Commit 53b533d6 authored by Matthieu Cattin's avatar Matthieu Cattin

hdl: Update fmc adc eic sdb records (with same data as in spec version).

parent c8f1f47a
......@@ -364,7 +364,7 @@ architecture rtl of svec_top_fmc_adc_100Ms is
date => x"20121116",
name => "WB-Timetag-Core ")));
constant c_wb_eic_sdb : t_sdb_device := (
constant c_wb_fmc_adc_eic_sdb : t_sdb_device := (
abi_class => x"0000", -- undocumented device
abi_ver_major => x"01",
abi_ver_minor => x"01",
......@@ -375,10 +375,10 @@ architecture rtl of svec_top_fmc_adc_100Ms is
addr_last => x"000000000000000F",
product => (
vendor_id => x"000000000000CE42", -- CERN
device_id => x"00000605",
device_id => x"26ec6086", -- "WB-FMC-ADC.EIC " | md5sum | cut -c1-8
version => x"00000001",
date => x"20121116",
name => "WB-Int.Control ")));
date => x"20131204",
name => "WB-FMC-ADC.EIC ")));
constant c_wb_ddr_dat_sdb : t_sdb_device := (
abi_class => x"0000", -- undocumented device
......@@ -427,12 +427,12 @@ architecture rtl of svec_top_fmc_adc_100Ms is
1 => f_sdb_embed_device(c_xwb_onewire_master_sdb, x"00001100"),
2 => f_sdb_embed_device(c_wb_svec_csr_sdb, x"00001200"),
3 => f_sdb_embed_device(c_xwb_vic_sdb, x"00001300"),
4 => f_sdb_embed_device(c_wb_eic_sdb, x"00002000"),
4 => f_sdb_embed_device(c_wb_fmc_adc_eic_sdb, x"00002000"),
5 => f_sdb_embed_device(c_wb_timetag_sdb, x"00002100"),
6 => f_sdb_embed_device(c_wb_ddr_adr_sdb, x"00002200"),
7 => f_sdb_embed_device(c_wb_ddr_dat_sdb, x"00003000"),
8 => f_sdb_embed_bridge(c_fmc0_bridge_sdb, x"00004000"),
9 => f_sdb_embed_device(c_wb_eic_sdb, x"00006000"),
9 => f_sdb_embed_device(c_wb_fmc_adc_eic_sdb, x"00006000"),
10 => f_sdb_embed_device(c_wb_timetag_sdb, x"00006100"),
11 => f_sdb_embed_device(c_wb_ddr_adr_sdb, x"00006200"),
12 => f_sdb_embed_device(c_wb_ddr_dat_sdb, x"00007000"),
......@@ -1298,7 +1298,7 @@ begin
-- The counter is incremented on the falling edge of cyc. This is because the ddr controller
-- samples the address on (cyc_re and stb)+1
p_ddr0_dat_cyc: process (sys_clk_125)
p_ddr0_dat_cyc : process (sys_clk_125)
begin
if rising_edge(sys_clk_125) then
if fmc0_rst_n = '0' then
......@@ -1450,7 +1450,7 @@ begin
-- The counter is incremented on the falling edge of cyc. This is because the ddr controller
-- samples the address on (cyc_re and stb)+1
p_ddr1_dat_cyc: process (sys_clk_125)
p_ddr1_dat_cyc : process (sys_clk_125)
begin
if rising_edge(sys_clk_125) then
if fmc1_rst_n = '0' then
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment