Commit 15d4c085 authored by Javier Serrano's avatar Javier Serrano

First version ready to present

parent 9ecc0113
This diff is collapsed.
......@@ -194,4 +194,84 @@
\end{center}
\end{frame}
\begin{frame}{White Rabbit Node Core}
\begin{center}
\includegraphics[width=0.9\textwidth]{node/node_general.png}
\end{center}
\end{frame}
\section{Status}
\subsection{}
\begin{frame}{Switch status}
\begin{itemize}
\item Version 4.1.2 of gateware/software released in December 2014.
\item Supports 3.4 hardware.
\item Supports VLANs and statistics.
\item Still some bugs visible at high loads.
\end{itemize}
\end{frame}
\begin{frame}{Snake test for the switch}
\begin{center}
\includegraphics[width=0.9\textwidth]{misc/snake_test.jpg}
\end{center}
\end{frame}
\begin{frame}{Node status}
\begin{itemize}
\item Several applications operational, using SPEC and SVEC, e.g. LHC
instability studies.
\item The WR Node Core makes application development faster and easier.
\item Ironing out a few bugs in PPSi.
\end{itemize}
\end{frame}
\section{Roadmap}
\subsection{}
\begin{frame}{Switch roadmap}
\begin{block}{Short term}
\begin{itemize}
\item Fix all bugs uncovered by snake test.
\item Complete SNMP support.
\item Add monit support to identify things like stopped processes.
\item Update documentation.
\item Release in July 2015.
\end{itemize}
\end{block}
\begin{block}{Medium term}
\begin{itemize}
\item End of Summer: support for MTTF estimation. Logging up time, temperatures\ldots
\item 2016: clock and data switch-over, clock hold-over.
\end{itemize}
\end{block}
\end{frame}
\begin{frame}{Node roadmap}
\begin{block}{Short term}
\begin{itemize}
\item Fix PPSi bugs.
\item Improve WR Node Core and offer it as a documented service.
\item RF distribution over WR.
\end{itemize}
\end{block}
\begin{block}{Medium term}
\begin{itemize}
\item Integrate WR into CERN's General Machine Timing system.
\item Integrate new RISC-V processor core into WRNC.
\end{itemize}
\end{block}
\end{frame}
\end{document}
\ No newline at end of file
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment