Skip to content

F
FMC ADC 100M 14b 4cha - Software
Commit 0713849d authored by Federico Vaga's avatar Federico Vaga
Browse files
Options

doc: update documentation 

Signed-off-by: Federico Vaga's avatarFederico Vaga <federico.vaga@cern.ch>
parent 3fa4614e
Hide whitespace changes
Inline Side-by-side
Showing with 18 additions and 3 deletions
doc/driver-user.rst
View file @ 0713849d
......@@ -181,10 +181,18 @@ The ADC registers can be accessed in the proper sysfs directory. For a
card in slot 0 of bus 2 (like shown above), the directory is
*/sys/bus/zio/devices/adc-100m14b-0200*.
The overall device (*adc-100m14b*) does not offer configuration items
besides its own temperature (read-only) because configuration is
specific of the cset and the trigger, or the individual channel.
The overall device (*adc-100m14b*) provides the following attributes:
calibration_data
It is a binary attribute which allows the user to change the runt-time
calibration data (the EEPROM will not be touched). The ``fau-calibration``
tool can be used to read write calibration data.
To be consistent, this binary interface expects **only** little endian
values because this is the endianess used to store calibration data for
this device.
temperature
It shows the current temperature
The Channel Set
'''''''''''''''
......@@ -511,6 +519,13 @@ integer.
- Values
- Comments
* - device
- calibration_data
- rw
- --
-
- Run-time calibration data
* - device
- temperature
- ro
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment