Commit 49ea11d3 authored by Matthieu Cattin's avatar Matthieu Cattin

syn: gennum hang solved -> Synthesis with master branch of general-cores library.

no_coregen branch generic_fifo is buggy, not outputing the last written data
from time to time.
Was causing the gennum core to hang (waiting forever on the last data).
parent 25910c1a
This diff is collapsed.
This diff is collapsed.
This source diff could not be displayed because it is too large. You can view the blob instead.
This source diff could not be displayed because it is too large. You can view the blob instead.
......@@ -11,23 +11,23 @@ Target Device : xc6slx45t
Target Package : fgg484
Target Speed : -3
Mapper Version : spartan6 -- $Revision: 1.55 $
Mapped Date : Fri Nov 30 14:43:16 2012
Mapped Date : Tue Mar 5 13:58:38 2013
Design Summary
--------------
Number of errors: 0
Number of warnings: 8
Slice Logic Utilization:
Number of Slice Registers: 6,576 out of 54,576 12%
Number used as Flip Flops: 6,576
Number of Slice Registers: 6,805 out of 54,576 12%
Number used as Flip Flops: 6,805
Number used as Latches: 0
Number used as Latch-thrus: 0
Number used as AND/OR logics: 0
Number of Slice LUTs: 5,403 out of 27,288 19%
Number used as logic: 5,150 out of 27,288 18%
Number using O6 output only: 3,289
Number using O5 output only: 360
Number using O5 and O6: 1,501
Number of Slice LUTs: 5,656 out of 27,288 20%
Number used as logic: 5,168 out of 27,288 18%
Number using O6 output only: 3,262
Number using O5 output only: 280
Number using O5 and O6: 1,626
Number used as ROM: 0
Number used as Memory: 2 out of 6,408 1%
Number used as Dual Port RAM: 0
......@@ -36,21 +36,21 @@ Slice Logic Utilization:
Number using O6 output only: 2
Number using O5 output only: 0
Number using O5 and O6: 0
Number used exclusively as route-thrus: 251
Number with same-slice register load: 230
Number with same-slice carry load: 21
Number used exclusively as route-thrus: 486
Number with same-slice register load: 475
Number with same-slice carry load: 11
Number with other load: 0
Slice Logic Distribution:
Number of occupied Slices: 2,516 out of 6,822 36%
Nummber of MUXCYs used: 1,384 out of 13,644 10%
Number of LUT Flip Flop pairs used: 7,794
Number with an unused Flip Flop: 1,901 out of 7,794 24%
Number with an unused LUT: 2,391 out of 7,794 30%
Number of fully used LUT-FF pairs: 3,502 out of 7,794 44%
Number of unique control sets: 235
Number of occupied Slices: 2,412 out of 6,822 35%
Nummber of MUXCYs used: 1,424 out of 13,644 10%
Number of LUT Flip Flop pairs used: 7,602
Number with an unused Flip Flop: 1,775 out of 7,602 23%
Number with an unused LUT: 1,946 out of 7,602 25%
Number of fully used LUT-FF pairs: 3,881 out of 7,602 51%
Number of unique control sets: 260
Number of slice register sites lost
to control set restrictions: 542 out of 54,576 1%
to control set restrictions: 673 out of 54,576 1%
A LUT Flip Flop pair for this architecture represents one LUT paired with
one Flip Flop within a slice. A control set is a unique combination of
......@@ -100,11 +100,11 @@ Specific Feature Utilization:
Number of STARTUPs: 0 out of 1 0%
Number of SUSPEND_SYNCs: 0 out of 1 0%
Average Fanout of Non-Clock Nets: 3.78
Average Fanout of Non-Clock Nets: 3.79
Peak Memory Usage: 415 MB
Total REAL time to MAP completion: 4 mins 49 secs
Total CPU time to MAP completion (all processors): 4 mins 53 secs
Peak Memory Usage: 418 MB
Total REAL time to MAP completion: 4 mins 46 secs
Total CPU time to MAP completion (all processors): 4 mins 46 secs
Table of Contents
-----------------
......@@ -162,10 +162,10 @@ INFO:Map:284 - Map is running with the multi-threading option on. Map currently
INFO:LIT:243 - Logical network
cmp_ddr_ctrl/cmp_ddr3_ctrl_wrapper/gen_spec_bank3_64b_32b.cmp_ddr3_ctrl/memc3
_infrastructure_inst/rst0_sync_r<24> has no load.
INFO:LIT:395 - The above info message is repeated 9 more times for the following
INFO:LIT:395 - The above info message is repeated 8 more times for the following
(max. 5 shown):
N686,
N688,
N754,
N756,
aux_buttons_i<1>_IBUF,
aux_buttons_i<0>_IBUF,
P_WR_REQ<1>_IBUF
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment