Skip to content

S
Simple PCIe FMC carrier SPEC - Software
Commit 0c46219d authored by Alessandro Rubini's avatar Alessandro Rubini
Browse files
Options

Merge branch 'tom_speclib' into for-linux-2.6.32

parents cd7e94e2 a7e4be1e
Hide whitespace changes
Inline Side-by-side
Showing with 692 additions and 128 deletions
kernel/loader-ll.c
View file @ 0c46219d
......@@ -6,8 +6,13 @@
#define __LOADER_LL_C__ /* Callers won't define this symbol */
#ifdef __KERNEL__
#include "spec.h"
#include "loader-ll.h"
#else
#include "loader-userspace.h"
#endif
/* These must be set to choose the FPGA configuration mode */
#define GPIO_BOOTSEL0 15
......
tools/Makefile
View file @ 0c46219d
......@@ -3,9 +3,9 @@ CFLAGS = -ggdb -Wall
LDFLAGS = -L. -lspec
LIB = libspec.a
LIBOBJ = speclib.o
LIBOBJ = speclib.o loader-ll.o
PROGS = specmem spec-cl
PROGS = spec-cl spec-fwloader spec-vuart # specmem
all: $(LIB) $(PROGS)
......@@ -15,6 +15,8 @@ $(PROGS): $(LIB)
$(LIB): $(LIBOBJ)
ar r $@ $^
loader-ll.o: ../kernel/loader-ll.c
${CC} -c $^ -I .
clean:
rm -f *.o $(LIB) $(PROGS) *~
\ No newline at end of file
tools/loader-userspace.h 0 → 100644
View file @ 0c46219d
/*
* This header differentiates between kernel-mode and user-mode compilation,
* as loader-ll.c is meant to be used in both contexts.
*/
#ifndef __iomem
#define __iomem /* nothing, for user space */
#endif
extern int loader_low_level(
int fd, /* This is ignored in kernel space */
void __iomem *bar4, /* This is ignored in user space */
const void *data,
int size8);
/* Registers from the gennum header files */
enum {
GNGPIO_BASE = 0xA00,
GNGPIO_DIRECTION_MODE = GNGPIO_BASE + 0x4,
GNGPIO_OUTPUT_ENABLE = GNGPIO_BASE + 0x8,
GNGPIO_OUTPUT_VALUE = GNGPIO_BASE + 0xC,
GNGPIO_INPUT_VALUE = GNGPIO_BASE + 0x10,
FCL_BASE = 0xB00,
FCL_CTRL = FCL_BASE,
FCL_STATUS = FCL_BASE + 0x4,
FCL_IODATA_IN = FCL_BASE + 0x8,
FCL_IODATA_OUT = FCL_BASE + 0xC,
FCL_EN = FCL_BASE + 0x10,
FCL_TIMER_0 = FCL_BASE + 0x14,
FCL_TIMER_1 = FCL_BASE + 0x18,
FCL_CLK_DIV = FCL_BASE + 0x1C,
FCL_IRQ = FCL_BASE + 0x20,
FCL_TIMER_CTRL = FCL_BASE + 0x24,
FCL_IM = FCL_BASE + 0x28,
FCL_TIMER2_0 = FCL_BASE + 0x2C,
FCL_TIMER2_1 = FCL_BASE + 0x30,
FCL_DBG_STS = FCL_BASE + 0x34,
FCL_FIFO = 0xE00,
PCI_SYS_CFG_SYSTEM = 0x800
};
/* The following part implements a different access rule for user and kernel */
#include <stdio.h>
#include <stdint.h>
#include <sys/ioctl.h>
#include <errno.h>
static inline void lll_write(int fd, void __iomem *bar4, uint32_t val, int reg)
{
*(volatile uint32_t *)(bar4+reg) = val;
}
static inline uint32_t lll_read(int fd, void __iomem *bar4, int reg)
{
return *(volatile uint32_t *)(bar4 + reg);
}
#define KERN_ERR /* nothing */
#define printk(format, ...) fprintf (stderr, format, ## __VA_ARGS__)
tools/spec-cl.c
View file @ 0c46219d
......@@ -7,114 +7,58 @@
#include <stdio.h>
#include <stdint.h>
#include <stdlib.h>
#include <unistd.h>
#include <string.h>
#include <errno.h>
#include <fcntl.h>
#include <arpa/inet.h>
#include <sys/mman.h>
#include <sys/stat.h>
#include <sys/types.h>
#include <getopt.h>
#include "spec-tools.h"
#include "speclib.h"
int main(int argc, char **argv)
{
int i, fd;
FILE *f;
uint32_t base;
struct stat stbuf;
void *map_base;
unsigned char *buf;
unsigned int *ibuf;
volatile uint32_t *p;
int bus = -1, dev_fn = -1, c;
uint32_t lm32_base = 0x80000;
void *card;
if (argc != 2) {
fprintf(stderr,
"Use: \"%s <program>\"\n", argv[0]);
exit(1);
}
if((fd = open("/dev/mem", O_RDWR | O_SYNC)) < 0) {
fprintf(stderr, "%s: open(/dev/mem): %s\n", argv[0],
strerror(errno));
exit(1);
}
base = spec_get_base(BASE_BAR0);
if (base == (typeof(base))-1) {
fprintf(stderr, "%s: spec_get_base(): %s\n", argv[0],
strerror(errno));
exit(1);
}
map_base = mmap(0, 1024 * 1024, /* gennum's bar 0 is 1M */
PROT_READ | PROT_WRITE, MAP_SHARED, fd, base);
if(map_base == (void *) -1) {
fprintf(stderr, "%s: mmap(/dev/mem): %s\n", argv[0],
strerror(errno));
exit(1);
while ((c = getopt (argc, argv, "b:d:c:")) != -1)
{
switch(c)
{
case 'b':
sscanf(optarg, "%i", &bus);
break;
case 'd':
sscanf(optarg, "%i", &dev_fn);
break;
case 'c':
sscanf(optarg, "%i", &lm32_base);
break;
default:
fprintf(stderr,
"Use: \"%s [-b bus] [-d devfn] [-c lm32 base address] <lm32_program.bin>\"\n", argv[0]);
fprintf(stderr,
"By default, the first available SPEC is used and the LM32 is assumed at 0x%x.\n", lm32_base);
exit(1);
}
}
close(fd);
f = fopen(argv[1], "r");
if (!f) {
fprintf(stderr, "%s: %s: %s\n", argv[0], argv[1],
strerror(errno));
exit(1);
}
if (fstat(fileno(f), &stbuf)) {
fprintf(stderr, "%s: stat(%s): %s\n", argv[0], argv[1],
strerror(errno));
exit(1);
}
if (!S_ISREG(stbuf.st_mode)) {
fprintf(stderr, "%s: %s: Not a regular file\n", argv[0],
argv[1]);
exit(1);
}
buf = malloc(stbuf.st_size);
if (!buf) {
fprintf(stderr, "%s: Can't allocate buffer (%li bytes): %s\n",
argv[0], (long)stbuf.st_size, strerror(errno));
exit(1);
}
i = fread(buf, 1, stbuf.st_size, f);
if (i < 0) {
fprintf(stderr, "%s: read(%s): %s\n", argv[0], argv[1],
strerror(errno));
exit(1);
}
if (i != stbuf.st_size) {
fprintf(stderr, "%s: short read from %s\n", argv[0], argv[1]);
if (optind >= argc) {
fprintf(stderr, "Expected binary name after options.\n");
exit(1);
}
ibuf = (void *)buf;
/* Phew... we are there, finally */
*(volatile uint32_t *)(map_base + 0xA0400) = 0x1deadbee;
while ( !((*(volatile uint32_t *)(map_base + 0xA0400)) & (1<<28)) )
;
p = map_base + 0x80000;
for (i = 0; i < (stbuf.st_size + 3) / 4; i++) {
p[i] = htonl(ibuf[i]); /* big endian */
sync();
card = spec_open(bus, dev_fn);
if(!card)
{
fprintf(stderr, "Can't detect a SPEC card under the given adress. Make sure a SPEC card is present in your PC and the driver is loaded.\n");
exit(1);
}
for (i = 0; i < (stbuf.st_size + 3) / 4; i++) {
if (p[i] != htonl(ibuf[i]))
fprintf(stderr, "programming error at %x "
"(expected %08x, found %08x)\n", i*4,
htonl(ibuf[i]), p[i]);
if(spec_load_lm32(card, argv[optind], lm32_base) < 0)
{
fprintf(stderr, "Loader failure.\n");
exit(1);
}
*(volatile uint32_t *)(map_base + 0xA0400) = 0x0deadbee;
if (getenv("VERBOSE"))
printf("%s: Wrote %li bytes at offset 0x8000\n", argv[0],
(long)stbuf.st_size);
spec_close(card);
exit (0);
}
tools/spec-fwloader.c 0 → 100644
View file @ 0c46219d
/*
* A tool to program the FPGA within the SPEC.
*
* Alessandro Rubini 2012 for CERN, GPLv2 or later.
*/
#include <stdio.h>
#include <stdint.h>
#include <stdlib.h>
#include <getopt.h>
#include "speclib.h"
int main(int argc, char **argv)
{
int bus = -1, dev_fn = -1, c;
void *card;
while ((c = getopt (argc, argv, "b:d:")) != -1)
{
switch(c)
{
case 'b':
sscanf(optarg, "%i", &bus);
break;
case 'd':
sscanf(optarg, "%i", &dev_fn);
break;
default:
fprintf(stderr,
"Use: \"%s [-b bus] [-d devfn] <fpga_bitstream.bin>\"\n", argv[0]);
fprintf(stderr,
"By default, the first available SPEC is used.\n");
exit(1);
}
}
if (optind >= argc) {
fprintf(stderr, "Expected binary name after options.\n");
exit(1);
}
card = spec_open(bus, dev_fn);
if(!card)
{
fprintf(stderr, "Can't detect a SPEC card under the given adress. Make sure a SPEC card is present in your PC and the driver is loaded.\n");
exit(1);
}
if(spec_load_bitstream(card, argv[optind]) < 0)
{
fprintf(stderr, "Loader failure.\n");
exit(1);
}
spec_close(card);
exit (0);
}
tools/spec-tools.h deleted 100644 → 0
View file @ cd7e94e2
uint32_t spec_get_base(int basenr);
enum {
BASE_BAR0 = 0, /* for wrpc etc (but lm32 is at 0x80000 offset) */
BASE_BAR2,
BASE_BAR4 /* for gennum-internal registers */
};
tools/spec-vuart.c 0 → 100644
View file @ 0c46219d
/* A simple console for accessing the SPEC virtual UART (i.e. for communicating with the WR Core shell
from a Linux terminal. */
#include <stdio.h>
#include <stdlib.h>
#include <unistd.h>
#include <termios.h>
#include <string.h>
#include <sys/signal.h>
#include <sys/types.h>
#include <sys/ioctl.h>
#include <getopt.h>
#include <errno.h>
#include "speclib.h"
static void *card;
static int transfer_byte(int from, int is_control) {
char c;
int ret;
do {
ret = read(from, &c, 1);
} while (ret < 0 && errno == EINTR);
if(ret == 1) {
if(is_control) {
if(c == '\x01') { // C-a
return -1;
}
}
spec_vuart_tx(card, &c, 1);
} else {
fprintf(stderr, "\nnothing to read. probably port disconnected.\n");
return -2;
}
return 0;
}
void term_main(int keep_term)
{
struct termios oldkey, newkey; //place tor old and new port settings for keyboard teletype
int need_exit = 0;
fprintf(stderr, "[press C-a to exit]\n");
if(!keep_term) {
tcgetattr(STDIN_FILENO,&oldkey);
newkey.c_cflag = B9600 | CS8 | CLOCAL | CREAD;
newkey.c_iflag = IGNPAR;
newkey.c_oflag = 0;
newkey.c_lflag = 0;
newkey.c_cc[VMIN]=1;
newkey.c_cc[VTIME]=0;
tcflush(STDIN_FILENO, TCIFLUSH);
tcsetattr(STDIN_FILENO,TCSANOW,&newkey);
}
while(!need_exit) {
fd_set fds;
int ret;
char rx;
struct timeval tv = {0, 10000};
FD_ZERO(&fds);
FD_SET(STDIN_FILENO, &fds);
ret = select(STDIN_FILENO+1, &fds, NULL, NULL, &tv);
if(ret == -1) {
perror("select");
} else if (ret > 0) {
if(FD_ISSET(STDIN_FILENO, &fds)) {
need_exit = transfer_byte(STDIN_FILENO, 1);
}
}
while((spec_vuart_rx(card, &rx, 1)) == 1)
fprintf(stderr,"%c", rx);
}
if(!keep_term)
tcsetattr(STDIN_FILENO,TCSANOW,&oldkey);
}
int main(int argc, char **argv)
{
int bus = -1, dev_fn = -1, c;
uint32_t vuart_base = 0xe0500;
int keep_term = 0;
while ((c = getopt (argc, argv, "b:d:u:k")) != -1)
{
switch(c)
{
case 'b':
sscanf(optarg, "%i", &bus);
break;
case 'd':
sscanf(optarg, "%i", &dev_fn);
break;
case 'u':
sscanf(optarg, "%i", &vuart_base);
break;
case 'k':
keep_term = 1;
break;
default:
fprintf(stderr,
"Use: \"%s [-b bus] [-d devfn] [-u VUART base] [-k]\"\n", argv[0]);
fprintf(stderr,
"By default, the first available SPEC is used and the VUART is assumed at 0x%x.\n \
-k option keeps the terminal config unchanged.", vuart_base);
exit(1);
}
}
card = spec_open(bus, dev_fn);
if(!card)
{
fprintf(stderr, "Can't detect a SPEC card under the given adress. Make sure a SPEC card is present in your PC and the driver is loaded.\n");
exit(1);
}
spec_vuart_init(card, vuart_base);
term_main(keep_term);
spec_close(card);
return 0;
}
tools/speclib.c
View file @ 0c46219d
......@@ -4,33 +4,275 @@
#include <stdint.h>
#include <string.h>
#include <stdio.h>
#include <stdlib.h>
#include <sys/mman.h>
#include <errno.h>
#include <sys/signal.h>
#include <arpa/inet.h>
#include <sys/stat.h>
#include <sys/types.h>
#include <dirent.h>
#include <fcntl.h>
#include <unistd.h>
#include "spec-tools.h"
#include "speclib.h"
#include "wb_uart.h"
uint32_t spec_get_base(int base)
#define BASE_BAR0 0
#define BASE_BAR4 4
struct spec_private {
void *bar0;
void *bar4;
uint32_t vuart_base;
};
/* Checks if there's a SPEC card at bus/def_fn. If one (or both) parameters are < 0, takes first available card and returns 0.
If no cards have been detected, returns -1 */
static int spec_scan(int *bus, int *devfn)
{
FILE *f;
int found = 0;
unsigned int res = ~0;
char s[160];
f = popen("lspci -v", "r");
while(fgets(s, sizeof(s), f)) {
if (!found) {
if (strstr(s, "Device 1a39:0004"))
found = 1;
if (strstr(s, "Device 10dc:018d"))
found = 1;
struct dirent **namelist;
int n, found = 0;
int my_bus, my_devfn;
n = scandir("/sys/bus/pci/drivers/spec", &namelist, 0, 0);
if (n < 0)
{
perror("scandir");
exit(-1);
} else {
while (n--)
{
if(!found && sscanf(namelist[n]->d_name, "0000:%02x:%02x.0", &my_bus, &my_devfn) == 2)
{
if(*bus < 0) *bus = my_bus;
if(*devfn < 0) *devfn = my_devfn;
if(*bus == my_bus && *devfn == my_devfn)
found = 1;
}
free(namelist[n]);
}
if (found && sscanf(s, " Memory at %x", &res) == 1) {
if (!base)
break;
base--;
free(namelist);
}
if(!found)
{
fprintf(stderr,"Can't detect any SPEC card :(\n");
return -1;
}
return 0;
}
/* Maps a particular BAR of given SPEC card and returns its virtual address
(or NULL in case of failure) */
static void *spec_map_area(int bus, int dev, int bar, size_t size)
{
char path[1024];
int fd;
void *ptr;
snprintf(path, sizeof(path), "/sys/bus/pci/drivers/spec/0000:%02x:%02x.0/resource%d", bus, dev, bar);
fd = open(path, O_RDWR | O_SYNC);
if(fd <= 0)
return NULL;
ptr = mmap(NULL, size & ~(getpagesize()-1), PROT_READ | PROT_WRITE, MAP_SHARED, fd, 0);
if((int)ptr == -1)
{
close(fd);
return NULL;
}
return ptr;
}
void *spec_open(int bus, int dev)
{
struct spec_private *card = malloc(sizeof(struct spec_private));
if(!card || spec_scan(&bus, &dev) < 0)
return NULL;
card->bar0 = spec_map_area(bus, dev, BASE_BAR0, 0x100000);
card->bar4 = spec_map_area(bus, dev, BASE_BAR4, 0x1000);
return card;
}
void spec_close(void *card)
{
struct spec_private *p = (struct spec_private *) card;
if(!card)
return;
munmap(p->bar0, 0x100000);
munmap(p->bar4, 0x1000);
free(card);
}
void spec_writel(void *card, uint32_t data, uint32_t addr)
{
struct spec_private *p = (struct spec_private *) card;
*(volatile uint32_t *) (p->bar0 + addr) = data;
}
uint32_t spec_readl(void *card, uint32_t addr)
{
struct spec_private *p = (struct spec_private *) card;
return *(volatile uint32_t *) (p->bar0 + addr);
}
static int vuart_rx(void *card)
{
struct spec_private *p = (struct spec_private *) card;
int rdr = spec_readl(card, p->vuart_base + UART_REG_HOST_RDR);
if(rdr & UART_HOST_RDR_RDY)
return UART_HOST_RDR_DATA_R(rdr);
else
return -1;
}
static void vuart_tx(void *card, int c)
{
struct spec_private *p = (struct spec_private *) card;
while( spec_readl(card, p->vuart_base + UART_REG_SR) & UART_SR_RX_RDY);
spec_writel(card, UART_HOST_TDR_DATA_W(c), p->vuart_base + UART_REG_HOST_TDR);
}
static char *load_binary_file(const char *filename, size_t *size)
{
int i;
struct stat stbuf;
char *buf;
FILE *f;
f = fopen(filename, "r");
if (!f)
return NULL;
if (fstat(fileno(f), &stbuf))
{
fclose(f);
return NULL;
}
if (!S_ISREG(stbuf.st_mode))
{
fclose(f);
return NULL;
}
buf = malloc(stbuf.st_size);
if (!buf)
{
fclose(f);
return NULL;
}
i = fread(buf, 1, stbuf.st_size, f);
if (i < 0) {
fclose(f);
free(buf);
return NULL;
}
if (i != stbuf.st_size) {
fclose(f);
free(buf);
return NULL;
}
fclose(f);
*size = stbuf.st_size;
return buf;
}
int spec_load_bitstream(void *card, const char *filename)
{
struct spec_private *p = (struct spec_private *) card;
char *buf;
size_t size;
buf = load_binary_file(filename, &size);
if(!buf)
return -1;
int rv = loader_low_level(0, p->bar4, buf, size);
free(buf);
return rv;
}
int spec_load_lm32(void *card, const char *filename, uint32_t base_addr)
{
char *buf;
uint32_t *ibuf;
size_t size;
int i;
buf = load_binary_file(filename, &size);
if(!buf)
return -1;
/* Phew... we are there, finally */
spec_writel(card, 0x1deadbee, base_addr + 0x20400);
while ( ! (spec_readl(card, base_addr + 0x20400) & (1<<28)) );
ibuf = (uint32_t *) buf;
for (i = 0; i < (size + 3) / 4; i++)
spec_writel(card, htonl(ibuf[i]), base_addr + i*4);
sync();
for (i = 0; i < (size + 3) / 4; i++) {
uint32_t r = spec_readl(card, base_addr + i * 4);
if (r != htonl(ibuf[i]))
{
fprintf(stderr, "programming error at %x "
"(expected %08x, found %08x)\n", i*4,
htonl(ibuf[i]), r);
return -1;
}
}
pclose(f);
if (res == ~0)
errno = ENODEV;
return res;
sync();
spec_writel(card, 0x0deadbee, base_addr + 0x20400);
return 0;
}
int spec_vuart_init(void *card, uint32_t base_addr)
{
struct spec_private *p = (struct spec_private *) card;
p->vuart_base = base_addr;
return 0;
}
size_t spec_vuart_rx(void *card, char *buffer, size_t size)
{
size_t s = size, n_rx = 0;
while(s--)
{
int c = vuart_rx(card);
if(c < 0)
return n_rx;
*buffer++ = c;
n_rx ++;
}
return n_rx;
}
size_t spec_vuart_tx(void *card, char *buffer, size_t size)
{
size_t s = size;
while(s--)
vuart_tx(card, *buffer++);
return size;
}
tools/speclib.h 0 → 100644
View file @ 0c46219d
#ifndef __SPECLIB_H
#define __SPECLIB_H
#include <stdint.h>
/* 'Opens' the SPEC card at PCI bus [bus], device/function [dev].
Returns a handle to the card or NULL in case of failure. */
void *spec_open(int bus, int dev);
/* Closes the SPEC handle [card] */
void spec_close(void *card);
/* Loads the FPGA bitstream into card [card] from file [filename].
Returns 0 on success. */
int spec_load_bitstream(void *card, const char *filename);
/* Loads the WRC LM32 firmware into card [card] from file [filename]. starting at
address [base_addr]. Returns 0 on success.
WARNING: using improper base address/FPGA firmware will freeze the computer. */
int spec_load_lm32(void *card, const char *filename, uint32_t base_addr);
/* Raw I/O to BAR4 (Wishbone) */
void spec_writel(void *card, uint32_t data, uint32_t addr);
uint32_t spec_readl(void *card, uint32_t addr);
/* Initializes a virtual UART at base address [base_addr]. */
int spec_vuart_init(void *card, uint32_t base_addr);
/* Virtual uart Rx (VUART->Host) and Tx (Host->VUART) functions */
size_t spec_vuart_rx(void *card, char *buffer, size_t size);
size_t spec_vuart_tx(void *card, char *buffer, size_t size);
#endif
tools/wb_uart.h 0 → 100644
View file @ 0c46219d
/*
Register definitions for slave core: Simple Wishbone UART
* File : wb_uart.h
* Author : auto-generated by wbgen2 from simple_uart_wb.wb
* Created : Thu May 3 17:36:38 2012
* Standard : ANSI C
THIS FILE WAS GENERATED BY wbgen2 FROM SOURCE FILE simple_uart_wb.wb
DO NOT HAND-EDIT UNLESS IT'S ABSOLUTELY NECESSARY!
*/
#ifndef __WBGEN2_REGDEFS_SIMPLE_UART_WB_WB
#define __WBGEN2_REGDEFS_SIMPLE_UART_WB_WB
#include <inttypes.h>
#if defined( __GNUC__)
#define PACKED __attribute__ ((packed))
#else
#error "Unsupported compiler?"
#endif
#ifndef __WBGEN2_MACROS_DEFINED__
#define __WBGEN2_MACROS_DEFINED__
#define WBGEN2_GEN_MASK(offset, size) (((1<<(size))-1) << (offset))
#define WBGEN2_GEN_WRITE(value, offset, size) (((value) & ((1<<(size))-1)) << (offset))
#define WBGEN2_GEN_READ(reg, offset, size) (((reg) >> (offset)) & ((1<<(size))-1))
#define WBGEN2_SIGN_EXTEND(value, bits) (((value) & (1<<bits) ? ~((1<<(bits))-1): 0 ) | (value))
#endif
/* definitions for register: Status Register */
/* definitions for field: TX busy in reg: Status Register */
#define UART_SR_TX_BUSY WBGEN2_GEN_MASK(0, 1)
/* definitions for field: RX ready in reg: Status Register */
#define UART_SR_RX_RDY WBGEN2_GEN_MASK(1, 1)
/* definitions for register: Baudrate control register */
/* definitions for register: Transmit data regsiter */
/* definitions for field: Transmit data in reg: Transmit data regsiter */
#define UART_TDR_TX_DATA_MASK WBGEN2_GEN_MASK(0, 8)
#define UART_TDR_TX_DATA_SHIFT 0
#define UART_TDR_TX_DATA_W(value) WBGEN2_GEN_WRITE(value, 0, 8)
#define UART_TDR_TX_DATA_R(reg) WBGEN2_GEN_READ(reg, 0, 8)
/* definitions for register: Receive data regsiter */
/* definitions for field: Received data in reg: Receive data regsiter */
#define UART_RDR_RX_DATA_MASK WBGEN2_GEN_MASK(0, 8)
#define UART_RDR_RX_DATA_SHIFT 0
#define UART_RDR_RX_DATA_W(value) WBGEN2_GEN_WRITE(value, 0, 8)
#define UART_RDR_RX_DATA_R(reg) WBGEN2_GEN_READ(reg, 0, 8)
/* definitions for register: Host VUART Tx register */
/* definitions for field: TX Data in reg: Host VUART Tx register */
#define UART_HOST_TDR_DATA_MASK WBGEN2_GEN_MASK(0, 8)
#define UART_HOST_TDR_DATA_SHIFT 0
#define UART_HOST_TDR_DATA_W(value) WBGEN2_GEN_WRITE(value, 0, 8)
#define UART_HOST_TDR_DATA_R(reg) WBGEN2_GEN_READ(reg, 0, 8)
/* definitions for field: TX Ready in reg: Host VUART Tx register */
#define UART_HOST_TDR_RDY WBGEN2_GEN_MASK(8, 1)
/* definitions for register: Host VUART Rx register */
/* definitions for field: RX Data in reg: Host VUART Rx register */
#define UART_HOST_RDR_DATA_MASK WBGEN2_GEN_MASK(0, 8)
#define UART_HOST_RDR_DATA_SHIFT 0
#define UART_HOST_RDR_DATA_W(value) WBGEN2_GEN_WRITE(value, 0, 8)
#define UART_HOST_RDR_DATA_R(reg) WBGEN2_GEN_READ(reg, 0, 8)
/* definitions for field: RX Ready in reg: Host VUART Rx register */
#define UART_HOST_RDR_RDY WBGEN2_GEN_MASK(8, 1)
/* definitions for field: RX FIFO Count in reg: Host VUART Rx register */
#define UART_HOST_RDR_COUNT_MASK WBGEN2_GEN_MASK(9, 16)
#define UART_HOST_RDR_COUNT_SHIFT 9
#define UART_HOST_RDR_COUNT_W(value) WBGEN2_GEN_WRITE(value, 9, 16)
#define UART_HOST_RDR_COUNT_R(reg) WBGEN2_GEN_READ(reg, 9, 16)
#define UART_REG_SR 0x0
#define UART_REG_HOST_TDR 0x10
#define UART_REG_HOST_RDR 0x14
#endif
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment