FMC clocks and FPGA.
It is very similar design to AMC FMC
board, the only difference is
faster FPGA from Kintex Ultrascale
family.
TEMPLATE DATA BELOW
AFCK production board* - (Top
view, Bottom
view)
Functional specifications
-
Programmable resources:
- Xilinx Kintrx Ultrascale XCKU035 FPGA (XCKU035-1FFVA1156C)
- MMC: LPC1768
-
Memory:
- 2 GB DDR3 SDRAM (32-bit interface), 400Mhz
- SPI Flash for FPGA configuration
- EEPROM with MAC and unique ID
-
Connectivity:
- 2 high pin count (HPC) slots for 2 single width mezzanines or 1 double width mezzanine
- Micro-USB connected to IPMI and FPGA
- MGT can be connected to FMC1, FMC2, Fat Pipe 1, Fat Pipe 2, Port0, Port1, Port2, Port3, RTM
- RTM connector with 8 GTP routed to it. Compatible with RTM-4SFP-3QSFP module.
-
Supply:
- Power supply for FPGA, memory, FMCs - VADJ fixed to 1.8V
- Voltage and current monitoring for all FMC power buses
-
Other:
- Clock distribution circuit compatible with White Rabbit and ARTIQ
- Temperature monitoring: FMC1, FMC2, supply, FPGA core, DDR memory
- JTAG access to FMC and RTM
Detailed project information
- Documentation:
- Schematics (PDF, Altium sources)
- PCB (PDF, Altium sources)
Contacts
Commercial producers
- Creotech, Poland
General question about project
Project status
Date | Event |
---|---|
01-01-2021 | Start working on schematic |
30-09-2021 | PCB finished |
03-04-2023 | PCB after review |
Filip Świtakowski - 03 Sep 2021