Commit 5ce446b5 authored by Matthieu Cattin's avatar Matthieu Cattin

hdl: Add spexi top hdl design (Note that it's not compliant to the latest…

hdl: Add spexi top hdl design (Note that it's not compliant to the latest architecture and gnum core, yet).
parent ada415a2
files = [
"spexi_top_fmc_adc_100Ms.vhd",
"carrier_csr.vhd",
"utc_core_regs.vhd",
"utc_core.vhd",
"irq_controller_regs.vhd",
"irq_controller.vhd"];
---------------------------------------------------------------------------------------
-- Title : Wishbone slave core for Carrier control and status registers
---------------------------------------------------------------------------------------
-- File : ../rtl/carrier_csr.vhd
-- Author : auto-generated by wbgen2 from carrier_csr.wb
-- Created : Wed Nov 23 09:30:44 2011
-- Standard : VHDL'87
---------------------------------------------------------------------------------------
-- THIS FILE WAS GENERATED BY wbgen2 FROM SOURCE FILE carrier_csr.wb
-- DO NOT HAND-EDIT UNLESS IT'S ABSOLUTELY NECESSARY!
---------------------------------------------------------------------------------------
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity carrier_csr is
port (
rst_n_i : in std_logic;
wb_clk_i : in std_logic;
wb_addr_i : in std_logic_vector(2 downto 0);
wb_data_i : in std_logic_vector(31 downto 0);
wb_data_o : out std_logic_vector(31 downto 0);
wb_cyc_i : in std_logic;
wb_sel_i : in std_logic_vector(3 downto 0);
wb_stb_i : in std_logic;
wb_we_i : in std_logic;
wb_ack_o : out std_logic;
-- Port for std_logic_vector field: 'PCB revision' in reg: 'Carrier type and PCB version'
carrier_csr_carrier_pcb_rev_i : in std_logic_vector(3 downto 0);
-- Port for std_logic_vector field: 'Reserved register' in reg: 'Carrier type and PCB version'
carrier_csr_carrier_reserved_i : in std_logic_vector(11 downto 0);
-- Port for std_logic_vector field: 'Carrier type' in reg: 'Carrier type and PCB version'
carrier_csr_carrier_type_i : in std_logic_vector(15 downto 0);
-- Port for std_logic_vector field: 'Bitstream type' in reg: 'Bitstream type'
carrier_csr_bitstream_type_i : in std_logic_vector(31 downto 0);
-- Port for std_logic_vector field: 'Bitstream date' in reg: 'Bitstream date'
carrier_csr_bitstream_date_i : in std_logic_vector(31 downto 0);
-- Port for BIT field: 'FMC presence' in reg: 'Status'
carrier_csr_stat_fmc_pres_i : in std_logic;
-- Port for BIT field: 'GN4142 core P2L PLL status' in reg: 'Status'
carrier_csr_stat_p2l_pll_lck_i : in std_logic;
-- Port for BIT field: 'System clock PLL status' in reg: 'Status'
carrier_csr_stat_sys_pll_lck_i : in std_logic;
-- Port for BIT field: 'DDR3 calibration status' in reg: 'Status'
carrier_csr_stat_ddr3_cal_done_i : in std_logic;
-- Port for std_logic_vector field: 'Reserved' in reg: 'Status'
carrier_csr_stat_reserved_i : in std_logic_vector(27 downto 0);
-- Port for BIT field: 'Green LED' in reg: 'Control'
carrier_csr_ctrl_led_green_o : out std_logic;
-- Port for BIT field: 'Red LED' in reg: 'Control'
carrier_csr_ctrl_led_red_o : out std_logic;
-- Port for BIT field: 'DAC clear' in reg: 'Control'
carrier_csr_ctrl_dac_clr_n_o : out std_logic;
-- Port for std_logic_vector field: 'Reserved' in reg: 'Control'
carrier_csr_ctrl_reserved_o : out std_logic_vector(28 downto 0)
);
end carrier_csr;
architecture syn of carrier_csr is
signal carrier_csr_ctrl_led_green_int : std_logic ;
signal carrier_csr_ctrl_led_red_int : std_logic ;
signal carrier_csr_ctrl_dac_clr_n_int : std_logic ;
signal carrier_csr_ctrl_reserved_int : std_logic_vector(28 downto 0);
signal ack_sreg : std_logic_vector(9 downto 0);
signal rddata_reg : std_logic_vector(31 downto 0);
signal wrdata_reg : std_logic_vector(31 downto 0);
signal bwsel_reg : std_logic_vector(3 downto 0);
signal rwaddr_reg : std_logic_vector(2 downto 0);
signal ack_in_progress : std_logic ;
signal wr_int : std_logic ;
signal rd_int : std_logic ;
signal bus_clock_int : std_logic ;
signal allones : std_logic_vector(31 downto 0);
signal allzeros : std_logic_vector(31 downto 0);
begin
-- Some internal signals assignments. For (foreseen) compatibility with other bus standards.
wrdata_reg <= wb_data_i;
bwsel_reg <= wb_sel_i;
bus_clock_int <= wb_clk_i;
rd_int <= wb_cyc_i and (wb_stb_i and (not wb_we_i));
wr_int <= wb_cyc_i and (wb_stb_i and wb_we_i);
allones <= (others => '1');
allzeros <= (others => '0');
--
-- Main register bank access process.
process (bus_clock_int, rst_n_i)
begin
if (rst_n_i = '0') then
ack_sreg <= "0000000000";
ack_in_progress <= '0';
rddata_reg <= "00000000000000000000000000000000";
carrier_csr_ctrl_led_green_int <= '0';
carrier_csr_ctrl_led_red_int <= '0';
carrier_csr_ctrl_dac_clr_n_int <= '0';
carrier_csr_ctrl_reserved_int <= "00000000000000000000000000000";
elsif rising_edge(bus_clock_int) then
-- advance the ACK generator shift register
ack_sreg(8 downto 0) <= ack_sreg(9 downto 1);
ack_sreg(9) <= '0';
if (ack_in_progress = '1') then
if (ack_sreg(0) = '1') then
ack_in_progress <= '0';
else
end if;
else
if ((wb_cyc_i = '1') and (wb_stb_i = '1')) then
case rwaddr_reg(2 downto 0) is
when "000" =>
if (wb_we_i = '1') then
else
rddata_reg(3 downto 0) <= carrier_csr_carrier_pcb_rev_i;
rddata_reg(15 downto 4) <= carrier_csr_carrier_reserved_i;
rddata_reg(31 downto 16) <= carrier_csr_carrier_type_i;
end if;
ack_sreg(0) <= '1';
ack_in_progress <= '1';
when "001" =>
if (wb_we_i = '1') then
else
rddata_reg(31 downto 0) <= carrier_csr_bitstream_type_i;
end if;
ack_sreg(0) <= '1';
ack_in_progress <= '1';
when "010" =>
if (wb_we_i = '1') then
else
rddata_reg(31 downto 0) <= carrier_csr_bitstream_date_i;
end if;
ack_sreg(0) <= '1';
ack_in_progress <= '1';
when "011" =>
if (wb_we_i = '1') then
else
rddata_reg(0) <= carrier_csr_stat_fmc_pres_i;
rddata_reg(1) <= carrier_csr_stat_p2l_pll_lck_i;
rddata_reg(2) <= carrier_csr_stat_sys_pll_lck_i;
rddata_reg(3) <= carrier_csr_stat_ddr3_cal_done_i;
rddata_reg(31 downto 4) <= carrier_csr_stat_reserved_i;
end if;
ack_sreg(0) <= '1';
ack_in_progress <= '1';
when "100" =>
if (wb_we_i = '1') then
carrier_csr_ctrl_led_green_int <= wrdata_reg(0);
carrier_csr_ctrl_led_red_int <= wrdata_reg(1);
carrier_csr_ctrl_dac_clr_n_int <= wrdata_reg(2);
carrier_csr_ctrl_reserved_int <= wrdata_reg(31 downto 3);
else
rddata_reg(0) <= carrier_csr_ctrl_led_green_int;
rddata_reg(1) <= carrier_csr_ctrl_led_red_int;
rddata_reg(2) <= carrier_csr_ctrl_dac_clr_n_int;
rddata_reg(31 downto 3) <= carrier_csr_ctrl_reserved_int;
end if;
ack_sreg(0) <= '1';
ack_in_progress <= '1';
when others =>
-- prevent the slave from hanging the bus on invalid address
ack_in_progress <= '1';
ack_sreg(0) <= '1';
end case;
end if;
end if;
end if;
end process;
-- Drive the data output bus
wb_data_o <= rddata_reg;
-- PCB revision
-- Reserved register
-- Carrier type
-- Bitstream type
-- Bitstream date
-- FMC presence
-- GN4142 core P2L PLL status
-- System clock PLL status
-- DDR3 calibration status
-- Reserved
-- Green LED
carrier_csr_ctrl_led_green_o <= carrier_csr_ctrl_led_green_int;
-- Red LED
carrier_csr_ctrl_led_red_o <= carrier_csr_ctrl_led_red_int;
-- DAC clear
carrier_csr_ctrl_dac_clr_n_o <= carrier_csr_ctrl_dac_clr_n_int;
-- Reserved
carrier_csr_ctrl_reserved_o <= carrier_csr_ctrl_reserved_int;
rwaddr_reg <= wb_addr_i;
-- ACK signal generation. Just pass the LSB of ACK counter.
wb_ack_o <= ack_sreg(0);
end syn;
--------------------------------------------------------------------------------
-- CERN (BE-CO-HT)
-- IRQ controller
-- http://www.ohwr.org/projects/fmc-adc-100m14b4cha
--------------------------------------------------------------------------------
--
-- unit name: irq_controller (irq_controller.vhd)
--
-- author: Matthieu Cattin (matthieu.cattin@cern.ch)
--
-- date: 18-11-2011
--
-- version: 1.0
--
-- description:
--
-- dependencies:
--
--------------------------------------------------------------------------------
-- GNU LESSER GENERAL PUBLIC LICENSE
--------------------------------------------------------------------------------
-- This source file is free software; you can redistribute it and/or modify it
-- under the terms of the GNU Lesser General Public License as published by the
-- Free Software Foundation; either version 2.1 of the License, or (at your
-- option) any later version. This source is distributed in the hope that it
-- will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty
-- of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
-- See the GNU Lesser General Public License for more details. You should have
-- received a copy of the GNU Lesser General Public License along with this
-- source; if not, download it from http://www.gnu.org/licenses/lgpl-2.1.html
--------------------------------------------------------------------------------
-- last changes: see svn log.
--------------------------------------------------------------------------------
-- TODO: -
--------------------------------------------------------------------------------
library IEEE;
use IEEE.STD_LOGIC_1164.all;
use IEEE.NUMERIC_STD.all;
--library UNISIM;
--use UNISIM.vcomponents.all;
entity irq_controller is
port (
-- Clock, reset
clk_i : in std_logic;
rst_n_i : in std_logic;
-- Interrupt sources input, must be 1 clk_i tick long
irq_src_p_i : in std_logic_vector(31 downto 0);
-- IRQ pulse output
irq_p_o : out std_logic;
-- Wishbone interface
wb_adr_i : in std_logic_vector(1 downto 0);
wb_dat_i : in std_logic_vector(31 downto 0);
wb_dat_o : out std_logic_vector(31 downto 0);
wb_cyc_i : in std_logic;
wb_sel_i : in std_logic_vector(3 downto 0);
wb_stb_i : in std_logic;
wb_we_i : in std_logic;
wb_ack_o : out std_logic
);
end irq_controller;
architecture rtl of irq_controller is
------------------------------------------------------------------------------
-- Components declaration
------------------------------------------------------------------------------
component irq_controller_regs
port (
rst_n_i : in std_logic;
wb_clk_i : in std_logic;
wb_addr_i : in std_logic_vector(1 downto 0);
wb_data_i : in std_logic_vector(31 downto 0);
wb_data_o : out std_logic_vector(31 downto 0);
wb_cyc_i : in std_logic;
wb_sel_i : in std_logic_vector(3 downto 0);
wb_stb_i : in std_logic;
wb_we_i : in std_logic;
wb_ack_o : out std_logic;
irq_ctrl_multi_irq_o : out std_logic_vector(31 downto 0);
irq_ctrl_multi_irq_i : in std_logic_vector(31 downto 0);
irq_ctrl_multi_irq_load_o : out std_logic;
irq_ctrl_src_o : out std_logic_vector(31 downto 0);
irq_ctrl_src_i : in std_logic_vector(31 downto 0);
irq_ctrl_src_load_o : out std_logic;
irq_ctrl_en_mask_o : out std_logic_vector(31 downto 0)
);
end component irq_controller_regs;
------------------------------------------------------------------------------
-- Signals declaration
------------------------------------------------------------------------------
signal irq_en_mask : std_logic_vector(31 downto 0);
signal irq_pending : std_logic_vector(31 downto 0);
signal irq_pending_d : std_logic_vector(31 downto 0);
signal irq_pending_re : std_logic_vector(31 downto 0);
signal irq_src_rst : std_logic_vector(31 downto 0);
signal irq_src_rst_en : std_logic;
signal multi_irq : std_logic_vector(31 downto 0);
signal multi_irq_rst : std_logic_vector(31 downto 0);
signal multi_irq_rst_en : std_logic;
signal irq_p_or : std_logic_vector(32 downto 0);
begin
------------------------------------------------------------------------------
-- Wishbone interface to IRQ controller registers
------------------------------------------------------------------------------
cmp_irq_controller_regs : irq_controller_regs
port map(
rst_n_i => rst_n_i,
wb_clk_i => clk_i,
wb_addr_i => wb_adr_i,
wb_data_i => wb_dat_i,
wb_data_o => wb_dat_o,
wb_cyc_i => wb_cyc_i,
wb_sel_i => wb_sel_i,
wb_stb_i => wb_stb_i,
wb_we_i => wb_we_i,
wb_ack_o => wb_ack_o,
irq_ctrl_multi_irq_o => multi_irq_rst,
irq_ctrl_multi_irq_load_o => multi_irq_rst_en,
irq_ctrl_multi_irq_i => multi_irq,
irq_ctrl_src_o => irq_src_rst,
irq_ctrl_src_i => irq_pending,
irq_ctrl_src_load_o => irq_src_rst_en,
irq_ctrl_en_mask_o => irq_en_mask
);
------------------------------------------------------------------------------
-- Register interrupt sources
-- IRQ is pending until a '1' is written to the corresponding bit
------------------------------------------------------------------------------
p_irq_src : process (clk_i)
begin
if rising_edge(clk_i) then
for I in 0 to irq_pending'length-1 loop
if rst_n_i = '0' then
irq_pending(I) <= '0';
elsif irq_src_p_i(I) = '1' then
irq_pending(I) <= '1';
elsif irq_src_rst_en = '1' and irq_src_rst(I) = '1' then
irq_pending(I) <= '0';
end if;
end loop; -- I
end if;
end process p_irq_src;
------------------------------------------------------------------------------
-- Multiple interrupt detection
-- Rise a flag if an interrupt occurs while an irq is still pending
-- Write '1' to the flag to clear it
------------------------------------------------------------------------------
p_multi_irq_detect : process (clk_i)
begin
if rising_edge(clk_i) then
for I in 0 to multi_irq'length-1 loop
if rst_n_i = '0' then
multi_irq(I) <= '0';
elsif irq_src_p_i(I) = '1' and irq_pending(I) = '1' then
multi_irq(I) <= '1';
elsif multi_irq_rst_en = '1' and multi_irq_rst(I) = '1' then
multi_irq(I) <= '0';
end if;
end loop; -- I
end if;
end process p_multi_irq_detect;
------------------------------------------------------------------------------
-- Generate IRQ output pulse
------------------------------------------------------------------------------
irq_p_or(0) <= '0';
l_irq_out_pulse : for I in 0 to irq_src_p_i'length-1 generate
irq_p_or(I+1) <= irq_p_or(I) or (irq_src_p_i(I) and irq_en_mask(I));
end generate l_irq_out_pulse;
p_irq_out_pulse : process (clk_i)
begin
if rising_edge(clk_i) then
if rst_n_i = '0' then
irq_p_o <= '0';
else
irq_p_o <= irq_p_or(32);
end if;
end if;
end process p_irq_out_pulse;
end rtl;
---------------------------------------------------------------------------------------
-- Title : Wishbone slave core for IRQ controller registers
---------------------------------------------------------------------------------------
-- File : ../rtl/irq_controller_regs.vhd
-- Author : auto-generated by wbgen2 from irq_controller_regs.wb
-- Created : Wed Jan 18 09:43:55 2012
-- Standard : VHDL'87
---------------------------------------------------------------------------------------
-- THIS FILE WAS GENERATED BY wbgen2 FROM SOURCE FILE irq_controller_regs.wb
-- DO NOT HAND-EDIT UNLESS IT'S ABSOLUTELY NECESSARY!
---------------------------------------------------------------------------------------
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity irq_controller_regs is
port (
rst_n_i : in std_logic;
wb_clk_i : in std_logic;
wb_addr_i : in std_logic_vector(1 downto 0);
wb_data_i : in std_logic_vector(31 downto 0);
wb_data_o : out std_logic_vector(31 downto 0);
wb_cyc_i : in std_logic;
wb_sel_i : in std_logic_vector(3 downto 0);
wb_stb_i : in std_logic;
wb_we_i : in std_logic;
wb_ack_o : out std_logic;
-- Port for std_logic_vector field: 'Multiple interrupt' in reg: 'Multiple interrupt register'
irq_ctrl_multi_irq_o : out std_logic_vector(31 downto 0);
irq_ctrl_multi_irq_i : in std_logic_vector(31 downto 0);
irq_ctrl_multi_irq_load_o : out std_logic;
-- Port for std_logic_vector field: 'Interrupt sources' in reg: 'Interrupt sources register '
irq_ctrl_src_o : out std_logic_vector(31 downto 0);
irq_ctrl_src_i : in std_logic_vector(31 downto 0);
irq_ctrl_src_load_o : out std_logic;
-- Port for std_logic_vector field: 'Interrupt enable mask' in reg: 'Interrupt enable mask register'
irq_ctrl_en_mask_o : out std_logic_vector(31 downto 0)
);
end irq_controller_regs;
architecture syn of irq_controller_regs is
signal irq_ctrl_en_mask_int : std_logic_vector(31 downto 0);
signal ack_sreg : std_logic_vector(9 downto 0);
signal rddata_reg : std_logic_vector(31 downto 0);
signal wrdata_reg : std_logic_vector(31 downto 0);
signal bwsel_reg : std_logic_vector(3 downto 0);
signal rwaddr_reg : std_logic_vector(1 downto 0);
signal ack_in_progress : std_logic ;
signal wr_int : std_logic ;
signal rd_int : std_logic ;
signal bus_clock_int : std_logic ;
signal allones : std_logic_vector(31 downto 0);
signal allzeros : std_logic_vector(31 downto 0);
begin
-- Some internal signals assignments. For (foreseen) compatibility with other bus standards.
wrdata_reg <= wb_data_i;
bwsel_reg <= wb_sel_i;
bus_clock_int <= wb_clk_i;
rd_int <= wb_cyc_i and (wb_stb_i and (not wb_we_i));
wr_int <= wb_cyc_i and (wb_stb_i and wb_we_i);
allones <= (others => '1');
allzeros <= (others => '0');
--
-- Main register bank access process.
process (bus_clock_int, rst_n_i)
begin
if (rst_n_i = '0') then
ack_sreg <= "0000000000";
ack_in_progress <= '0';
rddata_reg <= "00000000000000000000000000000000";
irq_ctrl_multi_irq_load_o <= '0';
irq_ctrl_src_load_o <= '0';
irq_ctrl_en_mask_int <= "00000000000000000000000000000000";
elsif rising_edge(bus_clock_int) then
-- advance the ACK generator shift register
ack_sreg(8 downto 0) <= ack_sreg(9 downto 1);
ack_sreg(9) <= '0';
if (ack_in_progress = '1') then
if (ack_sreg(0) = '1') then
irq_ctrl_multi_irq_load_o <= '0';
irq_ctrl_src_load_o <= '0';
ack_in_progress <= '0';
else
irq_ctrl_multi_irq_load_o <= '0';
irq_ctrl_src_load_o <= '0';
end if;
else
if ((wb_cyc_i = '1') and (wb_stb_i = '1')) then
case rwaddr_reg(1 downto 0) is
when "00" =>
if (wb_we_i = '1') then
irq_ctrl_multi_irq_load_o <= '1';
else
rddata_reg(31 downto 0) <= irq_ctrl_multi_irq_i;
end if;
ack_sreg(0) <= '1';
ack_in_progress <= '1';
when "01" =>
if (wb_we_i = '1') then
irq_ctrl_src_load_o <= '1';
else
rddata_reg(31 downto 0) <= irq_ctrl_src_i;
end if;
ack_sreg(0) <= '1';
ack_in_progress <= '1';
when "10" =>
if (wb_we_i = '1') then
irq_ctrl_en_mask_int <= wrdata_reg(31 downto 0);
else
rddata_reg(31 downto 0) <= irq_ctrl_en_mask_int;
end if;
ack_sreg(0) <= '1';
ack_in_progress <= '1';
when others =>
-- prevent the slave from hanging the bus on invalid address
ack_in_progress <= '1';
ack_sreg(0) <= '1';
end case;
end if;
end if;
end if;
end process;
-- Drive the data output bus
wb_data_o <= rddata_reg;
-- Multiple interrupt
irq_ctrl_multi_irq_o <= wrdata_reg(31 downto 0);
-- Interrupt sources
irq_ctrl_src_o <= wrdata_reg(31 downto 0);
-- Interrupt enable mask
irq_ctrl_en_mask_o <= irq_ctrl_en_mask_int;
rwaddr_reg <= wb_addr_i;
-- ACK signal generation. Just pass the LSB of ACK counter.
wb_ack_o <= ack_sreg(0);
end syn;
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
########################################
# This file was generated by hdlmake #
# http://ohwr.org/projects/hdl-make/ #
########################################
PROJECT := spexi_fmc_adc_100Ms.xise
ISE_CRAP := *.b spexi_top_fmc_adc_100Ms_summary.html *.tcl spexi_top_fmc_adc_100Ms.bld spexi_top_fmc_adc_100Ms.cmd_log *.drc spexi_top_fmc_adc_100Ms.lso *.ncd spexi_top_fmc_adc_100Ms.ngc spexi_top_fmc_adc_100Ms.ngd spexi_top_fmc_adc_100Ms.ngr spexi_top_fmc_adc_100Ms.pad spexi_top_fmc_adc_100Ms.par spexi_top_fmc_adc_100Ms.pcf spexi_top_fmc_adc_100Ms.prj spexi_top_fmc_adc_100Ms.ptwx spexi_top_fmc_adc_100Ms.stx spexi_top_fmc_adc_100Ms.syr spexi_top_fmc_adc_100Ms.twr spexi_top_fmc_adc_100Ms.twx spexi_top_fmc_adc_100Ms.gise spexi_top_fmc_adc_100Ms.unroutes spexi_top_fmc_adc_100Ms.ut spexi_top_fmc_adc_100Ms.xpi spexi_top_fmc_adc_100Ms.xst spexi_top_fmc_adc_100Ms_bitgen.xwbt spexi_top_fmc_adc_100Ms_envsettings.html spexi_top_fmc_adc_100Ms_guide.ncd spexi_top_fmc_adc_100Ms_map.map spexi_top_fmc_adc_100Ms_map.mrp spexi_top_fmc_adc_100Ms_map.ncd spexi_top_fmc_adc_100Ms_map.ngm spexi_top_fmc_adc_100Ms_map.xrpt spexi_top_fmc_adc_100Ms_ngdbuild.xrpt spexi_top_fmc_adc_100Ms_pad.csv spexi_top_fmc_adc_100Ms_pad.txt spexi_top_fmc_adc_100Ms_par.xrpt spexi_top_fmc_adc_100Ms_summary.xml spexi_top_fmc_adc_100Ms_usage.xml spexi_top_fmc_adc_100Ms_xst.xrpt usage_statistics_webtalk.html webtalk.log webtalk_pn.xml run.tcl
#target for performing local synthesis
local:
echo "project open $(PROJECT)" > run.tcl
echo "process run {Generate Programming File} -force rerun_all" >> run.tcl
xtclsh run.tcl
#target for cleaing all intermediate stuff
clean:
rm -f $(ISE_CRAP)
rm -rf xst xlnx_auto_*_xdb iseconfig _xmsgs _ngo
#target for cleaning final files
mrproper:
rm -f *.bit *.bin *.mcs
target = "xilinx"
action = "synthesis"
syn_device = "xc6slx150t"
syn_grade = "-3"
syn_package = "fgg900"
syn_top = "spexi_top_fmc_adc_100Ms"
syn_project = "spexi_fmc_adc_100Ms.xise"
files = ["../spexi_v0_1.ucf",
"../../ip_cores/adc_sync_fifo.ngc",
"../../ip_cores/multishot_dpram.ngc",
"../../ip_cores/wb_ddr_fifo.ngc",
"../../ip_cores/adc_serdes.vhd",
"../../ip_cores/monostable/monostable_rtl.vhd",
"../../ip_cores/ext_pulse_sync/ext_pulse_sync_rtl.vhd",
"../../ip_cores/utils/utils_pkg.vhd"]
modules = { "local" : ["../rtl",
"../../adc/rtl",
"../../ip_cores/timetag_core/rtl"],
"git" : ["git://ohwr.org/hdl-core-lib/general-cores.git::proposed_master",
"git://ohwr.org/hdl-core-lib/ddr3-sp6-core.git::spec_bank3_64b_32b",
"git://ohwr.org/hdl-core-lib/gn4124-core.git::master"]}
fetchto="../../ip_cores"
WBGEN2=~/projects/wbgen2/wbgen2
RTL=../rtl/
carrier_csr:
$(WBGEN2) -l vhdl -V $(RTL)$@.vhd -D $@.htm -C $@.h $@.wb
utc_core_regs:
$(WBGEN2) -l vhdl -V $(RTL)$@.vhd -D $@.htm -C $@.h $@.wb
irq_controller_regs:
$(WBGEN2) -l vhdl -V $(RTL)$@.vhd -D $@.htm -C $@.h $@.wb
/*
Register definitions for slave core: Carrier control and status registers
* File : carrier_csr.h
* Author : auto-generated by wbgen2 from carrier_csr.wb
* Created : Wed Nov 23 09:30:44 2011
* Standard : ANSI C
THIS FILE WAS GENERATED BY wbgen2 FROM SOURCE FILE carrier_csr.wb
DO NOT HAND-EDIT UNLESS IT'S ABSOLUTELY NECESSARY!
*/
#ifndef __WBGEN2_REGDEFS_CARRIER_CSR_WB
#define __WBGEN2_REGDEFS_CARRIER_CSR_WB
#include <inttypes.h>
#if defined( __GNUC__)
#define PACKED __attribute__ ((packed))
#else
#error "Unsupported compiler?"
#endif
#ifndef __WBGEN2_MACROS_DEFINED__
#define __WBGEN2_MACROS_DEFINED__
#define WBGEN2_GEN_MASK(offset, size) (((1<<(size))-1) << (offset))
#define WBGEN2_GEN_WRITE(value, offset, size) (((value) & ((1<<(size))-1)) << (offset))
#define WBGEN2_GEN_READ(reg, offset, size) (((reg) >> (offset)) & ((1<<(size))-1))
#define WBGEN2_SIGN_EXTEND(value, bits) (((value) & (1<<bits) ? ~((1<<(bits))-1): 0 ) | (value))
#endif
/* definitions for register: Carrier type and PCB version */
/* definitions for field: PCB revision in reg: Carrier type and PCB version */
#define CARRIER_CSR_CARRIER_PCB_REV_MASK WBGEN2_GEN_MASK(0, 4)
#define CARRIER_CSR_CARRIER_PCB_REV_SHIFT 0
#define CARRIER_CSR_CARRIER_PCB_REV_W(value) WBGEN2_GEN_WRITE(value, 0, 4)
#define CARRIER_CSR_CARRIER_PCB_REV_R(reg) WBGEN2_GEN_READ(reg, 0, 4)
/* definitions for field: Reserved register in reg: Carrier type and PCB version */
#define CARRIER_CSR_CARRIER_RESERVED_MASK WBGEN2_GEN_MASK(4, 12)
#define CARRIER_CSR_CARRIER_RESERVED_SHIFT 4
#define CARRIER_CSR_CARRIER_RESERVED_W(value) WBGEN2_GEN_WRITE(value, 4, 12)
#define CARRIER_CSR_CARRIER_RESERVED_R(reg) WBGEN2_GEN_READ(reg, 4, 12)
/* definitions for field: Carrier type in reg: Carrier type and PCB version */
#define CARRIER_CSR_CARRIER_TYPE_MASK WBGEN2_GEN_MASK(16, 16)
#define CARRIER_CSR_CARRIER_TYPE_SHIFT 16
#define CARRIER_CSR_CARRIER_TYPE_W(value) WBGEN2_GEN_WRITE(value, 16, 16)
#define CARRIER_CSR_CARRIER_TYPE_R(reg) WBGEN2_GEN_READ(reg, 16, 16)
/* definitions for register: Bitstream type */
/* definitions for register: Bitstream date */
/* definitions for register: Status */
/* definitions for field: FMC presence in reg: Status */
#define CARRIER_CSR_STAT_FMC_PRES WBGEN2_GEN_MASK(0, 1)
/* definitions for field: GN4142 core P2L PLL status in reg: Status */
#define CARRIER_CSR_STAT_P2L_PLL_LCK WBGEN2_GEN_MASK(1, 1)
/* definitions for field: System clock PLL status in reg: Status */
#define CARRIER_CSR_STAT_SYS_PLL_LCK WBGEN2_GEN_MASK(2, 1)
/* definitions for field: DDR3 calibration status in reg: Status */
#define CARRIER_CSR_STAT_DDR3_CAL_DONE WBGEN2_GEN_MASK(3, 1)
/* definitions for field: Reserved in reg: Status */
#define CARRIER_CSR_STAT_RESERVED_MASK WBGEN2_GEN_MASK(4, 28)
#define CARRIER_CSR_STAT_RESERVED_SHIFT 4
#define CARRIER_CSR_STAT_RESERVED_W(value) WBGEN2_GEN_WRITE(value, 4, 28)
#define CARRIER_CSR_STAT_RESERVED_R(reg) WBGEN2_GEN_READ(reg, 4, 28)
/* definitions for register: Control */
/* definitions for field: Green LED in reg: Control */
#define CARRIER_CSR_CTRL_LED_GREEN WBGEN2_GEN_MASK(0, 1)
/* definitions for field: Red LED in reg: Control */
#define CARRIER_CSR_CTRL_LED_RED WBGEN2_GEN_MASK(1, 1)
/* definitions for field: DAC clear in reg: Control */
#define CARRIER_CSR_CTRL_DAC_CLR_N WBGEN2_GEN_MASK(2, 1)
/* definitions for field: Reserved in reg: Control */
#define CARRIER_CSR_CTRL_RESERVED_MASK WBGEN2_GEN_MASK(3, 29)
#define CARRIER_CSR_CTRL_RESERVED_SHIFT 3
#define CARRIER_CSR_CTRL_RESERVED_W(value) WBGEN2_GEN_WRITE(value, 3, 29)
#define CARRIER_CSR_CTRL_RESERVED_R(reg) WBGEN2_GEN_READ(reg, 3, 29)
PACKED struct CARRIER_CSR_WB {
/* [0x0]: REG Carrier type and PCB version */
uint32_t CARRIER;
/* [0x4]: REG Bitstream type */
uint32_t BITSTREAM_TYPE;
/* [0x8]: REG Bitstream date */
uint32_t BITSTREAM_DATE;
/* [0xc]: REG Status */
uint32_t STAT;