Wrpc shell
pll | ||
init mode> | manually run spll_init() function to initialize SoftPll | |
cl channel> | check if SoftPLL is locked for the channel | |
sps channel> | set phase shift for the channel | |
gps channel> | get current and target phase shift for the channel | |
start channel> | start SoftPLL for the channel | |
stop channel> | stop SoftPLL for the channel | |
sdac index> | set the dac | |
gdac index> | get dac's value | |
gui | ||
starts GUI WRPC monitor | ||
stat | ||
prints one line log message | ||
cont | prints log message for each second (Esc to exit back to shell) | |
ptp | ||
start | start WR PTP daemon | |
stop | stops WR PTP daemon | |
mode | ||
prints available WR PTP modes | ||
grandmaster | sets WRPC to operate as Grandmaster clock (requires external 10MHz and 1-PPS reference)* | |
master | sets WRPC to operate as Free-running Master* | |
slave | sets WRPC to operate as Slave node* | |
measure_t24p | ||
starts calibration procedure that measures t2/4 phase transition | ||
time | ||
prints current time from WRPC | ||
raw | prints current time in a raw format (seconds, nanoseconds) | |
set sec> | sets WRPC time | |
sfp | ||
detect | prints the ID of currently used SFP transceiver | |
erase | cleans the SFP database stored in FMC EEPROM | |
add ID> | stores calibration parameters for SFP to the database in FMC EEPROM | |
show | prints all SFP transceivers stored in database | |
match | tries to get calibration parameters from database for currently used SFP transceiver |
* after executing _mode_ command, _ptp start_ is required to start WR PTP daemon in new mode
** requires running _sfp detect_ first
to be continued...