Skip to content

B
Beam Positoning Monitor - Software
Commit 0eacd2ae authored by Lucas Russo's avatar Lucas Russo
Browse files
Options

apps/ebpm/*: add trigger iface/mux modules to BPM application

parent b34cfac0
Show whitespace changes
Inline Side-by-side
Showing with 17 additions and 0 deletions
src/apps/ebpm/ebpm.c
View file @ 0eacd2ae
...@@ -837,6 +837,8 @@ static devio_err_e _spawn_be_platform_smios (void *pipe, zhashx_t *hints, uint32 ...@@ -837,6 +837,8 @@ static devio_err_e _spawn_be_platform_smios (void *pipe, zhashx_t *hints, uint32
uint32_t acq_id = 0x4519a0ad; uint32_t acq_id = 0x4519a0ad;
uint32_t dsp_id = 0x1bafbf1e; uint32_t dsp_id = 0x1bafbf1e;
uint32_t swap_id = 0x12897592; uint32_t swap_id = 0x12897592;
uint32_t trigger_iface_id = 0xbcbb78d2;
uint32_t trigger_mux_id = 0x84b6a5ac;
devio_err_e err = DEVIO_SUCCESS; devio_err_e err = DEVIO_SUCCESS;
/* ML605 or AFCv3 */ /* ML605 or AFCv3 */
...@@ -928,6 +930,21 @@ static devio_err_e _spawn_be_platform_smios (void *pipe, zhashx_t *hints, uint32 ...@@ -928,6 +930,21 @@ static devio_err_e _spawn_be_platform_smios (void *pipe, zhashx_t *hints, uint32
if (err != DEVIO_SUCCESS) { if (err != DEVIO_SUCCESS) {
DBE_DEBUG (DBG_DEV_IO | DBG_LVL_FATAL, "[ebpm] devio_register_sm error!\n"); DBE_DEBUG (DBG_DEV_IO | DBG_LVL_FATAL, "[ebpm] devio_register_sm error!\n");
} }
err = devio_register_sm (pipe, trigger_iface_id, WB_TRIGGER_IFACE_BASE_ADDR, 0);
if (err != DEVIO_SUCCESS) {
DBE_DEBUG (DBG_DEV_IO | DBG_LVL_FATAL, "[ebpm] devio_register_sm error!\n");
}
err = devio_register_sm (pipe, trigger_mux_id, WB_TRIGGER_MUX1_BASE_ADDR, 0);
if (err != DEVIO_SUCCESS) {
DBE_DEBUG (DBG_DEV_IO | DBG_LVL_FATAL, "[ebpm] devio_register_sm error!\n");
}
err = devio_register_sm (pipe, trigger_mux_id, WB_TRIGGER_MUX2_BASE_ADDR, 1);
if (err != DEVIO_SUCCESS) {
DBE_DEBUG (DBG_DEV_IO | DBG_LVL_FATAL, "[ebpm] devio_register_sm error!\n");
}
#endif #endif
#else #else
#error "BE FPGA Board not supported!" #error "BE FPGA Board not supported!"
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment