Skip to content

C
Conv TTL Blocking
Commit 22246be5 authored by Theodor-Adrian Stana's avatar Theodor-Adrian Stana
Browse files
Options

doc: Added line state readout section

parent 8eb8c4f0
Expand all Hide whitespace changes
Inline Side-by-side
Showing with 533 additions and 2 deletions
doc/ug/fig/line-stat.svg 0 → 100644
View file @ 22246be5
This diff is collapsed.
doc/ug/ug-conv-ttl-blo.tex
View file @ 22246be5
......@@ -1176,8 +1176,8 @@ These registers always store the latest time at which a pulse arrived on a chann
can be useful when other channels fill up the ring buffer before a relevant timestamp
is read.
The memory map~\ref{app:conv-regs} contains further details about the implementation of
each register.
The memory map contains further details about the contents of each register
(see Appendix~\ref{app:conv-regs-ch1ltscyr} through~\ref{app:conv-regs-ch6ltsthr}).
%------------------------------------------------------------------------------
% SUBSEC: Remote reset
......@@ -1307,6 +1307,22 @@ set when the error occurs, are shown in Table~\ref{tbl:syserr}.
}
\end{table}
%------------------------------------------------------------------------------
% SUBSEC: LSR
%------------------------------------------------------------------------------
\subsection{Line state readout}
\label{sec:diag-line-stat}
The line status register (LSR -- see Appendix~\ref{app:conv-regs-lsr}) contains bits
that show the state of the channel line at the board input. Figure~\ref{fig:line-stat}
shows a diagram of this mapping, from the board input, through the on-board circuitry,
to the LSR.
\begin{figure}[h]
\centerline{\includegraphics[width=\textwidth]{fig/line-stat}}
\caption{\label{fig:line-stat} Readout of line state at board input}
\end{figure}
%==============================================================================
% SEC: Remote reprog
%==============================================================================
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment