User Guide
Registration
Please note that you only need to register and request membership for a project if you need write access on the wiki and repositories. Read access is universal.
Everything on this site is readable by everyone. You will not be able to access more material by registering.
Also, subscribing to the Discourse forums is independent from OHR membership.
If there really is a project that you need to have write access on (and only then), you have to register. After that you should ask the administrator of the project to give you access rights. If you still think you need to register, please contact Javier.Serrano (insert a "@" here) cern.ch by sending a him or one of the other OHWR administrators your Name, Username and E-mail.
Guidelines
Wiki editing
Redmine uses a language called "textile" for wiki editing.
This page explains the most used commands, as well as several modifications to textile introduced on redmine, such as links to issues and commits:
For a complete textile reference, see the textile reference manual for redcloth (the library used for rendering textile on this page).
If you are familiar with Twiki, you may want to read the twiki-vs-textile page in order to see the differences.
Repositories
The repositories are used to store full hardware design information and source files of firmware and software. Someone who likes to continue a development should be able to check out a Repository and have all needed information. Here are a couple of example policies currently used in OHR projects for handling contributions:
- Policy used for software in the White Rabbit switch
- Policy used in the wrpc-sw, general-cores and wr-cores projects
Git repositories
Much like with the SVN repositories, the Git repositories are available to everyone on read-only mode. There's a difference, though; git repositories have two URLs; one for read-only access and another one for read-write.
If you want to clone a git repository in read-only mode, you have to use a command like the following:
git clone git:https://www.ohwr.org/white-rabbit/wr-switch-sw.git
(Notice that we are using the white-rabbit/wr-switch-sw project for this example. You may get the correct url from your project's repository page)
The only requisite for cloning a repository this way is that you have git installed and configured on your machine.
Read/write access has more requirements.
- The owner of the project you want to push changes to must have granted you committer rights.
- You must have installed SSH on your machine, and have generated at least one public key / private key pair.
- You must have uploaded at least one public key to your settings.
You may browse the Git-Client-Setup page for instructions about how to install & configure Git.
Once the previous requirements are met, you will be able to clone the repository by executing a command similar to this one:
git clone git@ohwr.org:white-rabbit/wr-switch-sw.git
Notice that the syntax is slighly different from the read-only version, and that we are again using white-rabbit/wr-switch-sw as an example.
Other info
10 January 2022