Skip to content

P
PPSi
Commit f7f7cd7b authored by Alessandro Rubini's avatar Alessandro Rubini
Browse files
Options

trivial: removed leftover pdelay parameters 

While some parameters are still there, for future use when we'll put
back the pdelay mechanism, the default mechanism is clearly not
pdelay, and incorrectly-used parameters are abetter removed.
Signed-off-by: Alessandro Rubini's avatarAlessandro Rubini <rubini@gnudd.com>
parent 5c81a1b8
Hide whitespace changes
Inline Side-by-side
Showing with 0 additions and 5 deletions
include/ppsi/constants.h
View file @ f7f7cd7b
......@@ -16,14 +16,12 @@
#define PP_DEFAULT_ETHERNET_MODE 0
#define PP_DEFAULT_GPTP_MODE 0
#define PP_DEFAULT_DOMAIN_NUMBER 0
#define PP_DEFAULT_DELAY_MECHANISM P2P
#define PP_DEFAULT_AP 10
#define PP_DEFAULT_AI 120
#define PP_DEFAULT_DELAY_S 6
#define PP_DEFAULT_ANNOUNCE_INTERVAL 1 /* 0 in 802.1AS, 3 is ok */
#define PP_DEFAULT_UTC_OFFSET 0
#define PP_DEFAULT_UTC_VALID 0
#define PP_DEFAULT_PDELAYREQ_INTERVAL 1 /* -4 in 802.1AS */
#define PP_DEFAULT_DELAYREQ_INTERVAL 0 /* 3 is ok */
#define PP_DEFAULT_SYNC_INTERVAL 0 /* -7 in 802.1AS, 1 is ok */
#define PP_DEFAULT_SYNC_RECEIPT_TIMEOUT 3
......
include/ppsi/ieee1588_types.h
View file @ f7f7cd7b
......@@ -261,7 +261,6 @@ typedef struct DSPort { /* page 72 */
UInteger8 announceReceiptTimeout;
Integer8 logSyncInterval;
Enumeration8 delayMechanism;
Integer8 logMinPdelayReqInterval; /* note: never changed */
UInteger4 versionNumber;
void *ext_dsport;
......
proto-standard/state-initializing.c
View file @ f7f7cd7b
......@@ -64,8 +64,6 @@ int pp_initializing(struct pp_instance *ppi, unsigned char *pkt, int plen)
port->logAnnounceInterval = opt->announce_intvl;
port->announceReceiptTimeout = PP_DEFAULT_ANNOUNCE_RECEIPT_TIMEOUT;
port->logSyncInterval = opt->sync_intvl;
port->delayMechanism = PP_DEFAULT_DELAY_MECHANISM;
port->logMinPdelayReqInterval = PP_DEFAULT_PDELAYREQ_INTERVAL;
port->versionNumber = PP_VERSION_PTP;
if (pp_hooks.init)
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment