When upstream switch looses connection, the switch connected to it will go out of TRACK_PHASE and then eventually resynchronized... in such case the servo is not re-initialized (e.g. updated counter not set to zero)
to be investigated whether this is good, it seems this behvior changed between 6.0 and 6.1
on BC, the propagated downstream value of grandmaster ID and stepsRemoved is updated (GM ID from BC's own ID to GM's ID) before the BC/WRS is in TRACK_PHASE on the slave port. As a consequence, the downstream devices have a false impression that the time is traceable and good before it is.
me bad, false positive, all works as expected
it seems that pstats are cleared when link is down (ifconfig down), consider to keep it
it seems that pstats are cleared when link is down (ifconfig down), consider to keep it
Adam Wujek (86a323d9) at 19 Mar 14:01
userspace/tools/wr_mon: add key command to refresh or freeze the ou...
... and 47 more commits
SFP DOM values in SNMP agent shows inaccurate values. I.e. the LSB for RX/TX value is always set to 0, so any value below 0.0256mW will show as 0 in SNMP.
Fix: use proper 16bit datatypes in sfp_dom structure so ntohs() does proper conversion.
Fabian Mauchle (fdb6d1d4) at 19 Mar 09:37
userspace/wrs_dump_shmem: increase printed digits for sfp dom
... and 2 more commits
Adam Wujek (4a3fd44a) at 15 Mar 23:46
userspace/tools/wr_mon: add key command to refresh or freeze the ou...
Adam Wujek (a5a0984b) at 14 Mar 01:38
userspace/snmpd/Makefile: don't fail a build if snmptranslate is no...
Adam Wujek (ddd646b4) at 14 Mar 00:06
[FEATURE: #307] Kconfig: allow overwrite of the used PTP version
... and 29 more commits
Adam Wujek (f4b05e31) at 13 Mar 02:24
.gitlab-ci.yml: Remove leftovers from the previous build
... and 23 more commits
Fabian Mauchle (cb790839) at 12 Mar 22:02
userspace/rootfs: copy dot-config from /update if present during fi...
... and 1 more commit
Adam Wujek (66f0452a) at 12 Mar 19:27
.gitlab-ci.yml: Remove leftovers from the previous build
... and 6 more commits
Adam Wujek (a313d2c8) at 12 Mar 14:12
.gitlab-ci.yml: Remove leftovers from the previous build
... and 23 more commits
Some PTP equipment does not work with WRS/WR node if it uses PTP v2.1 in the PTP header (which is BTW against the IEEE1588 standard). Make an option in dot-config, that make PPSi to advertise as PTP v2.0 in PTP messages.
Adam Wujek (35a2b8d6) at 07 Mar 15:56
Adam Wujek (520432e6) at 07 Mar 15:55
.gitlab-ci.yml: copy build log to the console
... and 5 more commits