clean the superfluous Xilinx cores in Yarr coregen module

parent dfe497c6
files = ["clk_gen.vhd",
"ila.ngc",
"ila_icon.ngc",
"fifo_64x512.ngc",
"fifo_32x512.ngc",
"l2p_fifo.ngc",
"rx_bridge_fifo.ngc",
"rx_channel_fifo.ngc",
"rx_bridge_ctrl_fifo.ngc",
"ila.vhd",
"ila_icon.vhd",
"fifo_64x512.vhd",
"fifo_32x512.vhd",
"l2p_fifo.vhd",
"rx_bridge_fifo.vhd",
"rx_channel_fifo.vhd",
"rx_bridge_ctrl_fifo.vhd"]
......
SET busformat = BusFormatAngleBracketNotRipped
SET designentry = VHDL
SET device = xc6slx45t
SET devicefamily = spartan6
SET flowvendor = Other
SET package = fgg484
SET speedgrade = -3
SET verilogsim = false
SET vhdlsim = true
##############################################################
#
# Xilinx Core Generator version 13.3
# Date: Wed Jul 11 09:32:59 2012
#
##############################################################
#
# This file contains the customisation parameters for a
# Xilinx CORE Generator IP GUI. It is strongly recommended
# that you do not manually alter this file as it may cause
# unexpected and unsupported behavior.
#
##############################################################
#
# Generated from component: xilinx.com:ip:mig:3.9
#
##############################################################
#
# BEGIN Project Options
SET addpads = false
SET asysymbol = true
SET busformat = BusFormatAngleBracketNotRipped
SET createndf = false
SET designentry = VHDL
SET device = xc6slx45t
SET devicefamily = spartan6
SET flowvendor = Other
SET formalverification = false
SET foundationsym = false
SET implementationfiletype = Ngc
SET package = fgg484
SET removerpms = false
SET simulationfiles = Behavioral
SET speedgrade = -3
SET verilogsim = false
SET vhdlsim = true
# END Project Options
# BEGIN Select
SELECT MIG_Virtex-6_and_Spartan-6 family Xilinx,_Inc. 3.9
# END Select
# BEGIN Parameters
CSET component_name=ddr3_ctrl_spec_bank3_32b_32b
CSET xml_input_file=./ddr3_ctrl_spec_bank3_32b_32b/user_design/mig.prj
# END Parameters
GENERATE
# CRC: 8651ae82
##############################################################
#
# Xilinx Core Generator version 13.3
# Date: Wed Jul 11 09:34:06 2012
#
##############################################################
#
# This file contains the customisation parameters for a
# Xilinx CORE Generator IP GUI. It is strongly recommended
# that you do not manually alter this file as it may cause
# unexpected and unsupported behavior.
#
##############################################################
#
# Generated from component: xilinx.com:ip:mig:3.9
#
##############################################################
#
# BEGIN Project Options
SET addpads = false
SET asysymbol = true
SET busformat = BusFormatAngleBracketNotRipped
SET createndf = false
SET designentry = VHDL
SET device = xc6slx45t
SET devicefamily = spartan6
SET flowvendor = Other
SET formalverification = false
SET foundationsym = false
SET implementationfiletype = Ngc
SET package = fgg484
SET removerpms = false
SET simulationfiles = Behavioral
SET speedgrade = -3
SET verilogsim = false
SET vhdlsim = true
# END Project Options
# BEGIN Select
SELECT MIG_Virtex-6_and_Spartan-6 family Xilinx,_Inc. 3.9
# END Select
# BEGIN Parameters
CSET component_name=ddr3_ctrl_spec_bank3_64b_32b
CSET xml_input_file=./ddr3_ctrl_spec_bank3_64b_32b/user_design/mig.prj
# END Parameters
GENERATE
# CRC: 38a6663a
This source diff could not be displayed because it is too large. You can view the blob instead.
--------------------------------------------------------------------------------
-- (c) Copyright 1995 - 2010 Xilinx, Inc. All rights reserved. --
-- --
-- This file contains confidential and proprietary information --
-- of Xilinx, Inc. and is protected under U.S. and --
-- international copyright and other intellectual property --
-- laws. --
-- --
-- DISCLAIMER --
-- This disclaimer is not a license and does not grant any --
-- rights to the materials distributed herewith. Except as --
-- otherwise provided in a valid license issued to you by --
-- Xilinx, and to the maximum extent permitted by applicable --
-- law: (1) THESE MATERIALS ARE MADE AVAILABLE "AS IS" AND --
-- WITH ALL FAULTS, AND XILINX HEREBY DISCLAIMS ALL WARRANTIES --
-- AND CONDITIONS, EXPRESS, IMPLIED, OR STATUTORY, INCLUDING --
-- BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY, NON- --
-- INFRINGEMENT, OR FITNESS FOR ANY PARTICULAR PURPOSE; and --
-- (2) Xilinx shall not be liable (whether in contract or tort, --
-- including negligence, or under any other theory of --
-- liability) for any loss or damage of any kind or nature --
-- related to, arising under or in connection with these --
-- materials, including for any direct, or any indirect, --
-- special, incidental, or consequential loss or damage --
-- (including loss of data, profits, goodwill, or any type of --
-- loss or damage suffered as a result of any action brought --
-- by a third party) even if such damage or loss was --
-- reasonably foreseeable or Xilinx had been advised of the --
-- possibility of the same. --
-- --
-- CRITICAL APPLICATIONS --
-- Xilinx products are not designed or intended to be fail- --
-- safe, or for use in any application requiring fail-safe --
-- performance, such as life-support or safety devices or --
-- systems, Class III medical devices, nuclear facilities, --
-- applications related to the deployment of airbags, or any --
-- other applications that could lead to death, personal --
-- injury, or severe property or environmental damage --
-- (individually and collectively, "Critical --
-- Applications"). Customer assumes the sole risk and --
-- liability of any use of Xilinx products in Critical --
-- Applications, subject only to applicable laws and --
-- regulations governing limitations on product liability. --
-- --
-- THIS COPYRIGHT NOTICE AND DISCLAIMER MUST BE RETAINED AS --
-- PART OF THIS FILE AT ALL TIMES. --
--------------------------------------------------------------------------------
-- Generated from component ID: xilinx.com:ip:fifo_generator:6.2
-- You must compile the wrapper file fifo_32x512.vhd when simulating
-- the core, fifo_32x512. When compiling the wrapper file, be sure to
-- reference the XilinxCoreLib VHDL simulation library. For detailed
-- instructions, please refer to the "CORE Generator Help".
-- The synthesis directives "translate_off/translate_on" specified
-- below are supported by Xilinx, Mentor Graphics and Synplicity
-- synthesis tools. Ensure they are correct for your synthesis tool(s).
LIBRARY ieee;
USE ieee.std_logic_1164.ALL;
-- synthesis translate_off
Library XilinxCoreLib;
-- synthesis translate_on
ENTITY fifo_32x512 IS
port (
rst: in std_logic;
wr_clk: in std_logic;
rd_clk: in std_logic;
din: in std_logic_vector(31 downto 0);
wr_en: in std_logic;
rd_en: in std_logic;
prog_full_thresh_assert: in std_logic_vector(9 downto 0);
prog_full_thresh_negate: in std_logic_vector(9 downto 0);
dout: out std_logic_vector(31 downto 0);
full: out std_logic;
empty: out std_logic;
valid: out std_logic;
prog_full: out std_logic);
END fifo_32x512;
ARCHITECTURE fifo_32x512_a OF fifo_32x512 IS
-- synthesis translate_off
component wrapped_fifo_32x512
port (
rst: in std_logic;
wr_clk: in std_logic;
rd_clk: in std_logic;
din: in std_logic_vector(31 downto 0);
wr_en: in std_logic;
rd_en: in std_logic;
prog_full_thresh_assert: in std_logic_vector(9 downto 0);
prog_full_thresh_negate: in std_logic_vector(9 downto 0);
dout: out std_logic_vector(31 downto 0);
full: out std_logic;
empty: out std_logic;
valid: out std_logic;
prog_full: out std_logic);
end component;
-- Configuration specification
for all : wrapped_fifo_32x512 use entity XilinxCoreLib.fifo_generator_v6_2(behavioral)
generic map(
c_has_int_clk => 0,
c_wr_response_latency => 1,
c_rd_freq => 1,
c_has_srst => 0,
c_enable_rst_sync => 1,
c_has_rd_data_count => 0,
c_din_width => 32,
c_has_wr_data_count => 0,
c_full_flags_rst_val => 1,
c_implementation_type => 2,
c_family => "spartan6",
c_use_embedded_reg => 0,
c_has_wr_rst => 0,
c_wr_freq => 1,
c_use_dout_rst => 1,
c_underflow_low => 0,
c_has_meminit_file => 0,
c_has_overflow => 0,
c_preload_latency => 1,
c_dout_width => 32,
c_msgon_val => 1,
c_rd_depth => 1024,
c_default_value => "BlankString",
c_mif_file_name => "BlankString",
c_error_injection_type => 0,
c_has_underflow => 0,
c_has_rd_rst => 0,
c_has_almost_full => 0,
c_has_rst => 1,
c_data_count_width => 10,
c_has_wr_ack => 0,
c_use_ecc => 0,
c_wr_ack_low => 0,
c_common_clock => 0,
c_rd_pntr_width => 10,
c_use_fwft_data_count => 0,
c_has_almost_empty => 0,
c_rd_data_count_width => 10,
c_enable_rlocs => 0,
c_wr_pntr_width => 10,
c_overflow_low => 0,
c_prog_empty_type => 0,
c_optimization_mode => 0,
c_wr_data_count_width => 10,
c_preload_regs => 0,
c_dout_rst_val => "0",
c_has_data_count => 0,
c_prog_full_thresh_negate_val => 1020,
c_wr_depth => 1024,
c_prog_empty_thresh_negate_val => 3,
c_prog_empty_thresh_assert_val => 2,
c_has_valid => 1,
c_init_wr_pntr_val => 0,
c_prog_full_thresh_assert_val => 1021,
c_use_fifo16_flags => 0,
c_has_backup => 0,
c_valid_low => 0,
c_prim_fifo_type => "1kx36",
c_count_type => 0,
c_prog_full_type => 4,
c_memory_type => 1);
-- synthesis translate_on
BEGIN
-- synthesis translate_off
U0 : wrapped_fifo_32x512
port map (
rst => rst,
wr_clk => wr_clk,
rd_clk => rd_clk,
din => din,
wr_en => wr_en,
rd_en => rd_en,
prog_full_thresh_assert => prog_full_thresh_assert,
prog_full_thresh_negate => prog_full_thresh_negate,
dout => dout,
full => full,
empty => empty,
valid => valid,
prog_full => prog_full);
-- synthesis translate_on
END fifo_32x512_a;
##############################################################
#
# Xilinx Core Generator version 14.4
# Date: Mon Jun 16 08:46:40 2014
#
##############################################################
#
# This file contains the customisation parameters for a
# Xilinx CORE Generator IP GUI. It is strongly recommended
# that you do not manually alter this file as it may cause
# unexpected and unsupported behavior.
#
##############################################################
#
# Generated from component: xilinx.com:ip:fifo_generator:6.2
#
##############################################################
#
# BEGIN Project Options
SET addpads = false
SET asysymbol = true
SET busformat = BusFormatAngleBracketNotRipped
SET createndf = false
SET designentry = VHDL
SET device = xc6slx45t
SET devicefamily = spartan6
SET flowvendor = Foundation_ISE
SET formalverification = false
SET foundationsym = false
SET implementationfiletype = Ngc
SET package = fgg484
SET removerpms = false
SET simulationfiles = Behavioral
SET speedgrade = -3
SET verilogsim = false
SET vhdlsim = true
# END Project Options
# BEGIN Select
SELECT Fifo_Generator family Xilinx,_Inc. 6.2
# END Select
# BEGIN Parameters
CSET almost_empty_flag=false
CSET almost_full_flag=false
CSET component_name=fifo_32x512
CSET data_count=false
CSET data_count_width=10
CSET disable_timing_violations=false
CSET dout_reset_value=0
CSET empty_threshold_assert_value=2
CSET empty_threshold_negate_value=3
CSET enable_ecc=false
CSET enable_int_clk=false
CSET enable_reset_synchronization=true
CSET fifo_implementation=Independent_Clocks_Block_RAM
CSET full_flags_reset_value=1
CSET full_threshold_assert_value=1021
CSET full_threshold_negate_value=1020
CSET inject_dbit_error=false
CSET inject_sbit_error=false
CSET input_data_width=32
CSET input_depth=1024
CSET output_data_width=32
CSET output_depth=1024
CSET overflow_flag=false
CSET overflow_sense=Active_High
CSET performance_options=Standard_FIFO
CSET programmable_empty_type=No_Programmable_Empty_Threshold
CSET programmable_full_type=Multiple_Programmable_Full_Threshold_Input_Ports
CSET read_clock_frequency=1
CSET read_data_count=false
CSET read_data_count_width=10
CSET reset_pin=true
CSET reset_type=Asynchronous_Reset
CSET underflow_flag=false
CSET underflow_sense=Active_High
CSET use_dout_reset=true
CSET use_embedded_registers=false
CSET use_extra_logic=false
CSET valid_flag=true
CSET valid_sense=Active_High
CSET write_acknowledge_flag=false
CSET write_acknowledge_sense=Active_High
CSET write_clock_frequency=1
CSET write_data_count=false
CSET write_data_count_width=10
# END Parameters
# BEGIN Extra information
MISC pkg_timestamp=2012-12-18T05:23:34Z
# END Extra information
GENERATE
# CRC: d005af87
This source diff could not be displayed because it is too large. You can view the blob instead.
--------------------------------------------------------------------------------
-- (c) Copyright 1995 - 2010 Xilinx, Inc. All rights reserved. --
-- --
-- This file contains confidential and proprietary information --
-- of Xilinx, Inc. and is protected under U.S. and --
-- international copyright and other intellectual property --
-- laws. --
-- --
-- DISCLAIMER --
-- This disclaimer is not a license and does not grant any --
-- rights to the materials distributed herewith. Except as --
-- otherwise provided in a valid license issued to you by --
-- Xilinx, and to the maximum extent permitted by applicable --
-- law: (1) THESE MATERIALS ARE MADE AVAILABLE "AS IS" AND --
-- WITH ALL FAULTS, AND XILINX HEREBY DISCLAIMS ALL WARRANTIES --
-- AND CONDITIONS, EXPRESS, IMPLIED, OR STATUTORY, INCLUDING --
-- BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY, NON- --
-- INFRINGEMENT, OR FITNESS FOR ANY PARTICULAR PURPOSE; and --
-- (2) Xilinx shall not be liable (whether in contract or tort, --
-- including negligence, or under any other theory of --
-- liability) for any loss or damage of any kind or nature --
-- related to, arising under or in connection with these --
-- materials, including for any direct, or any indirect, --
-- special, incidental, or consequential loss or damage --
-- (including loss of data, profits, goodwill, or any type of --
-- loss or damage suffered as a result of any action brought --
-- by a third party) even if such damage or loss was --
-- reasonably foreseeable or Xilinx had been advised of the --
-- possibility of the same. --
-- --
-- CRITICAL APPLICATIONS --
-- Xilinx products are not designed or intended to be fail- --
-- safe, or for use in any application requiring fail-safe --
-- performance, such as life-support or safety devices or --
-- systems, Class III medical devices, nuclear facilities, --
-- applications related to the deployment of airbags, or any --
-- other applications that could lead to death, personal --
-- injury, or severe property or environmental damage --
-- (individually and collectively, "Critical --
-- Applications"). Customer assumes the sole risk and --
-- liability of any use of Xilinx products in Critical --
-- Applications, subject only to applicable laws and --
-- regulations governing limitations on product liability. --
-- --
-- THIS COPYRIGHT NOTICE AND DISCLAIMER MUST BE RETAINED AS --
-- PART OF THIS FILE AT ALL TIMES. --
--------------------------------------------------------------------------------
-- Generated from component ID: xilinx.com:ip:fifo_generator:6.2
-- You must compile the wrapper file fifo_64x512.vhd when simulating
-- the core, fifo_64x512. When compiling the wrapper file, be sure to
-- reference the XilinxCoreLib VHDL simulation library. For detailed
-- instructions, please refer to the "CORE Generator Help".
-- The synthesis directives "translate_off/translate_on" specified
-- below are supported by Xilinx, Mentor Graphics and Synplicity
-- synthesis tools. Ensure they are correct for your synthesis tool(s).
LIBRARY ieee;
USE ieee.std_logic_1164.ALL;
-- synthesis translate_off
Library XilinxCoreLib;
-- synthesis translate_on
ENTITY fifo_64x512 IS
port (
rst: in std_logic;
wr_clk: in std_logic;
rd_clk: in std_logic;
din: in std_logic_vector(63 downto 0);
wr_en: in std_logic;
rd_en: in std_logic;
prog_full_thresh_assert: in std_logic_vector(8 downto 0);
prog_full_thresh_negate: in std_logic_vector(8 downto 0);
dout: out std_logic_vector(63 downto 0);
full: out std_logic;
empty: out std_logic;
valid: out std_logic;
prog_full: out std_logic);
END fifo_64x512;
ARCHITECTURE fifo_64x512_a OF fifo_64x512 IS
-- synthesis translate_off
component wrapped_fifo_64x512
port (
rst: in std_logic;
wr_clk: in std_logic;
rd_clk: in std_logic;
din: in std_logic_vector(63 downto 0);
wr_en: in std_logic;
rd_en: in std_logic;
prog_full_thresh_assert: in std_logic_vector(8 downto 0);
prog_full_thresh_negate: in std_logic_vector(8 downto 0);
dout: out std_logic_vector(63 downto 0);
full: out std_logic;
empty: out std_logic;
valid: out std_logic;
prog_full: out std_logic);
end component;
-- Configuration specification
for all : wrapped_fifo_64x512 use entity XilinxCoreLib.fifo_generator_v6_2(behavioral)
generic map(
c_has_int_clk => 0,
c_wr_response_latency => 1,
c_rd_freq => 1,
c_has_srst => 0,
c_enable_rst_sync => 1,
c_has_rd_data_count => 0,
c_din_width => 64,
c_has_wr_data_count => 0,
c_full_flags_rst_val => 1,
c_implementation_type => 2,
c_family => "spartan6",
c_use_embedded_reg => 0,
c_has_wr_rst => 0,
c_wr_freq => 1,
c_use_dout_rst => 1,
c_underflow_low => 0,
c_has_meminit_file => 0,
c_has_overflow => 0,
c_preload_latency => 1,
c_dout_width => 64,
c_msgon_val => 1,
c_rd_depth => 512,
c_default_value => "BlankString",
c_mif_file_name => "BlankString",
c_error_injection_type => 0,
c_has_underflow => 0,
c_has_rd_rst => 0,
c_has_almost_full => 0,
c_has_rst => 1,
c_data_count_width => 9,
c_has_wr_ack => 0,
c_use_ecc => 0,
c_wr_ack_low => 0,
c_common_clock => 0,
c_rd_pntr_width => 9,
c_use_fwft_data_count => 0,
c_has_almost_empty => 0,
c_rd_data_count_width => 9,
c_enable_rlocs => 0,
c_wr_pntr_width => 9,
c_overflow_low => 0,
c_prog_empty_type => 0,
c_optimization_mode => 0,
c_wr_data_count_width => 9,
c_preload_regs => 0,
c_dout_rst_val => "0",
c_has_data_count => 0,
c_prog_full_thresh_negate_val => 508,
c_wr_depth => 512,
c_prog_empty_thresh_negate_val => 3,
c_prog_empty_thresh_assert_val => 2,
c_has_valid => 1,
c_init_wr_pntr_val => 0,
c_prog_full_thresh_assert_val => 509,
c_use_fifo16_flags => 0,
c_has_backup => 0,
c_valid_low => 0,
c_prim_fifo_type => "512x72",
c_count_type => 0,
c_prog_full_type => 4,
c_memory_type => 1);
-- synthesis translate_on
BEGIN
-- synthesis translate_off
U0 : wrapped_fifo_64x512
port map (
rst => rst,
wr_clk => wr_clk,
rd_clk => rd_clk,
din => din,
wr_en => wr_en,
rd_en => rd_en,
prog_full_thresh_assert => prog_full_thresh_assert,
prog_full_thresh_negate => prog_full_thresh_negate,
dout => dout,
full => full,
empty => empty,
valid => valid,
prog_full => prog_full);
-- synthesis translate_on
END fifo_64x512_a;
##############################################################
#
# Xilinx Core Generator version 14.4
# Date: Mon Jun 16 08:47:45 2014
#
##############################################################
#
# This file contains the customisation parameters for a
# Xilinx CORE Generator IP GUI. It is strongly recommended
# that you do not manually alter this file as it may cause
# unexpected and unsupported behavior.
#
##############################################################
#
# Generated from component: xilinx.com:ip:fifo_generator:6.2
#
##############################################################
#
# BEGIN Project Options
SET addpads = false
SET asysymbol = true
SET busformat = BusFormatAngleBracketNotRipped
SET createndf = false
SET designentry = VHDL
SET device = xc6slx45t
SET devicefamily = spartan6
SET flowvendor = Foundation_ISE
SET formalverification = false
SET foundationsym = false
SET implementationfiletype = Ngc
SET package = fgg484
SET removerpms = false
SET simulationfiles = Behavioral
SET speedgrade = -3
SET verilogsim = false
SET vhdlsim = true
# END Project Options
# BEGIN Select
SELECT Fifo_Generator family Xilinx,_Inc. 6.2
# END Select
# BEGIN Parameters
CSET almost_empty_flag=false
CSET almost_full_flag=false
CSET component_name=fifo_64x512
CSET data_count=false
CSET data_count_width=9
CSET disable_timing_violations=false
CSET dout_reset_value=0
CSET empty_threshold_assert_value=2
CSET empty_threshold_negate_value=3
CSET enable_ecc=false
CSET enable_int_clk=false
CSET enable_reset_synchronization=true
CSET fifo_implementation=Independent_Clocks_Block_RAM
CSET full_flags_reset_value=1
CSET full_threshold_assert_value=509
CSET full_threshold_negate_value=508
CSET inject_dbit_error=false
CSET inject_sbit_error=false
CSET input_data_width=64
CSET input_depth=512
CSET output_data_width=64
CSET output_depth=512
CSET overflow_flag=false
CSET overflow_sense=Active_High
CSET performance_options=Standard_FIFO
CSET programmable_empty_type=No_Programmable_Empty_Threshold
CSET programmable_full_type=Multiple_Programmable_Full_Threshold_Input_Ports
CSET read_clock_frequency=1
CSET read_data_count=false
CSET read_data_count_width=9
CSET reset_pin=true
CSET reset_type=Asynchronous_Reset
CSET underflow_flag=false
CSET underflow_sense=Active_High
CSET use_dout_reset=true
CSET use_embedded_registers=false
CSET use_extra_logic=false
CSET valid_flag=true
CSET valid_sense=Active_High
CSET write_acknowledge_flag=false
CSET write_acknowledge_sense=Active_High
CSET write_clock_frequency=1
CSET write_data_count=false
CSET write_data_count_width=9
# END Parameters
# BEGIN Extra information
MISC pkg_timestamp=2012-12-18T05:23:34Z
# END Extra information
GENERATE
# CRC: b6838683
This diff is collapsed.
-------------------------------------------------------------------------------
-- Copyright (c) 2014 Xilinx, Inc.
-- All Rights Reserved
-------------------------------------------------------------------------------
-- ____ ____
-- / /\/ /
-- /___/ \ / Vendor : Xilinx
-- \ \ \/ Version : 14.4
-- \ \ Application: XILINX CORE Generator
-- / / Filename : ila.vhd
-- /___/ /\ Timestamp : Mon Sep 01 16:46:41 CEST 2014
-- \ \ / \
-- \___\/\___\
--
-- Design Name: VHDL Synthesis Wrapper
-------------------------------------------------------------------------------
-- This wrapper is used to integrate with Project Navigator and PlanAhead
LIBRARY ieee;
USE ieee.std_logic_1164.ALL;
ENTITY ila IS
port (
CONTROL: inout std_logic_vector(35 downto 0);
CLK: in std_logic;
TRIG0: in std_logic_vector(31 downto 0);
TRIG1: in std_logic_vector(31 downto 0);
TRIG2: in std_logic_vector(31 downto 0));
END ila;
ARCHITECTURE ila_a OF ila IS
BEGIN
END ila_a;
##############################################################
#
# Xilinx Core Generator version 14.4
# Date: Mon Sep 1 14:45:12 2014
#
##############################################################
#
# This file contains the customisation parameters for a
# Xilinx CORE Generator IP GUI. It is strongly recommended
# that you do not manually alter this file as it may cause
# unexpected and unsupported behavior.