Commit 4abab070 authored by Matthieu Cattin's avatar Matthieu Cattin

hdl, doc: Delete irq controller files (not used any more).

parent 691b2d75
@regsection Memory map summary
@multitable @columnfractions .10 .15 .15 .55
@headitem Address @tab Type @tab Prefix @tab Name
@item @code{0x0} @tab
REG @tab
@code{multi_irq} @tab
Multiple interrupt register
@item @code{0x4} @tab
REG @tab
@code{src} @tab
Interrupt sources register
@item @code{0x8} @tab
REG @tab
@code{en_mask} @tab
Interrupt enable mask register
@end multitable
@regsection @code{multi_irq} - Multiple interrupt register
Multiple interrupts occurs before irq source is read.@*Write '1' to clear a bit.@*@*Bit 0: DMA done.@*Bit 1: DMA error.@*Bit 2: Trigger.@*Bit 3: Acquisition end.
@multitable @columnfractions .10 .10 .15 .10 .55
@headitem Bits @tab Access @tab Prefix @tab Default @tab Name
@item @code{31...0}
@tab R/W @tab
@code{MULTI_IRQ}
@tab @code{X} @tab
Multiple interrupt
@end multitable
@regsection @code{src} - Interrupt sources register
Indicates the interrupt source.@*Write '1' to clear a bit.@*@*Bit 0: DMA done.@*Bit 1: DMA error.@*Bit 2: Trigger.@*Bit 3: Acquisition end.
@multitable @columnfractions .10 .10 .15 .10 .55
@headitem Bits @tab Access @tab Prefix @tab Default @tab Name
@item @code{31...0}
@tab R/W @tab
@code{SRC}
@tab @code{X} @tab
Interrupt sources
@end multitable
@regsection @code{en_mask} - Interrupt enable mask register
Bit mask to independently enable interrupt sources.@*@*Bit 0: DMA done.@*Bit 1: DMA error.@*Bit 2: Trigger.@*Bit 3: Acquisition end.
@multitable @columnfractions .10 .10 .15 .10 .55
@headitem Bits @tab Access @tab Prefix @tab Default @tab Name
@item @code{31...0}
@tab R/W @tab
@code{EN_MASK}
@tab @code{0} @tab
Interrupt enable mask
@end multitable
@regsection Memory map summary
@multitable @columnfractions .10 .15 .15 .55
@headitem Address @tab Type @tab Prefix @tab Name
@item @code{0x0} @tab
REG @tab
@code{EIC_IDR} @tab
Interrupt disable register
@item @code{0x4} @tab
REG @tab
@code{EIC_IER} @tab
Interrupt enable register
@item @code{0x8} @tab
REG @tab
@code{EIC_IMR} @tab
Interrupt mask register
@item @code{0xc} @tab
REG @tab
@code{EIC_ISR} @tab
Interrupt status register
@end multitable
@regsection @code{EIC_IDR} - Interrupt disable register
Writing 1 disables handling of the interrupt associated with corresponding bit. Writin 0 has no effect.
@multitable @columnfractions .10 .10 .15 .10 .55
@headitem Bits @tab Access @tab Prefix @tab Default @tab Name
@item @code{0}
@tab W/O @tab
@code{FMC0_TRIG}
@tab @code{0} @tab
FMC slot 1 trigger interrupt
@item @code{1}
@tab W/O @tab
@code{FMC0_ACQ_END}
@tab @code{0} @tab
FMC slot 1 end of acquisition interrupt
@item @code{2}
@tab W/O @tab
@code{FMC1_TRIG}
@tab @code{0} @tab
FMC slot 2 trigger interrupt
@item @code{3}
@tab W/O @tab
@code{FMC1_ACQ_END}
@tab @code{0} @tab
FMC slot 2 end of acquisition interrupt
@end multitable
@multitable @columnfractions 0.15 0.85
@headitem Field @tab Description
@item @code{fmc0_trig} @tab write 1: disable interrupt 'FMC slot 1 trigger interrupt'@*write 0: no effect
@item @code{fmc0_acq_end} @tab write 1: disable interrupt 'FMC slot 1 end of acquisition interrupt'@*write 0: no effect
@item @code{fmc1_trig} @tab write 1: disable interrupt 'FMC slot 2 trigger interrupt'@*write 0: no effect
@item @code{fmc1_acq_end} @tab write 1: disable interrupt 'FMC slot 2 end of acquisition interrupt'@*write 0: no effect
@end multitable
@regsection @code{EIC_IER} - Interrupt enable register
Writing 1 enables handling of the interrupt associated with corresponding bit. Writin 0 has no effect.
@multitable @columnfractions .10 .10 .15 .10 .55
@headitem Bits @tab Access @tab Prefix @tab Default @tab Name
@item @code{0}
@tab W/O @tab
@code{FMC0_TRIG}
@tab @code{0} @tab
FMC slot 1 trigger interrupt
@item @code{1}
@tab W/O @tab
@code{FMC0_ACQ_END}
@tab @code{0} @tab
FMC slot 1 end of acquisition interrupt
@item @code{2}
@tab W/O @tab
@code{FMC1_TRIG}
@tab @code{0} @tab
FMC slot 2 trigger interrupt
@item @code{3}
@tab W/O @tab
@code{FMC1_ACQ_END}
@tab @code{0} @tab
FMC slot 2 end of acquisition interrupt
@end multitable
@multitable @columnfractions 0.15 0.85
@headitem Field @tab Description
@item @code{fmc0_trig} @tab write 1: enable interrupt 'FMC slot 1 trigger interrupt'@*write 0: no effect
@item @code{fmc0_acq_end} @tab write 1: enable interrupt 'FMC slot 1 end of acquisition interrupt'@*write 0: no effect
@item @code{fmc1_trig} @tab write 1: enable interrupt 'FMC slot 2 trigger interrupt'@*write 0: no effect
@item @code{fmc1_acq_end} @tab write 1: enable interrupt 'FMC slot 2 end of acquisition interrupt'@*write 0: no effect
@end multitable
@regsection @code{EIC_IMR} - Interrupt mask register
Shows which interrupts are enabled. 1 means that the interrupt associated with the bitfield is enabled
@multitable @columnfractions .10 .10 .15 .10 .55
@headitem Bits @tab Access @tab Prefix @tab Default @tab Name
@item @code{0}
@tab R/O @tab
@code{FMC0_TRIG}
@tab @code{X} @tab
FMC slot 1 trigger interrupt
@item @code{1}
@tab R/O @tab
@code{FMC0_ACQ_END}
@tab @code{X} @tab
FMC slot 1 end of acquisition interrupt
@item @code{2}
@tab R/O @tab
@code{FMC1_TRIG}
@tab @code{X} @tab
FMC slot 2 trigger interrupt
@item @code{3}
@tab R/O @tab
@code{FMC1_ACQ_END}
@tab @code{X} @tab
FMC slot 2 end of acquisition interrupt
@end multitable
@multitable @columnfractions 0.15 0.85
@headitem Field @tab Description
@item @code{fmc0_trig} @tab read 1: interrupt 'FMC slot 1 trigger interrupt' is enabled@*read 0: interrupt 'FMC slot 1 trigger interrupt' is disabled
@item @code{fmc0_acq_end} @tab read 1: interrupt 'FMC slot 1 end of acquisition interrupt' is enabled@*read 0: interrupt 'FMC slot 1 end of acquisition interrupt' is disabled
@item @code{fmc1_trig} @tab read 1: interrupt 'FMC slot 2 trigger interrupt' is enabled@*read 0: interrupt 'FMC slot 2 trigger interrupt' is disabled
@item @code{fmc1_acq_end} @tab read 1: interrupt 'FMC slot 2 end of acquisition interrupt' is enabled@*read 0: interrupt 'FMC slot 2 end of acquisition interrupt' is disabled
@end multitable
@regsection @code{EIC_ISR} - Interrupt status register
Each bit represents the state of corresponding interrupt. 1 means the interrupt is pending. Writing 1 to a bit clears the corresponding interrupt. Writing 0 has no effect.
@multitable @columnfractions .10 .10 .15 .10 .55
@headitem Bits @tab Access @tab Prefix @tab Default @tab Name
@item @code{0}
@tab R/W @tab
@code{FMC0_TRIG}
@tab @code{X} @tab
FMC slot 1 trigger interrupt
@item @code{1}
@tab R/W @tab
@code{FMC0_ACQ_END}
@tab @code{X} @tab
FMC slot 1 end of acquisition interrupt
@item @code{2}
@tab R/W @tab
@code{FMC1_TRIG}
@tab @code{X} @tab
FMC slot 2 trigger interrupt
@item @code{3}
@tab R/W @tab
@code{FMC1_ACQ_END}
@tab @code{X} @tab
FMC slot 2 end of acquisition interrupt
@end multitable
@multitable @columnfractions 0.15 0.85
@headitem Field @tab Description
@item @code{fmc0_trig} @tab read 1: interrupt 'FMC slot 1 trigger interrupt' is pending@*read 0: interrupt not pending@*write 1: clear interrupt 'FMC slot 1 trigger interrupt'@*write 0: no effect
@item @code{fmc0_acq_end} @tab read 1: interrupt 'FMC slot 1 end of acquisition interrupt' is pending@*read 0: interrupt not pending@*write 1: clear interrupt 'FMC slot 1 end of acquisition interrupt'@*write 0: no effect
@item @code{fmc1_trig} @tab read 1: interrupt 'FMC slot 2 trigger interrupt' is pending@*read 0: interrupt not pending@*write 1: clear interrupt 'FMC slot 2 trigger interrupt'@*write 0: no effect
@item @code{fmc1_acq_end} @tab read 1: interrupt 'FMC slot 2 end of acquisition interrupt' is pending@*read 0: interrupt not pending@*write 1: clear interrupt 'FMC slot 2 end of acquisition interrupt'@*write 0: no effect
@end multitable
This diff is collapsed.
---------------------------------------------------------------------------------------
-- Title : Wishbone slave core for IRQ controller registers
---------------------------------------------------------------------------------------
-- File : ../rtl/svec_irq_controller_regs.vhd
-- Author : auto-generated by wbgen2 from svec_irq_controller_regs.wb
-- Created : Fri Jul 5 10:18:32 2013
-- Standard : VHDL'87
---------------------------------------------------------------------------------------
-- THIS FILE WAS GENERATED BY wbgen2 FROM SOURCE FILE svec_irq_controller_regs.wb
-- DO NOT HAND-EDIT UNLESS IT'S ABSOLUTELY NECESSARY!
---------------------------------------------------------------------------------------
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity irq_controller_regs is
port (
rst_n_i : in std_logic;
clk_sys_i : in std_logic;
wb_adr_i : in std_logic_vector(1 downto 0);
wb_dat_i : in std_logic_vector(31 downto 0);
wb_dat_o : out std_logic_vector(31 downto 0);
wb_cyc_i : in std_logic;
wb_sel_i : in std_logic_vector(3 downto 0);
wb_stb_i : in std_logic;
wb_we_i : in std_logic;
wb_ack_o : out std_logic;
wb_stall_o : out std_logic;
-- Port for std_logic_vector field: 'Multiple interrupt' in reg: 'Multiple interrupt register'
irq_ctrl_multi_irq_o : out std_logic_vector(31 downto 0);
irq_ctrl_multi_irq_i : in std_logic_vector(31 downto 0);
irq_ctrl_multi_irq_load_o : out std_logic;
-- Port for std_logic_vector field: 'Interrupt sources' in reg: 'Interrupt sources register '
irq_ctrl_src_o : out std_logic_vector(31 downto 0);
irq_ctrl_src_i : in std_logic_vector(31 downto 0);
irq_ctrl_src_load_o : out std_logic;
-- Port for std_logic_vector field: 'Interrupt enable mask' in reg: 'Interrupt enable mask register'
irq_ctrl_en_mask_o : out std_logic_vector(31 downto 0)
);
end irq_controller_regs;
architecture syn of irq_controller_regs is
signal irq_ctrl_en_mask_int : std_logic_vector(31 downto 0);
signal ack_sreg : std_logic_vector(9 downto 0);
signal rddata_reg : std_logic_vector(31 downto 0);
signal wrdata_reg : std_logic_vector(31 downto 0);
signal bwsel_reg : std_logic_vector(3 downto 0);
signal rwaddr_reg : std_logic_vector(1 downto 0);
signal ack_in_progress : std_logic ;
signal wr_int : std_logic ;
signal rd_int : std_logic ;
signal allones : std_logic_vector(31 downto 0);
signal allzeros : std_logic_vector(31 downto 0);
begin
-- Some internal signals assignments. For (foreseen) compatibility with other bus standards.
wrdata_reg <= wb_dat_i;
bwsel_reg <= wb_sel_i;
rd_int <= wb_cyc_i and (wb_stb_i and (not wb_we_i));
wr_int <= wb_cyc_i and (wb_stb_i and wb_we_i);
allones <= (others => '1');
allzeros <= (others => '0');
--
-- Main register bank access process.
process (clk_sys_i, rst_n_i)
begin
if (rst_n_i = '0') then
ack_sreg <= "0000000000";
ack_in_progress <= '0';
rddata_reg <= "00000000000000000000000000000000";
irq_ctrl_multi_irq_load_o <= '0';
irq_ctrl_src_load_o <= '0';
irq_ctrl_en_mask_int <= "00000000000000000000000000000000";
elsif rising_edge(clk_sys_i) then
-- advance the ACK generator shift register
ack_sreg(8 downto 0) <= ack_sreg(9 downto 1);
ack_sreg(9) <= '0';
if (ack_in_progress = '1') then
if (ack_sreg(0) = '1') then
irq_ctrl_multi_irq_load_o <= '0';
irq_ctrl_src_load_o <= '0';
ack_in_progress <= '0';
else
irq_ctrl_multi_irq_load_o <= '0';
irq_ctrl_src_load_o <= '0';
end if;
else
if ((wb_cyc_i = '1') and (wb_stb_i = '1')) then
case rwaddr_reg(1 downto 0) is
when "00" =>
if (wb_we_i = '1') then
irq_ctrl_multi_irq_load_o <= '1';
end if;
rddata_reg(31 downto 0) <= irq_ctrl_multi_irq_i;
ack_sreg(0) <= '1';
ack_in_progress <= '1';
when "01" =>
if (wb_we_i = '1') then
irq_ctrl_src_load_o <= '1';
end if;
rddata_reg(31 downto 0) <= irq_ctrl_src_i;
ack_sreg(0) <= '1';
ack_in_progress <= '1';
when "10" =>
if (wb_we_i = '1') then
irq_ctrl_en_mask_int <= wrdata_reg(31 downto 0);
end if;
rddata_reg(31 downto 0) <= irq_ctrl_en_mask_int;
ack_sreg(0) <= '1';
ack_in_progress <= '1';
when others =>
-- prevent the slave from hanging the bus on invalid address
ack_in_progress <= '1';
ack_sreg(0) <= '1';
end case;
end if;
end if;
end if;
end process;
-- Drive the data output bus
wb_dat_o <= rddata_reg;
-- Multiple interrupt
irq_ctrl_multi_irq_o <= wrdata_reg(31 downto 0);
-- Interrupt sources
irq_ctrl_src_o <= wrdata_reg(31 downto 0);
-- Interrupt enable mask
irq_ctrl_en_mask_o <= irq_ctrl_en_mask_int;
rwaddr_reg <= wb_adr_i;
wb_stall_o <= (not ack_sreg(0)) and (wb_stb_i and wb_cyc_i);
-- ACK signal generation. Just pass the LSB of ACK counter.
wb_ack_o <= ack_sreg(0);
end syn;
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment