Fix indentation.

aa0db067 · Tristan Gingold · 4884db02 · aa0db067
Commit aa0db067 authored Sep 04, 2018 by Tristan Gingold
Hide whitespace changes
Inline Side-by-side

Showing with 12 additions and 11 deletions

acam_timecontrol_interface.vhd hdl/rtl/acam_timecontrol_interface.vhd +12 -11

No files found.
--- a/hdl/rtl/acam_timecontrol_interface.vhd
+++ b/hdl/rtl/acam_timecontrol_interface.vhd
@@ -72,7 +72,7 @@ entity acam_timecontrol_interface is
     rst_i                   : in std_logic; -- reset
     acam_refclk_r_edge_p_i  : in std_logic; -- pulse upon ACAM RefClk rising edge

-    -- upc_p from the WRabbit or the local generator 
+    -- upc_p from the WRabbit or the local generator
     utc_p_i                 : in std_logic;

    -- Signals from the data_engine unit
@@ -81,7 +81,7 @@ entity acam_timecontrol_interface is
    -- Signals from the reg_ctrl unit
     activate_acq_p_i        : in std_logic; -- signal from GN4124/VME to start following the ACAM chip
                                             -- for tstamps aquisition
-	 deactivate_acq_p_i      : in std_logic; -- acquisition deactivated
+     deactivate_acq_p_i      : in std_logic; -- acquisition deactivated

    -- Signals from the ACAM chip
     err_flag_i              : in std_logic; -- ACAM error flag, active HIGH; through ACAM config
@@ -93,8 +93,8 @@ entity acam_timecontrol_interface is
    -- Signals to the ACAM chip
     start_from_fpga_o       : out std_logic;

-     stop_dis_o              : out std_logic; 	
-    -- Signals to the 
+     stop_dis_o              : out std_logic;
+    -- Signals to the
     acam_errflag_r_edge_p_o : out std_logic; -- ACAM ErrFlag rising edge
     acam_errflag_f_edge_p_o : out std_logic; -- ACAM ErrFlag falling edge
     acam_intflag_f_edge_p_o : out std_logic);-- ACAM IntFlag falling edge
@@ -118,7 +118,7 @@ begin

 ---------------------------------------------------------------------------------------------------
 --                            IntFlag and ERRflag Input Synchronizers                            --
---------------------------------------------------------------------------------------------------   
+---------------------------------------------------------------------------------------------------

  sync_err_flag : gc_sync_ffs
    port map (
@@ -150,18 +150,19 @@ begin
        start_pulse             <= '0';
        wait_for_state_active   <= '0';
        stop_dis_o              <= '1';
-	  else
+      else
        if activate_acq_p_i = '1' then
          wait_for_utc          <= '1';
          start_pulse           <= '0';
        elsif utc_p_i = '1' and wait_for_utc = '1' then
          wait_for_utc          <= '0';
          start_pulse           <= '1';
-		  wait_for_state_active <= '1';
-		elsif wait_for_state_active = '1' and state_active_p_i = '1' then -- data_engine starts following ACAM EF
-          stop_dis_o            <= '0'; 
-		  wait_for_state_active <= '0';
-		else
+          wait_for_state_active <= '1';
+        elsif wait_for_state_active = '1' and state_active_p_i = '1' then
+          -- data_engine starts following ACAM EF
+          stop_dis_o            <= '0';
+          wait_for_state_active <= '0';
+        else
          start_pulse           <= '0';
        end if;
      end if;