Accelerator complex Beam Transfer with Fine Delay and TDC
modules (TE/ABT, Carlier)
SVEC Static Var Compensator – used to measure parameters in each
SVC at CERN, when it is triggered it freezes a buffer and allows a
reconstruction of the events leading to an SVC trip. 64-channel
mentioned in your email.
** Measurements on power system with 64 channel, 128 KS/s, 16-bit
ADC on Rear Transition Module (TE/EPC, F.Aglietti, O.Michels)- 12
- SVEC PS Powering – using white rabbit to receive the B-Field
measurement, to replace the aging B-Train system in the POPS. It will
also allow us to send Imeas and other things
- SVEC SPS Measurement and Acquisition Module – used to measure
regulation parameters in the SPS mains powering system.
Measurements on power system (POPS) with ADC digital readout on FMC
card (TE/EPC, F.Aglietti)
PSB RF interlock interface
** Through the VME-Interlock-RTM and the SVEC, status signals from
the RF power, RF low-level and the Linac 4 Interlock systems are
collected. The information are elaborated to determine what ring(s) of
the PSB should be inhibited. (BE/RF, S.Zorzetti, A.Blas, August 2013)
Reception of the B-train information in the PS, as well as
calculation and distribution of the revolution frequency to the
longitudinal beam control system. Uses differential driver card
FMC-DTX-4CHA. (BE-RF, M. Sundal, Oct.2013).