ARTIX Trivial FMC Carrier (ATFC)
Project description
Simple low cost, low complexity FPGA carrier board with FMC LPC
connector based around a Xilinx Artix-7.
The board is meant to be used in a stand-alone
fashion.
Main Features
- Stand-alone use
- 1x Xilinx Artix 35T FPGA (XC7A35T-1FGG484C)
- FMC slot with low pin count (LPC) connector
- Vadj fixed to 2.5V
- FMC connectivity: all 34 differential pairs connected, 2 Gbit serial, 2 clock pairs, I2C
- Clocking resources
- 1x 125 MHZ
- On board memory
- EEPROM and Unique ID (24AA025E48T)
- No additional RAM
- Front panel containing
- 2x Small Formfactor Pluggable (SFP) cage for fibre-optic transceiver
- 4x Status LEDs
- FMC front panel
- Internal connectors
- 8x GPIO
- 4x miniature DIP switches
- External 12V power supply connector
Project information
- Official production documentation
- Users
- Software
- Frequently Asked Questions
Contacts
Commercial producers
- none
General questions about project
- Dr David Cussans, University of Bristol
Status
Date | Event |
20-12-2016 | Start of project on ohwr. |
2-2-2016 | First draft schematic ready for review |
March 2017 | Planned date of first production. |
6 January 2017