Page version | Author | Commit Message | Last updated | Format |
---|---|---|---|---|
cdbd8c4c | Erik van der Bij | Added points Schematics 18/19 about grids on recommendation from ML | markdown | |
fb9c5812 | Erik van der Bij | An FMC mezzanine should have a specific EEPROM (24C02 **or a 24C32**... Thanks Pieter! | markdown | |
e824d6cc | Erik van der Bij | Removed duplicated checks | markdown | |
91925c08 | Christos Gentsos | Update Schematics checklist - remove initial link to the capacitor voltage rating script | markdown | |
7ccc0b7c | Erik van der Bij | Added 4. Check if all capacitors are correctly de-rated for their operating voltage. See [Capacitor voltage rating analysis script] | markdown | |
9257872f | Christos Gentsos | Update Schematics checklist - add link to capacitor voltage rating analysis script | markdown | |
8d006753 | Erik van der Bij | Specified likely -W OHL variant | markdown | |
034b5dac | Erik van der Bij | Added link to wiki page explaining the reason for 24C02 EEPROM on FMC mezzanines | markdown | |
0d1d6d5a | Erik van der Bij | can be found in the *corresponding* 'Guide' | markdown | |
b4bbbf76 | Erik van der Bij | mycompany in italics instead of using nested quotes in that sentence | markdown | |
af8411d0 | Erik van der Bij | Documentation: updated to refer to CERN OHL v2 instead of v1.2 | markdown | |
9e6fe808 | Erik van der Bij | Remove a ) too many. Added a few dots. | markdown | |
1195eae4 | Erik van der Bij | Removed the few words that were in bold | markdown | |
53b2502c | Erik van der Bij | EEPROM type | markdown | |
594f429c | Erik van der Bij | Check BOM does not EOL components; P5V; Align components; Showclearly from which power supply each component is powered; Check and remove any DRC error flags. | markdown | |
d9cb7ba1 | Erik van der Bij | Added the only three points from "Schematics design review checklist for novices". Moved section FMC down | markdown | |
408f32a7 | Erik van der Bij | Check if direction of signals correct (i.e. hierarchy connectors, FMC uni-directional); EEPROM: should be powered by P3V3AUX, not P3V3. | markdown | |
5a0318b1 | Erik van der Bij | ** Check for this same OHL text on the mechanical drawings (front-panel and 'arrangement') | markdown | |
4740a238 | Erik van der Bij | Added: make sure that all texts, indications and annotations are written in English. | markdown | |
44401c05 | Erik van der Bij | Layout of one line | markdown |