USB relay box
Overview
The "USB Relay Box 1" is a USB controlled switch box with 1 to 4
switching and a straight connection.
It also contains a reference voltage source and a selection between
three different voltage output.
The pcb layout allows for two different configurations.
This box is used for the calibration of ADC, TDC and Fine delay
mezzanines.
Box variants
Currently the box has two PCB configurations and two box front panel alternatives.
PCB configurations
Configuration 1 | Configuration 2 | |
Not mounted components | R5, R7 (R6 mounted) | R6 (R5, R7 mounted) |
Used in | fmc-adc |
fmc-fd fmc-tdc |
Front panel alternatives
Alternative 1 | Alternative 2 | |
Used in |
fmc-adc fmc-fd |
fmc-tdc |
FMC side | :/uploads/94c8a00e35a2ee777bba63d8cf7a2a60/adc_fmc_side_hires.jpg | :/uploads/d7aea53ec7f71dee854545e8e39b833f/tdc_fmc_side_hires.jpg |
USB side | :/uploads/616ea3b6a24b785ece2a7ee6f16d0246/adc_usb_side_hires.jpg | :/uploads/0d4e019bd4917f82d83a4ec8e8225025/tdc_usb_side_hires.jpg |
Project information
- Official production documentation: ohwr git repository
- Users
- Software
- Frequently Asked Questions
Status
Date | Event |
13-06-2013 | Project creation from fmc-adc tester box. |
mcattin - 28 July 2014