The error conditions are very rare and when they happen it means
that we have a bug. So, I do not care much about the possibility
of having many prints in an IRQ handler. Something is really wrong
and we must fix it before releasing.
Signed-off-by: Federico Vaga <federico.vaga@cern.ch>

It turns out that trans_start (see 7499f529) was deprecated in RHEL
kernel versions earlier than in mainstream. This adds logic to take care
of all cases.

Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

Signed-off-by: Federico Vaga <federico.vaga@cern.ch>

The trans_start field from net_device has been removed.

----------------
commit 9b36627acecd5792e81daf1a3bff8eab39ed45fb
Author: Florian Westphal <fw@strlen.de>
Date:   Tue May 3 16:33:14 2016 +0200

    net: remove dev->trans_start
----------------
commit 860e9538a9482bb84589f7d0718a7e6d0a944d58
Author: Florian Westphal <fw@strlen.de>
Date:   Tue May 3 16:33:13 2016 +0200

    treewide: replace dev->trans_start update with helper
----------------
Signed-off-by: Federico Vaga <federico.vaga@cern.ch>

Signed-off-by: Federico Vaga <federico.vaga@cern.ch>

The following patch deprecated the macro DEFINE_PCI_DEVICE_TABLE
in favor of using directly the structure type

------------------
commit 92e112fdbb3cb55b43390426501a7efacd893b96
Author: Joe Perches <joe@perches.com>
Date:   Fri Dec 13 11:36:22 2013 -0700

    PCI/checkpatch: Deprecate DEFINE_PCI_DEVICE_TABLE
------------------
Signed-off-by: Federico Vaga <federico.vaga@cern.ch>

It should not have any effect on previous kernels
Signed-off-by: Federico Vaga <federico.vaga@cern.ch>

Signed-off-by: Federico Vaga <federico.vaga@gmail.com>

Compiling on kernel >=4.5 produces the following error:

  CC [M]  spec-sw/kernel/wr-nic-gpio.o
spec-sw/kernel/wr-nic-gpio.c: In function ‘gc_to_fmc’:
spec-sw/kernel/wr-nic-gpio.c:20:25: error: ‘struct gpio_chip’ has no member named ‘dev’
  struct device *dev = gc->dev;
                         ^
spec-sw/kernel/wr-nic-gpio.c: In function ‘wrn_gpio_init’:
spec-sw/kernel/wr-nic-gpio.c:75:4: error: ‘struct gpio_chip’ has no member named ‘dev’
  gc->dev = &fmc->dev;
    ^

This is due to a change in struct gpio_chip introduced in 4.5,
where the "dev" field was renamed to "parent".

58383c7 gpio: change member .dev to .parent

This patch makes our code compatible with modern kernel versions
Signed-off-by: Federico Vaga <federico.vaga@cern.ch>
Signed-off-by: Dimitris Lampridis <Dimitris.Lampridis@cern.ch>

Signed-off-by: Federico Vaga <federico.vaga@gmail.com>

This reverts commit 0598de40.

This was not a memory leakage because the fmc-bus release that
pointer for us. Is it good?

We allocate and it is someone else us free, it lacks of simmetry.
Probably the register function should be called devm_ like all
the others in the kernel who relase for your the memory. In this
way it is clear the behaviour.

We ack the GN4124 **before** the VIC. The other way around makes the
interrupt handling timing dependent. For instance. When the VIC
VIC_CTL_EMU_LEN_W is too short it may happens that the VIC asserts
the interrupt **before** the GN4124 is acked; then, so do not receive
interrupts anymore from the GN4124 because it misses the VIC edge.
Signed-off-by: Federico Vaga <federico.vaga@cern.ch>
Signed-off-by: Michel Arruat <michel.arruat@cern.ch>

Signed-off-by: Federico Vaga <federico.vaga@cern.ch>

Signed-off-by: Federico Vaga <federico.vaga@cern.ch>

Signed-off-by: Federico Vaga <federico.vaga@cern.ch>

Signed-off-by: Federico Vaga <federico.vaga@cern.ch>

Signed-off-by: Federico Vaga <federico.vaga@cern.ch>

Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

with -V switch
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Changes in the buildsystem.
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Use _ABS in Makefiles wherever possible.
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

FMC_BUS_ABS is passed to Kbuild, which uses different current directory.
It is not trivial to handle FMC_BUS to be absolute or relative path.
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

files wr_nic/.*.o.cmd were not removed
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

This allows parallel build.
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Include parent_common.mk from up directory. Which may contain various
environment definitions such compiler, linker, etc. If such file is not
present it will not affect build.
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

--export FMC_DRV
--correct passing GIT_VERSION
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

We were using vmalloc() assunign that its library was already included by some
other libraries. Today, this is not the case anymore, so we must include it
Signed-off-by: Federico Vaga <federico.vaga@cern.ch>

Signed-off-by: Federico Vaga <federico.vaga@cern.ch>