Simple PCIe FMC carrier with 150T FPGA (SPEC150)
Project description
This is the same card as the SPEC FMC carrier where a larger FPGA is used.
Main Features
-
SPEC FMC carrier based
-
1x Xilinx Spartan6 FPGA (XC6SLX150T-3FGG484C) (is XC6SLX45T-3FGG484C on SPEC)
-
1x SPI 64Mbit flash PROM for multiboot FPGA powerup configuration, storage of the FPGA firmware or of critical data (W25Q64JVSFIQ) (is 32 Mbit flash PROM on the SPEC)
-
PCI Device ID: 0x1A3 (is 0x18D on the SPEC)
Project information
- Official production documentation: EDMS EDA-02189-V4-2
Production Test Software
-
Production Test Software (PTS) for SPEC150
- Note that binaries are committed in this repo, as it is meant for one-time download and not for continuous development.
- Used Ubuntu 12.04.5 LTS.
- The main differences with respect to the SPEC45:
- Gnurabbit drivers updated to accept the SPEC150 device-id
- EEPROM test03 updated to accept different, bigger EEPROM
- Gennum EEPROM test12 updated to write the SPEC150 device-id
- All hdl re-synthesized for SPEC150 and the new binaries are available under the spec/firmwares folder
Contacts
Commercial producers
- SPEC - Creotech, Poland
- SPEC - INCAA Computers, Netherlands
- SPEC - Seven Solutions, Spain
- SPEC - ISD, Greece
General questions about project
- Erik van der Bij - CERN
Status
Date | Event |
---|---|
19-12-2019 | Created design and production files for SPEC150 |
Erik van der Bij - 19 December 2019