keywords={IEEE standards;access protocols;local area networks;metropolitan area networks;IEEE standard;MAC service;VLAN bridges;bridged networks;local area networks;media access control service;metropolitan area networks;Bridged circuits;IEEE standards;Local area networks;Media Access Protocol;Metropolitan area networks;Protofcols;Virtual environments;Bridged Network;IEEE 802.1Q(TM);LAN;MAC Bridge;MSTP;Multiple Spanning Tree Protocol;PBN;Provider Bridged Network;RSTP;Rapid Spanning Tree Protocol;SPB Protocol;Shortest Path Bridging Protocol;VLAN Bridge;Virtual Bridged Network;local area network;metropolitan area networks;virtual LAN},
doi={10.1109/IEEESTD.2014.6991462},}
@online{biblio:allan90,
author = {D.B. Sullivan and D.W. Allan and D.A. Howe and F.L. Walls},
title = {{Characterization of Clocks and Oscillators}},
url = {tf.nist.gov/general/pdf/868.pdf},
note = "{NIST Technical Note 1337}",
urldate = {1990},
}
@article{biblio:IEEE802.3,
journal="{IEEE 802.3-2012}",
title = {{IEEE Standard for Ethernet}},
doi = {10.1109/IEEESTD.2012.6419735},
abstract = {Ethernet local area network operation is specified for selected speeds of operation from 1 Mb/s to 100 Gb/s using a common media access control ({MAC}) specification and management information base ({MIB}). The Carrier Sense Multiple Access with Collision Detection ({CSMA}/{CD}) {MAC} protocol specifies shared medium (half duplex) operation, as well as full duplex operation. Speed specific Media Independent Interfaces ({MIIs}) allow use of selected Physical Layer devices ({PHY}) for operation over coaxial, twisted-pair or fiber optic cables. System considerations for multisegment shared access networks describe the use of Repeaters that are defined for operational speeds up to 1000 Mb/s. Local Area Network ({LAN}) operation is supported at all speeds. Other specified capabilities include various {PHY} types for access networks, {PHYs} suitable for metropolitan area network applications, and the provision of power over selected twisted-pair {PHY} types.},
date = {2012-12},
keywords = {1000BASE, 100BASE, 100GBASE, 100 Gigabit Ethernet, 10BASE, 10GBASE, 10 Gigabit Ethernet, 40GBASE, 40 Gigabit Ethernet, attachment unit interface, {AUI}, Auto Negotiation, Backplane Ethernet, bit rate 1 Mbit/s to 100 Gbit/s, carrier sense multiple access, carrier sense multiple access with collision detection, coaxial cable, coaxial cables, computer network management, {CSMA}-{CD}, data processing, {DTE} Power via the {MDI}, {EPON}, Ethernet, Ethernet in the First Mile, Ethernet networks, Ethernet passive optical network, Fast Ethernet, formal specification, full duplex operation, Gigabit Ethernet, {GMII}, {IEEE} standards, {IEEE} Std 802.3-2008 Revision, {IEEE} Std 802.3-2012, information exchange, local area network, {MAC} protocol specification, management, management information base, {MDI}, media access control, media independent interface, medium dependent interface, metropolitan area network, Metropolitan area networks, {MIB}, {MII}, multisegment shared access network, network interfaces,
optical fibre {LAN}, optical repeaters, Passive optical networks, {PHY}, physical coding sublayer, Physical layer, physical layer device, physical medium attachment, {PMA}, Power over Ethernet, repeater, twisted pair cable, twisted pair cables, type field, {VLAN} {TAG}, {XGMII}}
}
@article{biblio:IEEE1588,
journal = "{IEEE 1588-2008}",
title = "{IEEE} {Standard} for {PTP}",
organization = "IEEE",
address = "New York",
}
@Misc{biblio:WRPTP,
author = "E. Cota and M. Lipi\'{n}ski and T. W\l{}ostowski and E. van der Bij and J. Serrano",
title = "{White Rabbit Specification: Draft for Comments}",
title = "{White Rabbit: a PTP application for robust sub-nanosecond synchronization}",
booktitle = "ISPCS",
year = "2011",
}
@Inproceedings{biblio:WRproject,
author = "J. Serrano and others",
title = "{The White Rabbit Project}",
booktitle = "ICALEPCS",
year = "2015",
}
@mastersthesis{biblio:TomekMSc,
author = "T. W\l{}ostowski",
title = "Precise time and frequency transfer in a {White} {Rabbit} network",
year = "2011",
school = "Warsaw University of Technology",
note = {\url{www.ohwr.org/documents/80}},
}
@phdthesis{biblio:MaciekPhD,
author = "Lipi\'{n}ski, Maciej",
title = "{Methods to Increase Reliability and Ensure
Determinism in a White Rabbit Network}",
year = "2016",
school = "Warsaw University of Technology",
note = {\url{cds.cern.ch/record/2261452}},
}
@phdthesis{biblio:CesarPhD,
author = "Prados, Cesar",
title = "{Rock Solid WR Network for GSI/FAIR Control System}",
school = "Technische Universität Darmstadt",
address = "Germany"
}
@ARTICLE{biblio:JosePhD,
author={F. Ramos and others},
journal={IEEE Transactions on Industrial Informatics},
title={Accurate Timing Networks for Dependable Smart Grid Applications},
year={2018},
}
@online{biblio:CERN,
title = {{European Organization for Nuclear Research (CERN)}},
url = {www.cern.ch/},
howpublished = {\url{www.cern.ch/}},
abstract = {{CERN}, the European Organization for Nuclear Research, is one of the world’s largest and most respected centres for scientific research. Its business is fundamental physics, finding out what the Universe is made of and how it works.},
keywords = {Instrumentation, measurement, and metrology; Metrological instrumentation; Electrical to optical converters; Optical directional couplers; Polarization maintaining fibers; Power spectral density; Traveling wave devices; Variable optical attenuators},
number = {11},
pages = {14650--14660},
publisher = {OSA},
title = {Measurement of optical to electrical and electrical to optical delays with ps-level uncertainty},
volume = {26},
month = {May},
year = {2018},
doi = {10.1364/OE.26.014650},
abstract = {We present a new measurement principle to determine the absolute time delay of a waveform from an optical reference plane to an electrical reference plane and vice versa. We demonstrate a method based on this principle with 2 ps uncertainty. This method can be used to perform accurate time delay determinations of optical transceivers used in fiber-optic time-dissemination equipment. As a result the time scales in optical and electrical domain can be related to each other with the same uncertainty. We expect this method will be a new breakthrough in high-accuracy time transfer and absolute calibration of time-transfer equipment.},