Kconfig_port_timing.in 266 KB
Newer Older
1 2 3 4 5 6
menu "Port Timing Configuration"
config PTP_OPT_EXT_PORT_CONFIG_ENABLED
	bool "externalPortConfigurationEnabled" 
	default true
	help
	  This option is used by the high accuracy profile to force the port state.
Jean-Claude BAU's avatar
Jean-Claude BAU committed
7
	  When set, BMCA is disabled.
8 9
	  For more details please refer to the IEEE 1588-20019 (clause 17.6.2)

10 11 12
config PTP_SLAVE_ONLY
	depends on PTP_OPT_EXT_PORT_CONFIG_ENABLED="n" 
	bool "slaveOnly" 
13
	default n
14 15 16 17 18
	help
	  A slaveOnly Ordinary Clock utilizes the slaveOnly state machine
	  which does not enable transition to MASTER state.
	  For more details please refer to the IEEE 1588-20019 (clause 9.2.2.1)

19 20
menu "PORT 1"

21 22 23
config PORT01_IFACE
	string "Network interface"
	default "wri1"
24
	help
25
	  Used to set the physical port interface name: "wri[1-18]"
26 27 28 29 30 31 32 33 34 35 36 37 38

config PORT01_FIBER
	int  "Fiber type"
	default 0
	help
	  Used to set the type of fiber (number referring to the corresponding 
	  FIBERXX_PARAMS)

config PORT01_CONSTANT_ASYMMETRY
	int "asymmetryCorrectionPortDS.constantAsymmetry"
	default 0
	help
	   Used to set the constant delay asymmetry.
39 40 41 42 43 44 45 46 47 48 49 50 51 52 53

choice
	prompt "Number of port instances"
	default PORT01_INSTANCE_COUNT_1
	config PORT01_INSTANCE_COUNT_0
	  bool "0"
	config PORT01_INSTANCE_COUNT_1
	  bool "1"
	config PORT01_INSTANCE_COUNT_2
	  bool "2"
endchoice

menu "Instance 1"
	depends on PORT01_INSTANCE_COUNT_1 ||  PORT01_INSTANCE_COUNT_2  

54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79
choice
    prompt "Network protocol"
    default PORT01_INST01_PROTOCOL_RAW
    config PORT01_INST01_PROTOCOL_RAW
        bool "IEEE 802.3"
    config PORT01_INST01_PROTOCOL_UDP_IPV4
        bool "UDP/Ipv4"
endchoice

choice
    prompt "Delay mechanism"
    default PORT01_INST01_MECHANISM_E2E
    config PORT01_INST01_MECHANISM_E2E
        bool "End-to-end"
    config PORT01_INST01_MECHANISM_P2P
        bool "Peer-to-peer"
endchoice

config PORT01_INST01_MONITOR
	bool "SNMP monitoring"
	default y
	help
	  Option to disable or enable triggering errors in SNMP on a port

choice
    prompt "Profile"
80
    default PORT01_INST01_PROFILE_WR
81 82 83
    config PORT01_INST01_PROFILE_PTP
        bool "PTP"
    config PORT01_INST01_PROFILE_WR
Jean-Claude BAU's avatar
Jean-Claude BAU committed
84
        bool "White Rabbit"
85 86 87
    config PORT01_INST01_PROFILE_CUSTOM
        bool "Custom"
endchoice
88 89 90 91 92 93 94 95 96 97 98 99 100 101

choice
    prompt "Desired state"
    depends on PTP_OPT_EXT_PORT_CONFIG_ENABLED
    default PORT01_INST01_DESIRADE_STATE_SLAVE if TIME_BC
    default PORT01_INST01_DESIRADE_STATE_MASTER
    config PORT01_INST01_DESIRADE_STATE_MASTER
        bool "Master"
    config PORT01_INST01_DESIRADE_STATE_SLAVE
        bool "Slave"
    config PORT01_INST01_DESIRADE_STATE_PASSIVE
        bool "Passive"
endchoice

102
config PORT01_INST01_ASYMMETRY_CORRECTION_ENABLE
103
	depends on !PORT01_INST01_PROFILE_HA && !PORT01_INST01_PROFILE_WR
104
    bool "asymmetryCorrectionPortDS.enable"
105
    default y
106 107 108 109
	help
	  When supported, the value TRUE shall indicate that the mechanism of for the calculation
	  of the <delayAsymmetry> for certain media is enabled on the PTP port.

110 111 112 113 114 115 116 117 118 119 120
choice
    prompt "BMCA mode"
    depends on PTP_OPT_EXT_PORT_CONFIG_ENABLED!=y
    default PORT01_INST01_BMODE_MASTER_ONLY if TIME_BC
    default PORT01_INST01_BMODE_AUTO
    config PORT01_INST01_BMODE_MASTER_ONLY
        bool "MasterOnly"
    config PORT01_INST01_BMODE_AUTO
        bool "Auto"
endchoice

121 122 123 124 125 126 127 128 129 130 131 132
config PORT01_INST01_EGRESS_LATENCY
    int "timestampCorrectionPortDS.egressLatency (ps)"
    default 223897
 help
	 Defines the transmission constant delay (ps)

config PORT01_INST01_INGRESS_LATENCY
    int "timestampCorrectionPortDS.ingressLatency (ps)"
    default 226273
 help
	 Defines the reception constant delay (ps)

133
config PORT01_INST01_ANNOUNCE_INTERVAL
134
	int "logAnnounceInterval" 
135 136 137 138 139 140 141 142
	default 1
	range 0 4
	help
	  The mean time interval between transmissions of successive
	  Announce messages. The value is the logarithm to the base 2.
	  The configurable range shall be 0 to 4.

config PORT01_INST01_ANNOUNCE_RECEIPT_TIMEOUT
143
	int "announceReceiptTimeout"
144 145 146
	default 3
	range 2 255
	help
147
	  The announceReceiptTimeout specifies the number of announceIntervals 
148 149 150 151 152 153
	  that must pass without receipt of an Announce message before the 
	  occurrence of the event ANNOUNCE_RECEIPT_TIMEOUT_EXPIRES.
	  The value is the logarithm to the base 2.
	  The configurable range shall be 2 to 255

config PORT01_INST01_SYNC_INTERVAL
154
	int "logSyncInterval"
155 156 157 158 159 160 161 162 163
	default 0
	range -1 1
	help
	  The mean time interval between transmission of successive
	  Sync messages, i.e., the sync-interval, when transmitted
	  as multicast messages. The value is the logarithm to the base 2.
	  The configurable range shall be -1 to +1

config PORT01_INST01_MIN_DELAY_REQ_INTERVAL
164 165
	depends on PORT01_INST01_MECHANISM_E2E  
	int "minDelayRequestInterval"
166 167 168
	default 0
	range 0 5
	help
169
	  The minDelayRequestInterval specifies the minimum permitted
170 171 172 173 174
	  mean time interval between successive Delay_Req messages.
	  The value is the logarithm to the base 2.
	  The configurable range shall be 0 to 5

config PORT01_INST01_MIN_PDELAY_REQ_INTERVAL
175 176
	depends on PORT01_INST01_MECHANISM_P2P  
	int "minPDelayRequestInterval"
177 178 179
	default 0
	range 0 5
	help
180
	  The minPDelayRequestInterval specifies the minimum permitted
181 182 183 184
	  mean time interval between successive Pdelay_Req messages.
	  The value is the logarithm to the base 2.
	  The configurable range shall be 0 to 5

185 186 187 188 189 190 191 192
config PORT01_INST01_L1SYNC_ENABLED
	depends on PORT01_INST01_PROFILE_CUSTOM  
	bool "L1SyncBasicPortDS.L1SyncEnabled"
	default y
	help
	  This parameter specifies whether the L1Sync option is enabled on the PTP Port. If
	  L1SyncEnabled is TRUE, then the L1Sync message exchange is supported and enabled

193
config PORT01_INST01_L1SYNC_INTERVAL
194 195
	depends on PORT01_INST01_PROFILE_HA || (PORT01_INST01_PROFILE_CUSTOM &&  PORT01_INST01_L1SYNC_ENABLED="y") 
	int "L1SyncBasicPortDS.logL1SyncInterval"
196 197 198 199 200 201 202 203 204
	default 0
	range -4 4
	help
	  The L1Sync interval specifies the time interval
	  between successive periodic L1_SYNC TLV.
	  The value is the logarithm to the base 2.
	  The configurable range shall be -4 to 4

config PORT01_INST01_L1SYNC_RECEIPT_TIMEOUT
205 206
	depends on PORT01_INST01_PROFILE_HA || (PORT01_INST01_PROFILE_CUSTOM &&  PORT01_INST01_L1SYNC_ENABLED="y") 
	int "L1SyncBasicPortDS.L1SyncReceiptTimeout"
207 208 209 210 211 212 213 214 215
	default 3
	range 2 10
	help
	  The value of L1SyncReceiptTimeout specifies the number of elapsed 
	  L1SyncIntervals that must pass without reception of the L1_SYNC TLV 
	  before the L1_SYNC TLV reception timeout occurs.
	  The value is the logarithm to the base 2.
	  The configurable range shall be 2 to 10

216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250
config PORT01_INST01_L1SYNC_TX_COHERENCY_IS_REQUIRED
	depends on PORT01_INST01_PROFILE_CUSTOM &&  PORT01_INST01_L1SYNC_ENABLED="y" 
	bool "L1SyncBasicPortDS.txCoherencyIsRequired"
	default y
	help
	   The Boolean attribute txCoherentIsRequired specifies the configuration of the L1Sync port and the
	   expected configuration of its peer L1Sync port. This configuration indicates whether the L1Sync port is
	   required to be a transmit coherent port.

config PORT01_INST01_L1SYNC_RX_COHERENCY_IS_REQUIRED
	depends on PORT01_INST01_PROFILE_CUSTOM &&  PORT01_INST01_L1SYNC_ENABLED="y" 
	bool "L1SyncBasicPortDS.rxCoherencyIsRequired"
	default y
	help
	  The Boolean attribute rxCoherentIsRequired specifies the configuration of the L1Sync port and the
	  expected configuration of its peer L1Sync port. This configuration indicates whether the L1Sync port is
	  required to be a receive coherent port.

config PORT01_INST01_L1SYNC_CONGRUENCY_IS_REQUIRED
	depends on PORT01_INST01_PROFILE_CUSTOM &&  PORT01_INST01_L1SYNC_ENABLED="y" 
	bool "L1SyncBasicPortDS.congruencyIsRequired"
	default y
	help
	  The Boolean attribute congruentIsRequired specifies configuration of the L1Sync port and the expected
	  configuration of its peer L1Sync port. This configuration indicates whether the L1Sync port is required to
	  be a congruent port

config PORT01_INST01_L1SYNC_OPT_PARAMS_ENABLED
	depends on PORT01_INST01_PROFILE_CUSTOM &&  PORT01_INST01_L1SYNC_ENABLED="y" 
	bool "L1SyncBasicPortDS.optParamsEnabled"
	default n
	help
	  The Boolean attribute optParamsEnabled specifies whether the L1Sync port transmitting the L1_SYNC
	  TLV extends this TLV with the information about the optional parameters.

251 252 253 254 255 256 257 258 259
config PORT01_INST01_L1SYNC_OPT_PARAMS_TS_CORRECTED_TX_ENABLED
	depends on PORT01_INST01_L1SYNC_OPT_PARAMS_ENABLED="y" 
	bool "L1SyncBasicPortDS.timestampsCorrectedTx"
	default n
	help
	  When L1SyncOptParamsPortDS.timestampsCorrectedTx is TRUE, 
	  the L1Sync port shall correct the transmitted egress timestamps with 
	  the known value of the phase offset.

260 261 262 263 264
endmenu

menu "Instance 2"
	depends on PORT01_INSTANCE_COUNT_2  

265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290
choice
    prompt "Network protocol"
    default PORT01_INST02_PROTOCOL_RAW
    config PORT01_INST02_PROTOCOL_RAW
        bool "IEEE 802.3"
    config PORT01_INST02_PROTOCOL_UDP_IPV4
        bool "UDP/Ipv4"
endchoice

choice
    prompt "Delay mechanism"
    default PORT01_INST02_MECHANISM_E2E
    config PORT01_INST02_MECHANISM_E2E
        bool "End-to-end"
    config PORT01_INST02_MECHANISM_P2P
        bool "Peer-to-peer"
endchoice

config PORT01_INST02_MONITOR
	bool "SNMP monitoring"
	default y
	help
	  Option to disable or enable triggering errors in SNMP on a port

choice
    prompt "Profile"
291
    default PORT01_INST02_PROFILE_WR
292 293 294
    config PORT01_INST02_PROFILE_PTP
        bool "PTP"
    config PORT01_INST02_PROFILE_WR
Jean-Claude BAU's avatar
Jean-Claude BAU committed
295
        bool "White Rabbit"
296 297 298
    config PORT01_INST02_PROFILE_CUSTOM
        bool "Custom"
endchoice
299 300 301 302 303 304 305 306 307 308 309 310 311 312

choice
    prompt "Desired state"
    depends on PTP_OPT_EXT_PORT_CONFIG_ENABLED
    default PORT01_INST02_DESIRADE_STATE_SLAVE if TIME_BC
    default PORT01_INST02_DESIRADE_STATE_MASTER
    config PORT01_INST02_DESIRADE_STATE_MASTER
        bool "Master"
    config PORT01_INST02_DESIRADE_STATE_SLAVE
        bool "Slave"
    config PORT01_INST02_DESIRADE_STATE_PASSIVE
        bool "Passive"
endchoice

313
config PORT01_INST02_ASYMMETRY_CORRECTION_ENABLE
314
	depends on !PORT01_INST02_PROFILE_HA && !PORT01_INST02_PROFILE_WR
315
    bool "asymmetryCorrectionPortDS.enable"
316
    default y
317 318 319 320
	help
	  When supported, the value TRUE shall indicate that the mechanism of for the calculation
	  of the <delayAsymmetry> for certain media is enabled on the PTP port.

321 322 323 324 325 326 327 328 329 330 331
choice
    prompt "BMCA mode"
    depends on PTP_OPT_EXT_PORT_CONFIG_ENABLED!=y
    default PORT01_INST02_BMODE_MASTER_ONLY if TIME_BC
    default PORT01_INST02_BMODE_AUTO
    config PORT01_INST02_BMODE_MASTER_ONLY
        bool "MasterOnly"
    config PORT01_INST02_BMODE_AUTO
        bool "Auto"
endchoice

332 333 334 335 336 337 338 339 340 341 342 343
config PORT01_INST02_EGRESS_LATENCY
    int "timestampCorrectionPortDS.egressLatency (ps)"
    default 223897
 help
	 Defines the transmission constant delay (ps)

config PORT01_INST02_INGRESS_LATENCY
    int "timestampCorrectionPortDS.ingressLatency (ps)"
    default 226273
 help
	 Defines the reception constant delay (ps)

344
config PORT01_INST02_ANNOUNCE_INTERVAL
345
	int "logAnnounceInterval" 
346 347 348 349 350 351 352 353
	default 1
	range 0 4
	help
	  The mean time interval between transmissions of successive
	  Announce messages. The value is the logarithm to the base 2.
	  The configurable range shall be 0 to 4.

config PORT01_INST02_ANNOUNCE_RECEIPT_TIMEOUT
354
	int "announceReceiptTimeout"
355 356 357
	default 3
	range 2 255
	help
358
	  The announceReceiptTimeout specifies the number of announceIntervals 
359 360 361 362 363 364
	  that must pass without receipt of an Announce message before the 
	  occurrence of the event ANNOUNCE_RECEIPT_TIMEOUT_EXPIRES.
	  The value is the logarithm to the base 2.
	  The configurable range shall be 2 to 255

config PORT01_INST02_SYNC_INTERVAL
365
	int "logSyncInterval"
366 367 368 369 370 371 372 373 374
	default 0
	range -1 1
	help
	  The mean time interval between transmission of successive
	  Sync messages, i.e., the sync-interval, when transmitted
	  as multicast messages. The value is the logarithm to the base 2.
	  The configurable range shall be -1 to +1

config PORT01_INST02_MIN_DELAY_REQ_INTERVAL
375 376
	depends on PORT01_INST02_MECHANISM_E2E  
	int "minDelayRequestInterval"
377 378 379
	default 0
	range 0 5
	help
380
	  The minDelayRequestInterval specifies the minimum permitted
381 382 383 384 385
	  mean time interval between successive Delay_Req messages.
	  The value is the logarithm to the base 2.
	  The configurable range shall be 0 to 5

config PORT01_INST02_MIN_PDELAY_REQ_INTERVAL
386 387
	depends on PORT01_INST02_MECHANISM_P2P  
	int "minPDelayRequestInterval"
388 389 390
	default 0
	range 0 5
	help
391
	  The minPDelayRequestInterval specifies the minimum permitted
392 393 394 395
	  mean time interval between successive Pdelay_Req messages.
	  The value is the logarithm to the base 2.
	  The configurable range shall be 0 to 5

396 397 398 399 400 401 402 403
config PORT01_INST02_L1SYNC_ENABLED
	depends on PORT01_INST02_PROFILE_CUSTOM  
	bool "L1SyncBasicPortDS.L1SyncEnabled"
	default y
	help
	  This parameter specifies whether the L1Sync option is enabled on the PTP Port. If
	  L1SyncEnabled is TRUE, then the L1Sync message exchange is supported and enabled

404
config PORT01_INST02_L1SYNC_INTERVAL
405 406
	depends on PORT01_INST02_PROFILE_HA || (PORT01_INST02_PROFILE_CUSTOM &&  PORT01_INST02_L1SYNC_ENABLED="y") 
	int "L1SyncBasicPortDS.logL1SyncInterval"
407 408 409 410 411 412 413 414 415
	default 0
	range -4 4
	help
	  The L1Sync interval specifies the time interval
	  between successive periodic L1_SYNC TLV.
	  The value is the logarithm to the base 2.
	  The configurable range shall be -4 to 4

config PORT01_INST02_L1SYNC_RECEIPT_TIMEOUT
416 417
	depends on PORT01_INST02_PROFILE_HA || (PORT01_INST02_PROFILE_CUSTOM &&  PORT01_INST02_L1SYNC_ENABLED="y") 
	int "L1SyncBasicPortDS.L1SyncReceiptTimeout"
418 419 420 421 422 423 424 425 426
	default 3
	range 2 10
	help
	  The value of L1SyncReceiptTimeout specifies the number of elapsed 
	  L1SyncIntervals that must pass without reception of the L1_SYNC TLV 
	  before the L1_SYNC TLV reception timeout occurs.
	  The value is the logarithm to the base 2.
	  The configurable range shall be 2 to 10

427 428 429 430 431 432 433 434 435 436 437 438 439 440 441 442 443 444 445 446 447 448 449 450 451 452 453 454 455 456 457 458 459 460 461
config PORT01_INST02_L1SYNC_TX_COHERENCY_IS_REQUIRED
	depends on PORT01_INST02_PROFILE_CUSTOM &&  PORT01_INST02_L1SYNC_ENABLED="y" 
	bool "L1SyncBasicPortDS.txCoherencyIsRequired"
	default y
	help
	   The Boolean attribute txCoherentIsRequired specifies the configuration of the L1Sync port and the
	   expected configuration of its peer L1Sync port. This configuration indicates whether the L1Sync port is
	   required to be a transmit coherent port.

config PORT01_INST02_L1SYNC_RX_COHERENCY_IS_REQUIRED
	depends on PORT01_INST02_PROFILE_CUSTOM &&  PORT01_INST02_L1SYNC_ENABLED="y" 
	bool "L1SyncBasicPortDS.rxCoherencyIsRequired"
	default y
	help
	  The Boolean attribute rxCoherentIsRequired specifies the configuration of the L1Sync port and the
	  expected configuration of its peer L1Sync port. This configuration indicates whether the L1Sync port is
	  required to be a receive coherent port.

config PORT01_INST02_L1SYNC_CONGRUENCY_IS_REQUIRED
	depends on PORT01_INST02_PROFILE_CUSTOM &&  PORT01_INST02_L1SYNC_ENABLED="y" 
	bool "L1SyncBasicPortDS.congruencyIsRequired"
	default y
	help
	  The Boolean attribute congruentIsRequired specifies configuration of the L1Sync port and the expected
	  configuration of its peer L1Sync port. This configuration indicates whether the L1Sync port is required to
	  be a congruent port

config PORT01_INST02_L1SYNC_OPT_PARAMS_ENABLED
	depends on PORT01_INST02_PROFILE_CUSTOM &&  PORT01_INST02_L1SYNC_ENABLED="y" 
	bool "L1SyncBasicPortDS.optParamsEnabled"
	default n
	help
	  The Boolean attribute optParamsEnabled specifies whether the L1Sync port transmitting the L1_SYNC
	  TLV extends this TLV with the information about the optional parameters.

462 463 464 465 466 467 468 469 470
config PORT01_INST02_L1SYNC_OPT_PARAMS_TS_CORRECTED_TX_ENABLED
	depends on PORT01_INST02_L1SYNC_OPT_PARAMS_ENABLED="y" 
	bool "L1SyncBasicPortDS.timestampsCorrectedTx"
	default n
	help
	  When L1SyncOptParamsPortDS.timestampsCorrectedTx is TRUE, 
	  the L1Sync port shall correct the transmitted egress timestamps with 
	  the known value of the phase offset.

471 472 473 474 475 476
endmenu

endmenu

menu "PORT 2"

477 478 479 480
config PORT02_IFACE
	string "Network interface"
	default "wri2"
	help
481
	  Used to set the physical port interface name: "wri[1-18]"
482 483 484 485 486 487 488 489 490 491 492

config PORT02_FIBER
	int  "Fiber type"
	default 0
	help
	  Used to set the type of fiber (number referring to the corresponding 
	  FIBERXX_PARAMS)

config PORT02_CONSTANT_ASYMMETRY
	int "asymmetryCorrectionPortDS.constantAsymmetry"
	default 0
493
	help
494
	   Used to set the constant delay asymmetry.
495 496 497 498 499 500 501 502 503 504 505 506 507 508 509

choice
	prompt "Number of port instances"
	default PORT02_INSTANCE_COUNT_1
	config PORT02_INSTANCE_COUNT_0
	  bool "0"
	config PORT02_INSTANCE_COUNT_1
	  bool "1"
	config PORT02_INSTANCE_COUNT_2
	  bool "2"
endchoice

menu "Instance 1"
	depends on PORT02_INSTANCE_COUNT_1 ||  PORT02_INSTANCE_COUNT_2  

510 511 512 513 514 515 516 517 518 519 520 521 522 523 524 525 526 527 528 529 530 531 532 533 534 535
choice
    prompt "Network protocol"
    default PORT02_INST01_PROTOCOL_RAW
    config PORT02_INST01_PROTOCOL_RAW
        bool "IEEE 802.3"
    config PORT02_INST01_PROTOCOL_UDP_IPV4
        bool "UDP/Ipv4"
endchoice

choice
    prompt "Delay mechanism"
    default PORT02_INST01_MECHANISM_E2E
    config PORT02_INST01_MECHANISM_E2E
        bool "End-to-end"
    config PORT02_INST01_MECHANISM_P2P
        bool "Peer-to-peer"
endchoice

config PORT02_INST01_MONITOR
	bool "SNMP monitoring"
	default y
	help
	  Option to disable or enable triggering errors in SNMP on a port

choice
    prompt "Profile"
536
    default PORT02_INST01_PROFILE_WR
537 538 539
    config PORT02_INST01_PROFILE_PTP
        bool "PTP"
    config PORT02_INST01_PROFILE_WR
Jean-Claude BAU's avatar
Jean-Claude BAU committed
540
        bool "White Rabbit"
541 542 543
    config PORT02_INST01_PROFILE_CUSTOM
        bool "Custom"
endchoice
544 545 546 547 548 549 550 551 552 553 554 555 556

choice
    prompt "Desired state"
    depends on PTP_OPT_EXT_PORT_CONFIG_ENABLED
    default PORT02_INST01_DESIRADE_STATE_MASTER
    config PORT02_INST01_DESIRADE_STATE_MASTER
        bool "Master"
    config PORT02_INST01_DESIRADE_STATE_SLAVE
        bool "Slave"
    config PORT02_INST01_DESIRADE_STATE_PASSIVE
        bool "Passive"
endchoice

557
config PORT02_INST01_ASYMMETRY_CORRECTION_ENABLE
558
	depends on !PORT02_INST01_PROFILE_HA && !PORT02_INST01_PROFILE_WR
559
    bool "asymmetryCorrectionPortDS.enable"
560
    default y
561 562 563 564
	help
	  When supported, the value TRUE shall indicate that the mechanism of for the calculation
	  of the <delayAsymmetry> for certain media is enabled on the PTP port.

565 566 567 568 569 570 571 572 573 574 575
choice
    prompt "BMCA mode"
    depends on PTP_OPT_EXT_PORT_CONFIG_ENABLED!=y
    default PORT02_INST01_BMODE_MASTER_ONLY if TIME_BC
    default PORT02_INST01_BMODE_AUTO
    config PORT02_INST01_BMODE_MASTER_ONLY
        bool "MasterOnly"
    config PORT02_INST01_BMODE_AUTO
        bool "Auto"
endchoice

576 577 578 579 580 581 582 583 584 585 586 587
config PORT02_INST01_EGRESS_LATENCY
    int "timestampCorrectionPortDS.egressLatency (ps)"
    default 224037
 help
	 Defines the transmission constant delay (ps)

config PORT02_INST01_INGRESS_LATENCY
    int "timestampCorrectionPortDS.ingressLatency (ps)"
    default 226377
 help
	 Defines the reception constant delay (ps)

588
config PORT02_INST01_ANNOUNCE_INTERVAL
589
	int "logAnnounceInterval" 
590 591 592 593 594 595 596 597
	default 1
	range 0 4
	help
	  The mean time interval between transmissions of successive
	  Announce messages. The value is the logarithm to the base 2.
	  The configurable range shall be 0 to 4.

config PORT02_INST01_ANNOUNCE_RECEIPT_TIMEOUT
598
	int "announceReceiptTimeout"
599 600 601
	default 3
	range 2 255
	help
602
	  The announceReceiptTimeout specifies the number of announceIntervals 
603 604 605 606 607 608
	  that must pass without receipt of an Announce message before the 
	  occurrence of the event ANNOUNCE_RECEIPT_TIMEOUT_EXPIRES.
	  The value is the logarithm to the base 2.
	  The configurable range shall be 2 to 255

config PORT02_INST01_SYNC_INTERVAL
609
	int "logSyncInterval"
610 611 612 613 614 615 616 617 618
	default 0
	range -1 1
	help
	  The mean time interval between transmission of successive
	  Sync messages, i.e., the sync-interval, when transmitted
	  as multicast messages. The value is the logarithm to the base 2.
	  The configurable range shall be -1 to +1

config PORT02_INST01_MIN_DELAY_REQ_INTERVAL
619 620
	depends on PORT02_INST01_MECHANISM_E2E  
	int "minDelayRequestInterval"
621 622 623
	default 0
	range 0 5
	help
624
	  The minDelayRequestInterval specifies the minimum permitted
625 626 627 628 629
	  mean time interval between successive Delay_Req messages.
	  The value is the logarithm to the base 2.
	  The configurable range shall be 0 to 5

config PORT02_INST01_MIN_PDELAY_REQ_INTERVAL
630 631
	depends on PORT02_INST01_MECHANISM_P2P  
	int "minPDelayRequestInterval"
632 633 634
	default 0
	range 0 5
	help
635
	  The minPDelayRequestInterval specifies the minimum permitted
636 637 638 639
	  mean time interval between successive Pdelay_Req messages.
	  The value is the logarithm to the base 2.
	  The configurable range shall be 0 to 5

640 641 642 643 644 645 646 647
config PORT02_INST01_L1SYNC_ENABLED
	depends on PORT02_INST01_PROFILE_CUSTOM  
	bool "L1SyncBasicPortDS.L1SyncEnabled"
	default y
	help
	  This parameter specifies whether the L1Sync option is enabled on the PTP Port. If
	  L1SyncEnabled is TRUE, then the L1Sync message exchange is supported and enabled

648
config PORT02_INST01_L1SYNC_INTERVAL
649 650
	depends on PORT02_INST01_PROFILE_HA || (PORT02_INST01_PROFILE_CUSTOM &&  PORT02_INST01_L1SYNC_ENABLED="y") 
	int "L1SyncBasicPortDS.logL1SyncInterval"
651 652 653 654 655 656 657 658 659
	default 0
	range -4 4
	help
	  The L1Sync interval specifies the time interval
	  between successive periodic L1_SYNC TLV.
	  The value is the logarithm to the base 2.
	  The configurable range shall be -4 to 4

config PORT02_INST01_L1SYNC_RECEIPT_TIMEOUT
660 661
	depends on PORT02_INST01_PROFILE_HA || (PORT02_INST01_PROFILE_CUSTOM &&  PORT02_INST01_L1SYNC_ENABLED="y") 
	int "L1SyncBasicPortDS.L1SyncReceiptTimeout"
662 663 664 665 666 667 668 669 670
	default 3
	range 2 10
	help
	  The value of L1SyncReceiptTimeout specifies the number of elapsed 
	  L1SyncIntervals that must pass without reception of the L1_SYNC TLV 
	  before the L1_SYNC TLV reception timeout occurs.
	  The value is the logarithm to the base 2.
	  The configurable range shall be 2 to 10

671 672 673 674 675 676 677 678 679 680 681 682 683 684 685 686 687 688 689 690 691 692 693 694 695 696 697 698 699 700 701 702 703 704 705
config PORT02_INST01_L1SYNC_TX_COHERENCY_IS_REQUIRED
	depends on PORT02_INST01_PROFILE_CUSTOM &&  PORT02_INST01_L1SYNC_ENABLED="y" 
	bool "L1SyncBasicPortDS.txCoherencyIsRequired"
	default y
	help
	   The Boolean attribute txCoherentIsRequired specifies the configuration of the L1Sync port and the
	   expected configuration of its peer L1Sync port. This configuration indicates whether the L1Sync port is
	   required to be a transmit coherent port.

config PORT02_INST01_L1SYNC_RX_COHERENCY_IS_REQUIRED
	depends on PORT02_INST01_PROFILE_CUSTOM &&  PORT02_INST01_L1SYNC_ENABLED="y" 
	bool "L1SyncBasicPortDS.rxCoherencyIsRequired"
	default y
	help
	  The Boolean attribute rxCoherentIsRequired specifies the configuration of the L1Sync port and the
	  expected configuration of its peer L1Sync port. This configuration indicates whether the L1Sync port is
	  required to be a receive coherent port.

config PORT02_INST01_L1SYNC_CONGRUENCY_IS_REQUIRED
	depends on PORT02_INST01_PROFILE_CUSTOM &&  PORT02_INST01_L1SYNC_ENABLED="y" 
	bool "L1SyncBasicPortDS.congruencyIsRequired"
	default y
	help
	  The Boolean attribute congruentIsRequired specifies configuration of the L1Sync port and the expected
	  configuration of its peer L1Sync port. This configuration indicates whether the L1Sync port is required to
	  be a congruent port

config PORT02_INST01_L1SYNC_OPT_PARAMS_ENABLED
	depends on PORT02_INST01_PROFILE_CUSTOM &&  PORT02_INST01_L1SYNC_ENABLED="y" 
	bool "L1SyncBasicPortDS.optParamsEnabled"
	default n
	help
	  The Boolean attribute optParamsEnabled specifies whether the L1Sync port transmitting the L1_SYNC
	  TLV extends this TLV with the information about the optional parameters.

706 707 708 709 710 711 712 713 714
config PORT02_INST01_L1SYNC_OPT_PARAMS_TS_CORRECTED_TX_ENABLED
	depends on PORT02_INST01_L1SYNC_OPT_PARAMS_ENABLED="y" 
	bool "L1SyncBasicPortDS.timestampsCorrectedTx"
	default n
	help
	  When L1SyncOptParamsPortDS.timestampsCorrectedTx is TRUE, 
	  the L1Sync port shall correct the transmitted egress timestamps with 
	  the known value of the phase offset.

715 716 717 718 719
endmenu

menu "Instance 2"
	depends on PORT02_INSTANCE_COUNT_2  

720 721 722 723 724 725 726 727 728 729 730 731 732 733 734 735 736 737 738 739 740 741 742 743 744 745
choice
    prompt "Network protocol"
    default PORT02_INST02_PROTOCOL_RAW
    config PORT02_INST02_PROTOCOL_RAW
        bool "IEEE 802.3"
    config PORT02_INST02_PROTOCOL_UDP_IPV4
        bool "UDP/Ipv4"
endchoice

choice
    prompt "Delay mechanism"
    default PORT02_INST02_MECHANISM_E2E
    config PORT02_INST02_MECHANISM_E2E
        bool "End-to-end"
    config PORT02_INST02_MECHANISM_P2P
        bool "Peer-to-peer"
endchoice

config PORT02_INST02_MONITOR
	bool "SNMP monitoring"
	default y
	help
	  Option to disable or enable triggering errors in SNMP on a port

choice
    prompt "Profile"
746
    default PORT02_INST02_PROFILE_WR
747 748 749
    config PORT02_INST02_PROFILE_PTP
        bool "PTP"
    config PORT02_INST02_PROFILE_WR
Jean-Claude BAU's avatar
Jean-Claude BAU committed
750
        bool "White Rabbit"
751 752 753
    config PORT02_INST02_PROFILE_CUSTOM
        bool "Custom"
endchoice
754 755 756 757 758 759 760 761 762 763 764 765 766

choice
    prompt "Desired state"
    depends on PTP_OPT_EXT_PORT_CONFIG_ENABLED
    default PORT02_INST02_DESIRADE_STATE_MASTER
    config PORT02_INST02_DESIRADE_STATE_MASTER
        bool "Master"
    config PORT02_INST02_DESIRADE_STATE_SLAVE
        bool "Slave"
    config PORT02_INST02_DESIRADE_STATE_PASSIVE
        bool "Passive"
endchoice

767
config PORT02_INST02_ASYMMETRY_CORRECTION_ENABLE
768
	depends on !PORT02_INST02_PROFILE_HA && !PORT02_INST02_PROFILE_WR
769
    bool "asymmetryCorrectionPortDS.enable"
770
    default y
771 772 773 774
	help
	  When supported, the value TRUE shall indicate that the mechanism of for the calculation
	  of the <delayAsymmetry> for certain media is enabled on the PTP port.

775 776 777 778 779 780 781 782 783 784 785
choice
    prompt "BMCA mode"
    depends on PTP_OPT_EXT_PORT_CONFIG_ENABLED!=y
    default PORT02_INST02_BMODE_MASTER_ONLY if TIME_BC
    default PORT02_INST02_BMODE_AUTO
    config PORT02_INST02_BMODE_MASTER_ONLY
        bool "MasterOnly"
    config PORT02_INST02_BMODE_AUTO
        bool "Auto"
endchoice

786 787 788 789 790 791 792 793 794 795 796 797
config PORT02_INST02_EGRESS_LATENCY
    int "timestampCorrectionPortDS.egressLatency (ps)"
    default 224037
 help
	 Defines the transmission constant delay (ps)

config PORT02_INST02_INGRESS_LATENCY
    int "timestampCorrectionPortDS.ingressLatency (ps)"
    default 226377
 help
	 Defines the reception constant delay (ps)

798
config PORT02_INST02_ANNOUNCE_INTERVAL
799
	int "logAnnounceInterval" 
800 801 802 803 804 805 806 807
	default 1
	range 0 4
	help
	  The mean time interval between transmissions of successive
	  Announce messages. The value is the logarithm to the base 2.
	  The configurable range shall be 0 to 4.

config PORT02_INST02_ANNOUNCE_RECEIPT_TIMEOUT
808
	int "announceReceiptTimeout"
809 810 811
	default 3
	range 2 255
	help
812
	  The announceReceiptTimeout specifies the number of announceIntervals 
813 814 815 816 817 818
	  that must pass without receipt of an Announce message before the 
	  occurrence of the event ANNOUNCE_RECEIPT_TIMEOUT_EXPIRES.
	  The value is the logarithm to the base 2.
	  The configurable range shall be 2 to 255

config PORT02_INST02_SYNC_INTERVAL
819
	int "logSyncInterval"
820 821 822 823 824 825 826 827 828
	default 0
	range -1 1
	help
	  The mean time interval between transmission of successive
	  Sync messages, i.e., the sync-interval, when transmitted
	  as multicast messages. The value is the logarithm to the base 2.
	  The configurable range shall be -1 to +1

config PORT02_INST02_MIN_DELAY_REQ_INTERVAL
829 830
	depends on PORT02_INST02_MECHANISM_E2E  
	int "minDelayRequestInterval"
831 832 833
	default 0
	range 0 5
	help
834
	  The minDelayRequestInterval specifies the minimum permitted
835 836 837 838 839
	  mean time interval between successive Delay_Req messages.
	  The value is the logarithm to the base 2.
	  The configurable range shall be 0 to 5

config PORT02_INST02_MIN_PDELAY_REQ_INTERVAL
840 841
	depends on PORT02_INST02_MECHANISM_P2P  
	int "minPDelayRequestInterval"
842 843 844
	default 0
	range 0 5
	help
845
	  The minPDelayRequestInterval specifies the minimum permitted
846 847 848 849
	  mean time interval between successive Pdelay_Req messages.
	  The value is the logarithm to the base 2.
	  The configurable range shall be 0 to 5

850 851 852 853 854 855 856 857
config PORT02_INST02_L1SYNC_ENABLED
	depends on PORT02_INST02_PROFILE_CUSTOM  
	bool "L1SyncBasicPortDS.L1SyncEnabled"
	default y
	help
	  This parameter specifies whether the L1Sync option is enabled on the PTP Port. If
	  L1SyncEnabled is TRUE, then the L1Sync message exchange is supported and enabled

858
config PORT02_INST02_L1SYNC_INTERVAL
859 860
	depends on PORT02_INST02_PROFILE_HA || (PORT02_INST02_PROFILE_CUSTOM &&  PORT02_INST02_L1SYNC_ENABLED="y") 
	int "L1SyncBasicPortDS.logL1SyncInterval"
861 862 863 864 865 866 867 868 869
	default 0
	range -4 4
	help
	  The L1Sync interval specifies the time interval
	  between successive periodic L1_SYNC TLV.
	  The value is the logarithm to the base 2.
	  The configurable range shall be -4 to 4

config PORT02_INST02_L1SYNC_RECEIPT_TIMEOUT
870 871
	depends on PORT02_INST02_PROFILE_HA || (PORT02_INST02_PROFILE_CUSTOM &&  PORT02_INST02_L1SYNC_ENABLED="y") 
	int "L1SyncBasicPortDS.L1SyncReceiptTimeout"
872 873 874 875 876 877 878 879 880
	default 3
	range 2 10
	help
	  The value of L1SyncReceiptTimeout specifies the number of elapsed 
	  L1SyncIntervals that must pass without reception of the L1_SYNC TLV 
	  before the L1_SYNC TLV reception timeout occurs.
	  The value is the logarithm to the base 2.
	  The configurable range shall be 2 to 10

881 882 883 884 885 886 887 888 889 890 891 892 893 894 895 896 897 898 899 900 901 902 903 904 905 906 907 908 909 910 911 912 913 914 915
config PORT02_INST02_L1SYNC_TX_COHERENCY_IS_REQUIRED
	depends on PORT02_INST02_PROFILE_CUSTOM &&  PORT02_INST02_L1SYNC_ENABLED="y" 
	bool "L1SyncBasicPortDS.txCoherencyIsRequired"
	default y
	help
	   The Boolean attribute txCoherentIsRequired specifies the configuration of the L1Sync port and the
	   expected configuration of its peer L1Sync port. This configuration indicates whether the L1Sync port is
	   required to be a transmit coherent port.

config PORT02_INST02_L1SYNC_RX_COHERENCY_IS_REQUIRED
	depends on PORT02_INST02_PROFILE_CUSTOM &&  PORT02_INST02_L1SYNC_ENABLED="y" 
	bool "L1SyncBasicPortDS.rxCoherencyIsRequired"
	default y
	help
	  The Boolean attribute rxCoherentIsRequired specifies the configuration of the L1Sync port and the
	  expected configuration of its peer L1Sync port. This configuration indicates whether the L1Sync port is
	  required to be a receive coherent port.

config PORT02_INST02_L1SYNC_CONGRUENCY_IS_REQUIRED
	depends on PORT02_INST02_PROFILE_CUSTOM &&  PORT02_INST02_L1SYNC_ENABLED="y" 
	bool "L1SyncBasicPortDS.congruencyIsRequired"
	default y
	help
	  The Boolean attribute congruentIsRequired specifies configuration of the L1Sync port and the expected
	  configuration of its peer L1Sync port. This configuration indicates whether the L1Sync port is required to
	  be a congruent port

config PORT02_INST02_L1SYNC_OPT_PARAMS_ENABLED
	depends on PORT02_INST02_PROFILE_CUSTOM &&  PORT02_INST02_L1SYNC_ENABLED="y" 
	bool "L1SyncBasicPortDS.optParamsEnabled"
	default n
	help
	  The Boolean attribute optParamsEnabled specifies whether the L1Sync port transmitting the L1_SYNC
	  TLV extends this TLV with the information about the optional parameters.

916 917 918 919 920 921 922 923 924
config PORT02_INST02_L1SYNC_OPT_PARAMS_TS_CORRECTED_TX_ENABLED
	depends on PORT02_INST02_L1SYNC_OPT_PARAMS_ENABLED="y" 
	bool "L1SyncBasicPortDS.timestampsCorrectedTx"
	default n
	help
	  When L1SyncOptParamsPortDS.timestampsCorrectedTx is TRUE, 
	  the L1Sync port shall correct the transmitted egress timestamps with 
	  the known value of the phase offset.

925 926 927 928 929 930
endmenu

endmenu

menu "PORT 3"

931 932 933 934
config PORT03_IFACE
	string "Network interface"
	default "wri3"
	help
935
	  Used to set the physical port interface name: "wri[1-18]"
936 937 938 939 940 941 942 943 944 945 946

config PORT03_FIBER
	int  "Fiber type"
	default 0
	help
	  Used to set the type of fiber (number referring to the corresponding 
	  FIBERXX_PARAMS)

config PORT03_CONSTANT_ASYMMETRY
	int "asymmetryCorrectionPortDS.constantAsymmetry"
	default 0
947
	help
948
	   Used to set the constant delay asymmetry.
949 950 951 952 953 954 955 956 957 958 959 960 961 962 963

choice
	prompt "Number of port instances"
	default PORT03_INSTANCE_COUNT_1
	config PORT03_INSTANCE_COUNT_0
	  bool "0"
	config PORT03_INSTANCE_COUNT_1
	  bool "1"
	config PORT03_INSTANCE_COUNT_2
	  bool "2"
endchoice

menu "Instance 1"
	depends on PORT03_INSTANCE_COUNT_1 ||  PORT03_INSTANCE_COUNT_2  

964 965 966 967 968 969 970 971 972 973 974 975 976 977 978 979 980 981 982 983 984 985 986 987 988 989
choice
    prompt "Network protocol"
    default PORT03_INST01_PROTOCOL_RAW
    config PORT03_INST01_PROTOCOL_RAW
        bool "IEEE 802.3"
    config PORT03_INST01_PROTOCOL_UDP_IPV4
        bool "UDP/Ipv4"
endchoice

choice
    prompt "Delay mechanism"
    default PORT03_INST01_MECHANISM_E2E
    config PORT03_INST01_MECHANISM_E2E
        bool "End-to-end"
    config PORT03_INST01_MECHANISM_P2P
        bool "Peer-to-peer"
endchoice

config PORT03_INST01_MONITOR
	bool "SNMP monitoring"
	default y
	help
	  Option to disable or enable triggering errors in SNMP on a port

choice
    prompt "Profile"
990
    default PORT03_INST01_PROFILE_WR
991 992 993
    config PORT03_INST01_PROFILE_PTP
        bool "PTP"
    config PORT03_INST01_PROFILE_WR
Jean-Claude BAU's avatar
Jean-Claude BAU committed
994
        bool "White Rabbit"
995 996 997
    config PORT03_INST01_PROFILE_CUSTOM
        bool "Custom"
endchoice
998 999 1000 1001 1002 1003 1004 1005 1006 1007 1008 1009 1010

choice
    prompt "Desired state"
    depends on PTP_OPT_EXT_PORT_CONFIG_ENABLED
    default PORT03_INST01_DESIRADE_STATE_MASTER
    config PORT03_INST01_DESIRADE_STATE_MASTER
        bool "Master"
    config PORT03_INST01_DESIRADE_STATE_SLAVE
        bool "Slave"
    config PORT03_INST01_DESIRADE_STATE_PASSIVE
        bool "Passive"
endchoice

1011
config PORT03_INST01_ASYMMETRY_CORRECTION_ENABLE
1012
	depends on !PORT03_INST01_PROFILE_HA && !PORT03_INST01_PROFILE_WR
1013
    bool "asymmetryCorrectionPortDS.enable"
1014
    default y
1015 1016 1017 1018
	help
	  When supported, the value TRUE shall indicate that the mechanism of for the calculation
	  of the <delayAsymmetry> for certain media is enabled on the PTP port.

1019 1020 1021 1022 1023 1024 1025 1026 1027 1028 1029
choice
    prompt "BMCA mode"
    depends on PTP_OPT_EXT_PORT_CONFIG_ENABLED!=y
    default PORT03_INST01_BMODE_MASTER_ONLY if TIME_BC
    default PORT03_INST01_BMODE_AUTO
    config PORT03_INST01_BMODE_MASTER_ONLY
        bool "MasterOnly"
    config PORT03_INST01_BMODE_AUTO
        bool "Auto"
endchoice

1030 1031 1032 1033 1034 1035 1036 1037 1038 1039 1040 1041
config PORT03_INST01_EGRESS_LATENCY
    int "timestampCorrectionPortDS.egressLatency (ps)"
    default 224142
 help
	 Defines the transmission constant delay (ps)

config PORT03_INST01_INGRESS_LATENCY
    int "timestampCorrectionPortDS.ingressLatency (ps)"
    default 226638
 help
	 Defines the reception constant delay (ps)

1042
config PORT03_INST01_ANNOUNCE_INTERVAL
1043
	int "logAnnounceInterval" 
1044 1045 1046 1047 1048 1049 1050 1051
	default 1
	range 0 4
	help
	  The mean time interval between transmissions of successive
	  Announce messages. The value is the logarithm to the base 2.
	  The configurable range shall be 0 to 4.

config PORT03_INST01_ANNOUNCE_RECEIPT_TIMEOUT
1052
	int "announceReceiptTimeout"
1053 1054 1055
	default 3
	range 2 255
	help
1056
	  The announceReceiptTimeout specifies the number of announceIntervals 
1057 1058 1059 1060 1061 1062
	  that must pass without receipt of an Announce message before the 
	  occurrence of the event ANNOUNCE_RECEIPT_TIMEOUT_EXPIRES.
	  The value is the logarithm to the base 2.
	  The configurable range shall be 2 to 255

config PORT03_INST01_SYNC_INTERVAL
1063
	int "logSyncInterval"
1064 1065 1066 1067 1068 1069 1070 1071 1072
	default 0
	range -1 1
	help
	  The mean time interval between transmission of successive
	  Sync messages, i.e., the sync-interval, when transmitted
	  as multicast messages. The value is the logarithm to the base 2.
	  The configurable range shall be -1 to +1

config PORT03_INST01_MIN_DELAY_REQ_INTERVAL
1073 1074
	depends on PORT03_INST01_MECHANISM_E2E  
	int "minDelayRequestInterval"
1075 1076 1077
	default 0
	range 0 5
	help
1078
	  The minDelayRequestInterval specifies the minimum permitted
1079 1080 1081 1082 1083
	  mean time interval between successive Delay_Req messages.
	  The value is the logarithm to the base 2.
	  The configurable range shall be 0 to 5

config PORT03_INST01_MIN_PDELAY_REQ_INTERVAL
1084 1085
	depends on PORT03_INST01_MECHANISM_P2P  
	int "minPDelayRequestInterval"
1086 1087 1088
	default 0
	range 0 5
	help
1089
	  The minPDelayRequestInterval specifies the minimum permitted
1090 1091 1092 1093
	  mean time interval between successive Pdelay_Req messages.
	  The value is the logarithm to the base 2.
	  The configurable range shall be 0 to 5

1094 1095 1096 1097 1098 1099 1100 1101
config PORT03_INST01_L1SYNC_ENABLED
	depends on PORT03_INST01_PROFILE_CUSTOM  
	bool "L1SyncBasicPortDS.L1SyncEnabled"
	default y
	help
	  This parameter specifies whether the L1Sync option is enabled on the PTP Port. If
	  L1SyncEnabled is TRUE, then the L1Sync message exchange is supported and enabled

1102
config PORT03_INST01_L1SYNC_INTERVAL
1103 1104
	depends on PORT03_INST01_PROFILE_HA || (PORT03_INST01_PROFILE_CUSTOM &&  PORT03_INST01_L1SYNC_ENABLED="y") 
	int "L1SyncBasicPortDS.logL1SyncInterval"
1105 1106 1107 1108 1109 1110 1111 1112 1113
	default 0
	range -4 4
	help
	  The L1Sync interval specifies the time interval
	  between successive periodic L1_SYNC TLV.
	  The value is the logarithm to the base 2.
	  The configurable range shall be -4 to 4

config PORT03_INST01_L1SYNC_RECEIPT_TIMEOUT
1114 1115
	depends on PORT03_INST01_PROFILE_HA || (PORT03_INST01_PROFILE_CUSTOM &&  PORT03_INST01_L1SYNC_ENABLED="y") 
	int "L1SyncBasicPortDS.L1SyncReceiptTimeout"
1116 1117 1118 1119 1120 1121 1122 1123 1124
	default 3
	range 2 10
	help
	  The value of L1SyncReceiptTimeout specifies the number of elapsed 
	  L1SyncIntervals that must pass without reception of the L1_SYNC TLV 
	  before the L1_SYNC TLV reception timeout occurs.
	  The value is the logarithm to the base 2.
	  The configurable range shall be 2 to 10

1125 1126 1127 1128 1129 1130 1131 1132 1133 1134 1135 1136 1137 1138 1139 1140 1141 1142 1143 1144 1145 1146 1147 1148 1149 1150 1151 1152 1153 1154 1155 1156 1157 1158 1159
config PORT03_INST01_L1SYNC_TX_COHERENCY_IS_REQUIRED
	depends on PORT03_INST01_PROFILE_CUSTOM &&  PORT03_INST01_L1SYNC_ENABLED="y" 
	bool "L1SyncBasicPortDS.txCoherencyIsRequired"
	default y
	help
	   The Boolean attribute txCoherentIsRequired specifies the configuration of the L1Sync port and the
	   expected configuration of its peer L1Sync port. This configuration indicates whether the L1Sync port is
	   required to be a transmit coherent port.

config PORT03_INST01_L1SYNC_RX_COHERENCY_IS_REQUIRED
	depends on PORT03_INST01_PROFILE_CUSTOM &&  PORT03_INST01_L1SYNC_ENABLED="y" 
	bool "L1SyncBasicPortDS.rxCoherencyIsRequired"
	default y
	help
	  The Boolean attribute rxCoherentIsRequired specifies the configuration of the L1Sync port and the
	  expected configuration of its peer L1Sync port. This configuration indicates whether the L1Sync port is
	  required to be a receive coherent port.

config PORT03_INST01_L1SYNC_CONGRUENCY_IS_REQUIRED
	depends on PORT03_INST01_PROFILE_CUSTOM &&  PORT03_INST01_L1SYNC_ENABLED="y" 
	bool "L1SyncBasicPortDS.congruencyIsRequired"
	default y
	help
	  The Boolean attribute congruentIsRequired specifies configuration of the L1Sync port and the expected
	  configuration of its peer L1Sync port. This configuration indicates whether the L1Sync port is required to
	  be a congruent port

config PORT03_INST01_L1SYNC_OPT_PARAMS_ENABLED
	depends on PORT03_INST01_PROFILE_CUSTOM &&  PORT03_INST01_L1SYNC_ENABLED="y" 
	bool "L1SyncBasicPortDS.optParamsEnabled"
	default n
	help
	  The Boolean attribute optParamsEnabled specifies whether the L1Sync port transmitting the L1_SYNC
	  TLV extends this TLV with the information about the optional parameters.

1160 1161 1162 1163 1164 1165 1166 1167 1168
config PORT03_INST01_L1SYNC_OPT_PARAMS_TS_CORRECTED_TX_ENABLED
	depends on PORT03_INST01_L1SYNC_OPT_PARAMS_ENABLED="y" 
	bool "L1SyncBasicPortDS.timestampsCorrectedTx"
	default n
	help
	  When L1SyncOptParamsPortDS.timestampsCorrectedTx is TRUE, 
	  the L1Sync port shall correct the transmitted egress timestamps with 
	  the known value of the phase offset.

1169 1170 1171 1172 1173
endmenu

menu "Instance 2"
	depends on PORT03_INSTANCE_COUNT_2  

1174 1175 1176 1177 1178 1179 1180 1181 1182 1183 1184 1185 1186 1187 1188 1189 1190 1191 1192 1193 1194 1195 1196 1197 1198 1199
choice
    prompt "Network protocol"
    default PORT03_INST02_PROTOCOL_RAW
    config PORT03_INST02_PROTOCOL_RAW
        bool "IEEE 802.3"
    config PORT03_INST02_PROTOCOL_UDP_IPV4
        bool "UDP/Ipv4"
endchoice

choice
    prompt "Delay mechanism"
    default PORT03_INST02_MECHANISM_E2E
    config PORT03_INST02_MECHANISM_E2E
        bool "End-to-end"
    config PORT03_INST02_MECHANISM_P2P
        bool "Peer-to-peer"
endchoice

config PORT03_INST02_MONITOR
	bool "SNMP monitoring"
	default y
	help
	  Option to disable or enable triggering errors in SNMP on a port

choice
    prompt "Profile"
1200
    default PORT03_INST02_PROFILE_WR
1201 1202 1203
    config PORT03_INST02_PROFILE_PTP
        bool "PTP"
    config PORT03_INST02_PROFILE_WR
Jean-Claude BAU's avatar
Jean-Claude BAU committed
1204
        bool "White Rabbit"
1205 1206 1207
    config PORT03_INST02_PROFILE_CUSTOM
        bool "Custom"
endchoice
1208 1209 1210 1211 1212 1213 1214 1215 1216 1217 1218 1219 1220

choice
    prompt "Desired state"
    depends on PTP_OPT_EXT_PORT_CONFIG_ENABLED
    default PORT03_INST02_DESIRADE_STATE_MASTER
    config PORT03_INST02_DESIRADE_STATE_MASTER
        bool "Master"
    config PORT03_INST02_DESIRADE_STATE_SLAVE
        bool "Slave"
    config PORT03_INST02_DESIRADE_STATE_PASSIVE
        bool "Passive"
endchoice

1221
config PORT03_INST02_ASYMMETRY_CORRECTION_ENABLE
1222
	depends on !PORT03_INST02_PROFILE_HA && !PORT03_INST02_PROFILE_WR
1223
    bool "asymmetryCorrectionPortDS.enable"
1224
    default y
1225 1226 1227 1228
	help
	  When supported, the value TRUE shall indicate that the mechanism of for the calculation
	  of the <delayAsymmetry> for certain media is enabled on the PTP port.

1229 1230 1231 1232 1233 1234 1235 1236 1237 1238 1239
choice
    prompt "BMCA mode"
    depends on PTP_OPT_EXT_PORT_CONFIG_ENABLED!=y
    default PORT03_INST02_BMODE_MASTER_ONLY if TIME_BC
    default PORT03_INST02_BMODE_AUTO
    config PORT03_INST02_BMODE_MASTER_ONLY
        bool "MasterOnly"
    config PORT03_INST02_BMODE_AUTO
        bool "Auto"
endchoice

1240 1241 1242 1243 1244 1245 1246 1247 1248 1249 1250 1251
config PORT03_INST02_EGRESS_LATENCY
    int "timestampCorrectionPortDS.egressLatency (ps)"
    default 224142
 help
	 Defines the transmission constant delay (ps)

config PORT03_INST02_INGRESS_LATENCY
    int "timestampCorrectionPortDS.ingressLatency (ps)"
    default 226638
 help
	 Defines the reception constant delay (ps)

1252
config PORT03_INST02_ANNOUNCE_INTERVAL
1253
	int "logAnnounceInterval" 
1254 1255 1256 1257 1258 1259 1260 1261
	default 1
	range 0 4
	help
	  The mean time interval between transmissions of successive
	  Announce messages. The value is the logarithm to the base 2.
	  The configurable range shall be 0 to 4.

config PORT03_INST02_ANNOUNCE_RECEIPT_TIMEOUT
1262
	int "announceReceiptTimeout"
1263 1264 1265
	default 3
	range 2 255
	help
1266
	  The announceReceiptTimeout specifies the number of announceIntervals 
1267 1268 1269 1270 1271 1272
	  that must pass without receipt of an Announce message before the 
	  occurrence of the event ANNOUNCE_RECEIPT_TIMEOUT_EXPIRES.
	  The value is the logarithm to the base 2.
	  The configurable range shall be 2 to 255

config PORT03_INST02_SYNC_INTERVAL
1273
	int "logSyncInterval"
1274 1275 1276 1277 1278 1279 1280 1281 1282
	default 0
	range -1 1
	help
	  The mean time interval between transmission of successive
	  Sync messages, i.e., the sync-interval, when transmitted
	  as multicast messages. The value is the logarithm to the base 2.
	  The configurable range shall be -1 to +1

config PORT03_INST02_MIN_DELAY_REQ_INTERVAL
1283 1284
	depends on PORT03_INST02_MECHANISM_E2E  
	int "minDelayRequestInterval"
1285 1286 1287
	default 0
	range 0 5
	help
1288
	  The minDelayRequestInterval specifies the minimum permitted
1289 1290 1291 1292 1293
	  mean time interval between successive Delay_Req messages.
	  The value is the logarithm to the base 2.
	  The configurable range shall be 0 to 5

config PORT03_INST02_MIN_PDELAY_REQ_INTERVAL
1294 1295
	depends on PORT03_INST02_MECHANISM_P2P  
	int "minPDelayRequestInterval"
1296 1297 1298
	default 0
	range 0 5
	help
1299
	  The minPDelayRequestInterval specifies the minimum permitted
1300 1301 1302 1303
	  mean time interval between successive Pdelay_Req messages.
	  The value is the logarithm to the base 2.
	  The configurable range shall be 0 to 5

1304 1305 1306 1307 1308 1309 1310 1311
config PORT03_INST02_L1SYNC_ENABLED
	depends on PORT03_INST02_PROFILE_CUSTOM  
	bool "L1SyncBasicPortDS.L1SyncEnabled"
	default y
	help
	  This parameter specifies whether the L1Sync option is enabled on the PTP Port. If
	  L1SyncEnabled is TRUE, then the L1Sync message exchange is supported and enabled

1312
config PORT03_INST02_L1SYNC_INTERVAL
1313 1314
	depends on PORT03_INST02_PROFILE_HA || (PORT03_INST02_PROFILE_CUSTOM &&  PORT03_INST02_L1SYNC_ENABLED="y") 
	int "L1SyncBasicPortDS.logL1SyncInterval"
1315 1316 1317 1318 1319 1320 1321 1322 1323
	default 0
	range -4 4
	help
	  The L1Sync interval specifies the time interval
	  between successive periodic L1_SYNC TLV.
	  The value is the logarithm to the base 2.
	  The configurable range shall be -4 to 4

config PORT03_INST02_L1SYNC_RECEIPT_TIMEOUT
1324 1325
	depends on PORT03_INST02_PROFILE_HA || (PORT03_INST02_PROFILE_CUSTOM &&  PORT03_INST02_L1SYNC_ENABLED="y") 
	int "L1SyncBasicPortDS.L1SyncReceiptTimeout"
1326 1327 1328 1329 1330 1331 1332 1333 1334
	default 3
	range 2 10
	help
	  The value of L1SyncReceiptTimeout specifies the number of elapsed 
	  L1SyncIntervals that must pass without reception of the L1_SYNC TLV 
	  before the L1_SYNC TLV reception timeout occurs.
	  The value is the logarithm to the base 2.
	  The configurable range shall be 2 to 10

1335 1336 1337 1338 1339 1340 1341 1342 1343 1344 1345 1346 1347 1348 1349 1350 1351 1352 1353 1354 1355 1356 1357 1358 1359 1360 1361 1362 1363 1364 1365 1366 1367 1368 1369
config PORT03_INST02_L1SYNC_TX_COHERENCY_IS_REQUIRED
	depends on PORT03_INST02_PROFILE_CUSTOM &&  PORT03_INST02_L1SYNC_ENABLED="y" 
	bool "L1SyncBasicPortDS.txCoherencyIsRequired"
	default y
	help
	   The Boolean attribute txCoherentIsRequired specifies the configuration of the L1Sync port and the
	   expected configuration of its peer L1Sync port. This configuration indicates whether the L1Sync port is
	   required to be a transmit coherent port.

config PORT03_INST02_L1SYNC_RX_COHERENCY_IS_REQUIRED
	depends on PORT03_INST02_PROFILE_CUSTOM &&  PORT03_INST02_L1SYNC_ENABLED="y" 
	bool "L1SyncBasicPortDS.rxCoherencyIsRequired"
	default y
	help
	  The Boolean attribute rxCoherentIsRequired specifies the configuration of the L1Sync port and the
	  expected configuration of its peer L1Sync port. This configuration indicates whether the L1Sync port is
	  required to be a receive coherent port.

config PORT03_INST02_L1SYNC_CONGRUENCY_IS_REQUIRED
	depends on PORT03_INST02_PROFILE_CUSTOM &&  PORT03_INST02_L1SYNC_ENABLED="y" 
	bool "L1SyncBasicPortDS.congruencyIsRequired"
	default y
	help
	  The Boolean attribute congruentIsRequired specifies configuration of the L1Sync port and the expected
	  configuration of its peer L1Sync port. This configuration indicates whether the L1Sync port is required to
	  be a congruent port

config PORT03_INST02_L1SYNC_OPT_PARAMS_ENABLED
	depends on PORT03_INST02_PROFILE_CUSTOM &&  PORT03_INST02_L1SYNC_ENABLED="y" 
	bool "L1SyncBasicPortDS.optParamsEnabled"
	default n
	help
	  The Boolean attribute optParamsEnabled specifies whether the L1Sync port transmitting the L1_SYNC
	  TLV extends this TLV with the information about the optional parameters.

1370 1371 1372 1373 1374 1375 1376 1377 1378
config PORT03_INST02_L1SYNC_OPT_PARAMS_TS_CORRECTED_TX_ENABLED
	depends on PORT03_INST02_L1SYNC_OPT_PARAMS_ENABLED="y" 
	bool "L1SyncBasicPortDS.timestampsCorrectedTx"
	default n
	help
	  When L1SyncOptParamsPortDS.timestampsCorrectedTx is TRUE, 
	  the L1Sync port shall correct the transmitted egress timestamps with 
	  the known value of the phase offset.

1379 1380 1381 1382 1383 1384
endmenu

endmenu

menu "PORT 4"

1385 1386 1387 1388
config PORT04_IFACE
	string "Network interface"
	default "wri4"
	help
1389
	  Used to set the physical port interface name: "wri[1-18]"
1390 1391 1392 1393 1394 1395 1396 1397 1398 1399 1400

config PORT04_FIBER
	int  "Fiber type"
	default 0
	help
	  Used to set the type of fiber (number referring to the corresponding 
	  FIBERXX_PARAMS)

config PORT04_CONSTANT_ASYMMETRY
	int "asymmetryCorrectionPortDS.constantAsymmetry"
	default 0
1401
	help
1402
	   Used to set the constant delay asymmetry.
1403 1404 1405 1406 1407 1408 1409 1410 1411 1412 1413 1414 1415 1416 1417

choice
	prompt "Number of port instances"
	default PORT04_INSTANCE_COUNT_1
	config PORT04_INSTANCE_COUNT_0
	  bool "0"
	config PORT04_INSTANCE_COUNT_1
	  bool "1"
	config PORT04_INSTANCE_COUNT_2
	  bool "2"
endchoice

menu "Instance 1"
	depends on PORT04_INSTANCE_COUNT_1 ||  PORT04_INSTANCE_COUNT_2  

1418 1419 1420 1421 1422 1423 1424 1425 1426 1427 1428 1429 1430 1431 1432 1433 1434 1435 1436 1437 1438 1439 1440 1441 1442 1443
choice
    prompt "Network protocol"
    default PORT04_INST01_PROTOCOL_RAW
    config PORT04_INST01_PROTOCOL_RAW
        bool "IEEE 802.3"
    config PORT04_INST01_PROTOCOL_UDP_IPV4
        bool "UDP/Ipv4"
endchoice

choice
    prompt "Delay mechanism"
    default PORT04_INST01_MECHANISM_E2E
    config PORT04_INST01_MECHANISM_E2E
        bool "End-to-end"
    config PORT04_INST01_MECHANISM_P2P
        bool "Peer-to-peer"
endchoice

config PORT04_INST01_MONITOR
	bool "SNMP monitoring"
	default y
	help
	  Option to disable or enable triggering errors in SNMP on a port

choice
    prompt "Profile"
1444
    default PORT04_INST01_PROFILE_WR
1445 1446 1447
    config PORT04_INST01_PROFILE_PTP
        bool "PTP"
    config PORT04_INST01_PROFILE_WR
Jean-Claude BAU's avatar
Jean-Claude BAU committed
1448
        bool "White Rabbit"
1449 1450 1451
    config PORT04_INST01_PROFILE_CUSTOM
        bool "Custom"
endchoice
1452 1453 1454 1455 1456 1457 1458 1459 1460 1461 1462 1463 1464

choice
    prompt "Desired state"
    depends on PTP_OPT_EXT_PORT_CONFIG_ENABLED
    default PORT04_INST01_DESIRADE_STATE_MASTER
    config PORT04_INST01_DESIRADE_STATE_MASTER
        bool "Master"
    config PORT04_INST01_DESIRADE_STATE_SLAVE
        bool "Slave"
    config PORT04_INST01_DESIRADE_STATE_PASSIVE
        bool "Passive"
endchoice

1465
config PORT04_INST01_ASYMMETRY_CORRECTION_ENABLE
1466
	depends on !PORT04_INST01_PROFILE_HA && !PORT04_INST01_PROFILE_WR
1467
    bool "asymmetryCorrectionPortDS.enable"
1468
    default y
1469 1470 1471 1472
	help
	  When supported, the value TRUE shall indicate that the mechanism of for the calculation
	  of the <delayAsymmetry> for certain media is enabled on the PTP port.

1473 1474 1475 1476 1477 1478 1479 1480 1481 1482 1483
choice
    prompt "BMCA mode"
    depends on PTP_OPT_EXT_PORT_CONFIG_ENABLED!=y
    default PORT04_INST01_BMODE_MASTER_ONLY if TIME_BC
    default PORT04_INST01_BMODE_AUTO
    config PORT04_INST01_BMODE_MASTER_ONLY
        bool "MasterOnly"
    config PORT04_INST01_BMODE_AUTO
        bool "Auto"
endchoice

1484 1485 1486 1487 1488 1489 1490 1491 1492 1493 1494 1495
config PORT04_INST01_EGRESS_LATENCY
    int "timestampCorrectionPortDS.egressLatency (ps)"
    default 224313
 help
	 Defines the transmission constant delay (ps)

config PORT04_INST01_INGRESS_LATENCY
    int "timestampCorrectionPortDS.ingressLatency (ps)"
    default 226471
 help
	 Defines the reception constant delay (ps)

1496
config PORT04_INST01_ANNOUNCE_INTERVAL
1497
	int "logAnnounceInterval" 
1498 1499 1500 1501 1502 1503 1504 1505
	default 1
	range 0 4
	help
	  The mean time interval between transmissions of successive
	  Announce messages. The value is the logarithm to the base 2.
	  The configurable range shall be 0 to 4.

config PORT04_INST01_ANNOUNCE_RECEIPT_TIMEOUT
1506
	int "announceReceiptTimeout"
1507 1508 1509
	default 3
	range 2 255
	help
1510
	  The announceReceiptTimeout specifies the number of announceIntervals 
1511 1512 1513 1514 1515 1516
	  that must pass without receipt of an Announce message before the 
	  occurrence of the event ANNOUNCE_RECEIPT_TIMEOUT_EXPIRES.
	  The value is the logarithm to the base 2.
	  The configurable range shall be 2 to 255

config PORT04_INST01_SYNC_INTERVAL
1517
	int "logSyncInterval"
1518 1519 1520 1521 1522 1523 1524 1525 1526
	default 0
	range -1 1
	help
	  The mean time interval between transmission of successive
	  Sync messages, i.e., the sync-interval, when transmitted
	  as multicast messages. The value is the logarithm to the base 2.
	  The configurable range shall be -1 to +1

config PORT04_INST01_MIN_DELAY_REQ_INTERVAL
1527 1528
	depends on PORT04_INST01_MECHANISM_E2E  
	int "minDelayRequestInterval"
1529 1530 1531
	default 0
	range 0 5
	help
1532
	  The minDelayRequestInterval specifies the minimum permitted
1533 1534 1535 1536 1537
	  mean time interval between successive Delay_Req messages.
	  The value is the logarithm to the base 2.
	  The configurable range shall be 0 to 5

config PORT04_INST01_MIN_PDELAY_REQ_INTERVAL
1538 1539
	depends on PORT04_INST01_MECHANISM_P2P  
	int "minPDelayRequestInterval"
1540 1541 1542
	default 0
	range 0 5
	help
1543
	  The minPDelayRequestInterval specifies the minimum permitted
1544 1545 1546 1547
	  mean time interval between successive Pdelay_Req messages.
	  The value is the logarithm to the base 2.
	  The configurable range shall be 0 to 5

1548 1549 1550 1551 1552 1553 1554 1555
config PORT04_INST01_L1SYNC_ENABLED
	depends on PORT04_INST01_PROFILE_CUSTOM  
	bool "L1SyncBasicPortDS.L1SyncEnabled"
	default y
	help
	  This parameter specifies whether the L1Sync option is enabled on the PTP Port. If
	  L1SyncEnabled is TRUE, then the L1Sync message exchange is supported and enabled

1556
config PORT04_INST01_L1SYNC_INTERVAL
1557 1558
	depends on PORT04_INST01_PROFILE_HA || (PORT04_INST01_PROFILE_CUSTOM &&  PORT04_INST01_L1SYNC_ENABLED="y") 
	int "L1SyncBasicPortDS.logL1SyncInterval"
1559 1560 1561 1562 1563 1564 1565 1566 1567
	default 0
	range -4 4
	help
	  The L1Sync interval specifies the time interval
	  between successive periodic L1_SYNC TLV.
	  The value is the logarithm to the base 2.
	  The configurable range shall be -4 to 4

config PORT04_INST01_L1SYNC_RECEIPT_TIMEOUT
1568 1569
	depends on PORT04_INST01_PROFILE_HA || (PORT04_INST01_PROFILE_CUSTOM &&  PORT04_INST01_L1SYNC_ENABLED="y") 
	int "L1SyncBasicPortDS.L1SyncReceiptTimeout"
1570 1571 1572 1573 1574 1575 1576 1577 1578
	default 3
	range 2 10
	help
	  The value of L1SyncReceiptTimeout specifies the number of elapsed 
	  L1SyncIntervals that must pass without reception of the L1_SYNC TLV 
	  before the L1_SYNC TLV reception timeout occurs.
	  The value is the logarithm to the base 2.
	  The configurable range shall be 2 to 10

1579 1580 1581 1582 1583 1584 1585 1586 1587 1588 1589 1590 1591 1592 1593 1594 1595 1596 1597 1598 1599 1600 1601 1602 1603 1604 1605 1606 1607 1608 1609 1610 1611 1612 1613
config PORT04_INST01_L1SYNC_TX_COHERENCY_IS_REQUIRED
	depends on PORT04_INST01_PROFILE_CUSTOM &&  PORT04_INST01_L1SYNC_ENABLED="y" 
	bool "L1SyncBasicPortDS.txCoherencyIsRequired"
	default y
	help
	   The Boolean attribute txCoherentIsRequired specifies the configuration of the L1Sync port and the
	   expected configuration of its peer L1Sync port. This configuration indicates whether the L1Sync port is
	   required to be a transmit coherent port.

config PORT04_INST01_L1SYNC_RX_COHERENCY_IS_REQUIRED
	depends on PORT04_INST01_PROFILE_CUSTOM &&  PORT04_INST01_L1SYNC_ENABLED="y" 
	bool "L1SyncBasicPortDS.rxCoherencyIsRequired"
	default y
	help
	  The Boolean attribute rxCoherentIsRequired specifies the configuration of the L1Sync port and the
	  expected configuration of its peer L1Sync port. This configuration indicates whether the L1Sync port is
	  required to be a receive coherent port.

config PORT04_INST01_L1SYNC_CONGRUENCY_IS_REQUIRED
	depends on PORT04_INST01_PROFILE_CUSTOM &&  PORT04_INST01_L1SYNC_ENABLED="y" 
	bool "L1SyncBasicPortDS.congruencyIsRequired"
	default y
	help
	  The Boolean attribute congruentIsRequired specifies configuration of the L1Sync port and the expected
	  configuration of its peer L1Sync port. This configuration indicates whether the L1Sync port is required to
	  be a congruent port

config PORT04_INST01_L1SYNC_OPT_PARAMS_ENABLED
	depends on PORT04_INST01_PROFILE_CUSTOM &&  PORT04_INST01_L1SYNC_ENABLED="y" 
	bool "L1SyncBasicPortDS.optParamsEnabled"
	default n
	help
	  The Boolean attribute optParamsEnabled specifies whether the L1Sync port transmitting the L1_SYNC
	  TLV extends this TLV with the information about the optional parameters.

1614 1615 1616 1617 1618 1619 1620 1621 1622
config PORT04_INST01_L1SYNC_OPT_PARAMS_TS_CORRECTED_TX_ENABLED
	depends on PORT04_INST01_L1SYNC_OPT_PARAMS_ENABLED="y" 
	bool "L1SyncBasicPortDS.timestampsCorrectedTx"
	default n
	help
	  When L1SyncOptParamsPortDS.timestampsCorrectedTx is TRUE, 
	  the L1Sync port shall correct the transmitted egress timestamps with 
	  the known value of the phase offset.

1623 1624 1625 1626 1627
endmenu

menu "Instance 2"
	depends on PORT04_INSTANCE_COUNT_2  

1628 1629 1630 1631 1632 1633 1634 1635 1636 1637 1638 1639 1640 1641 1642 1643 1644 1645 1646 1647 1648 1649 1650 1651 1652 1653
choice
    prompt "Network protocol"
    default PORT04_INST02_PROTOCOL_RAW
    config PORT04_INST02_PROTOCOL_RAW
        bool "IEEE 802.3"
    config PORT04_INST02_PROTOCOL_UDP_IPV4
        bool "UDP/Ipv4"
endchoice

choice
    prompt "Delay mechanism"
    default PORT04_INST02_MECHANISM_E2E
    config PORT04_INST02_MECHANISM_E2E
        bool "End-to-end"
    config PORT04_INST02_MECHANISM_P2P
        bool "Peer-to-peer"
endchoice

config PORT04_INST02_MONITOR
	bool "SNMP monitoring"
	default y
	help
	  Option to disable or enable triggering errors in SNMP on a port

choice
    prompt "Profile"
1654
    default PORT04_INST02_PROFILE_WR
1655 1656 1657
    config PORT04_INST02_PROFILE_PTP
        bool "PTP"
    config PORT04_INST02_PROFILE_WR
Jean-Claude BAU's avatar
Jean-Claude BAU committed
1658
        bool "White Rabbit"
1659 1660 1661
    config PORT04_INST02_PROFILE_CUSTOM
        bool "Custom"
endchoice
1662 1663 1664 1665 1666 1667 1668 1669 1670 1671 1672 1673 1674

choice
    prompt "Desired state"
    depends on PTP_OPT_EXT_PORT_CONFIG_ENABLED
    default PORT04_INST02_DESIRADE_STATE_MASTER
    config PORT04_INST02_DESIRADE_STATE_MASTER
        bool "Master"
    config PORT04_INST02_DESIRADE_STATE_SLAVE
        bool "Slave"
    config PORT04_INST02_DESIRADE_STATE_PASSIVE
        bool "Passive"
endchoice

1675
config PORT04_INST02_ASYMMETRY_CORRECTION_ENABLE
1676
	depends on !PORT04_INST02_PROFILE_HA && !PORT04_INST02_PROFILE_WR
1677
    bool "asymmetryCorrectionPortDS.enable"
1678
    default y
1679 1680 1681 1682
	help
	  When supported, the value TRUE shall indicate that the mechanism of for the calculation
	  of the <delayAsymmetry> for certain media is enabled on the PTP port.

1683 1684 1685 1686 1687 1688 1689 1690 1691 1692 1693
choice
    prompt "BMCA mode"
    depends on PTP_OPT_EXT_PORT_CONFIG_ENABLED!=y
    default PORT04_INST02_BMODE_MASTER_ONLY if TIME_BC
    default PORT04_INST02_BMODE_AUTO
    config PORT04_INST02_BMODE_MASTER_ONLY
        bool "MasterOnly"
    config PORT04_INST02_BMODE_AUTO
        bool "Auto"
endchoice

1694 1695 1696 1697 1698 1699 1700 1701 1702 1703 1704 1705
config PORT04_INST02_EGRESS_LATENCY
    int "timestampCorrectionPortDS.egressLatency (ps)"
    default 224313
 help
	 Defines the transmission constant delay (ps)

config PORT04_INST02_INGRESS_LATENCY
    int "timestampCorrectionPortDS.ingressLatency (ps)"
    default 226471
 help
	 Defines the reception constant delay (ps)

1706
config PORT04_INST02_ANNOUNCE_INTERVAL
1707
	int "logAnnounceInterval" 
1708 1709 1710 1711 1712 1713 1714 1715
	default 1
	range 0 4
	help
	  The mean time interval between transmissions of successive
	  Announce messages. The value is the logarithm to the base 2.
	  The configurable range shall be 0 to 4.

config PORT04_INST02_ANNOUNCE_RECEIPT_TIMEOUT
1716
	int "announceReceiptTimeout"
1717 1718 1719
	default 3
	range 2 255
	help
1720
	  The announceReceiptTimeout specifies the number of announceIntervals 
1721 1722 1723 1724 1725 1726
	  that must pass without receipt of an Announce message before the 
	  occurrence of the event ANNOUNCE_RECEIPT_TIMEOUT_EXPIRES.
	  The value is the logarithm to the base 2.
	  The configurable range shall be 2 to 255

config PORT04_INST02_SYNC_INTERVAL
1727
	int "logSyncInterval"
1728 1729 1730 1731 1732 1733 1734 1735 1736
	default 0
	range -1 1
	help
	  The mean time interval between transmission of successive
	  Sync messages, i.e., the sync-interval, when transmitted
	  as multicast messages. The value is the logarithm to the base 2.
	  The configurable range shall be -1 to +1

config PORT04_INST02_MIN_DELAY_REQ_INTERVAL
1737 1738
	depends on PORT04_INST02_MECHANISM_E2E  
	int "minDelayRequestInterval"
1739 1740 1741
	default 0
	range 0 5
	help
1742
	  The minDelayRequestInterval specifies the minimum permitted
1743 1744 1745 1746 1747
	  mean time interval between successive Delay_Req messages.
	  The value is the logarithm to the base 2.
	  The configurable range shall be 0 to 5

config PORT04_INST02_MIN_PDELAY_REQ_INTERVAL
1748 1749
	depends on PORT04_INST02_MECHANISM_P2P  
	int "minPDelayRequestInterval"
1750 1751 1752
	default 0
	range 0 5
	help
1753
	  The minPDelayRequestInterval specifies the minimum permitted
1754 1755 1756 1757
	  mean time interval between successive Pdelay_Req messages.
	  The value is the logarithm to the base 2.
	  The configurable range shall be 0 to 5

1758 1759 1760 1761 1762 1763 1764 1765
config PORT04_INST02_L1SYNC_ENABLED
	depends on PORT04_INST02_PROFILE_CUSTOM  
	bool "L1SyncBasicPortDS.L1SyncEnabled"
	default y
	help
	  This parameter specifies whether the L1Sync option is enabled on the PTP Port. If
	  L1SyncEnabled is TRUE, then the L1Sync message exchange is supported and enabled

1766
config PORT04_INST02_L1SYNC_INTERVAL
1767 1768
	depends on PORT04_INST02_PROFILE_HA || (PORT04_INST02_PROFILE_CUSTOM &&  PORT04_INST02_L1SYNC_ENABLED="y") 
	int "L1SyncBasicPortDS.logL1SyncInterval"
1769 1770 1771 1772 1773 1774 1775 1776 1777
	default 0
	range -4 4
	help
	  The L1Sync interval specifies the time interval
	  between successive periodic L1_SYNC TLV.
	  The value is the logarithm to the base 2.
	  The configurable range shall be -4 to 4

config PORT04_INST02_L1SYNC_RECEIPT_TIMEOUT
1778 1779
	depends on PORT04_INST02_PROFILE_HA || (PORT04_INST02_PROFILE_CUSTOM &&  PORT04_INST02_L1SYNC_ENABLED="y") 
	int "L1SyncBasicPortDS.L1SyncReceiptTimeout"
1780 1781 1782 1783 1784 1785 1786 1787 1788
	default 3
	range 2 10
	help
	  The value of L1SyncReceiptTimeout specifies the number of elapsed 
	  L1SyncIntervals that must pass without reception of the L1_SYNC TLV 
	  before the L1_SYNC TLV reception timeout occurs.
	  The value is the logarithm to the base 2.
	  The configurable range shall be 2 to 10

1789 1790 1791 1792 1793 1794 1795 1796 1797 1798 1799 1800 1801 1802 1803 1804 1805 1806 1807 1808 1809 1810 1811 1812 1813 1814 1815 1816 1817 1818 1819 1820 1821 1822 1823
config PORT04_INST02_L1SYNC_TX_COHERENCY_IS_REQUIRED
	depends on PORT04_INST02_PROFILE_CUSTOM &&  PORT04_INST02_L1SYNC_ENABLED="y" 
	bool "L1SyncBasicPortDS.txCoherencyIsRequired"
	default y
	help
	   The Boolean attribute txCoherentIsRequired specifies the configuration of the L1Sync port and the
	   expected configuration of its peer L1Sync port. This configuration indicates whether the L1Sync port is
	   required to be a transmit coherent port.

config PORT04_INST02_L1SYNC_RX_COHERENCY_IS_REQUIRED
	depends on PORT04_INST02_PROFILE_CUSTOM &&  PORT04_INST02_L1SYNC_ENABLED="y" 
	bool "L1SyncBasicPortDS.rxCoherencyIsRequired"
	default y
	help
	  The Boolean attribute rxCoherentIsRequired specifies the configuration of the L1Sync port and the
	  expected configuration of its peer L1Sync port. This configuration indicates whether the L1Sync port is
	  required to be a receive coherent port.

config PORT04_INST02_L1SYNC_CONGRUENCY_IS_REQUIRED
	depends on PORT04_INST02_PROFILE_CUSTOM &&  PORT04_INST02_L1SYNC_ENABLED="y" 
	bool "L1SyncBasicPortDS.congruencyIsRequired"
	default y
	help
	  The Boolean attribute congruentIsRequired specifies configuration of the L1Sync port and the expected
	  configuration of its peer L1Sync port. This configuration indicates whether the L1Sync port is required to
	  be a congruent port

config PORT04_INST02_L1SYNC_OPT_PARAMS_ENABLED
	depends on PORT04_INST02_PROFILE_CUSTOM &&  PORT04_INST02_L1SYNC_ENABLED="y" 
	bool "L1SyncBasicPortDS.optParamsEnabled"
	default n
	help
	  The Boolean attribute optParamsEnabled specifies whether the L1Sync port transmitting the L1_SYNC
	  TLV extends this TLV with the information about the optional parameters.

1824 1825 1826 1827 1828 1829 1830 1831 1832
config PORT04_INST02_L1SYNC_OPT_PARAMS_TS_CORRECTED_TX_ENABLED
	depends on PORT04_INST02_L1SYNC_OPT_PARAMS_ENABLED="y" 
	bool "L1SyncBasicPortDS.timestampsCorrectedTx"
	default n
	help
	  When L1SyncOptParamsPortDS.timestampsCorrectedTx is TRUE, 
	  the L1Sync port shall correct the transmitted egress timestamps with 
	  the known value of the phase offset.

1833 1834 1835 1836 1837 1838
endmenu

endmenu

menu "PORT 5"

1839 1840 1841
config PORT05_IFACE
	string "Network interface"
	default "wri5"
1842
	help
1843
	  Used to set the physical port interface name: "wri[1-18]"
1844 1845 1846 1847 1848 1849 1850 1851 1852 1853 1854 1855 1856

config PORT05_FIBER
	int  "Fiber type"
	default 0
	help
	  Used to set the type of fiber (number referring to the corresponding 
	  FIBERXX_PARAMS)

config PORT05_CONSTANT_ASYMMETRY
	int "asymmetryCorrectionPortDS.constantAsymmetry"
	default 0
	help
	   Used to set the constant delay asymmetry.
1857 1858 1859 1860 1861 1862 1863 1864 1865 1866 1867 1868 1869 1870 1871

choice
	prompt "Number of port instances"
	default PORT05_INSTANCE_COUNT_1
	config PORT05_INSTANCE_COUNT_0
	  bool "0"
	config PORT05_INSTANCE_COUNT_1
	  bool "1"
	config PORT05_INSTANCE_COUNT_2
	  bool "2"
endchoice

menu "Instance 1"
	depends on PORT05_INSTANCE_COUNT_1 ||  PORT05_INSTANCE_COUNT_2  

1872 1873 1874 1875 1876 1877 1878 1879 1880 1881 1882 1883 1884 1885 1886 1887 1888 1889 1890 1891 1892 1893 1894 1895 1896 1897
choice
    prompt "Network protocol"
    default PORT05_INST01_PROTOCOL_RAW
    config PORT05_INST01_PROTOCOL_RAW
        bool "IEEE 802.3"
    config PORT05_INST01_PROTOCOL_UDP_IPV4
        bool "UDP/Ipv4"
endchoice

choice
    prompt "Delay mechanism"
    default PORT05_INST01_MECHANISM_E2E
    config PORT05_INST01_MECHANISM_E2E
        bool "End-to-end"
    config PORT05_INST01_MECHANISM_P2P
        bool "Peer-to-peer"
endchoice

config PORT05_INST01_MONITOR
	bool "SNMP monitoring"
	default y
	help
	  Option to disable or enable triggering errors in SNMP on a port

choice
    prompt "Profile"
1898
    default PORT05_INST01_PROFILE_WR
1899 1900 1901
    config PORT05_INST01_PROFILE_PTP
        bool "PTP"
    config PORT05_INST01_PROFILE_WR
Jean-Claude BAU's avatar
Jean-Claude BAU committed
1902
        bool "White Rabbit"
1903 1904 1905
    config PORT05_INST01_PROFILE_CUSTOM
        bool "Custom"
endchoice
1906 1907 1908 1909 1910 1911 1912 1913 1914 1915 1916 1917 1918

choice
    prompt "Desired state"
    depends on PTP_OPT_EXT_PORT_CONFIG_ENABLED
    default PORT05_INST01_DESIRADE_STATE_MASTER
    config PORT05_INST01_DESIRADE_STATE_MASTER
        bool "Master"
    config PORT05_INST01_DESIRADE_STATE_SLAVE
        bool "Slave"
    config PORT05_INST01_DESIRADE_STATE_PASSIVE
        bool "Passive"
endchoice

1919
config PORT05_INST01_ASYMMETRY_CORRECTION_ENABLE
1920
	depends on !PORT05_INST01_PROFILE_HA && !PORT05_INST01_PROFILE_WR
1921
    bool "asymmetryCorrectionPortDS.enable"
1922
    default y
1923 1924 1925 1926
	help
	  When supported, the value TRUE shall indicate that the mechanism of for the calculation
	  of the <delayAsymmetry> for certain media is enabled on the PTP port.

1927 1928 1929 1930 1931 1932 1933 1934 1935 1936 1937
choice
    prompt "BMCA mode"
    depends on PTP_OPT_EXT_PORT_CONFIG_ENABLED!=y
    default PORT05_INST01_BMODE_MASTER_ONLY if TIME_BC
    default PORT05_INST01_BMODE_AUTO
    config PORT05_INST01_BMODE_MASTER_ONLY
        bool "MasterOnly"
    config PORT05_INST01_BMODE_AUTO
        bool "Auto"
endchoice

1938 1939 1940 1941 1942 1943 1944 1945 1946 1947 1948 1949
config PORT05_INST01_EGRESS_LATENCY
    int "timestampCorrectionPortDS.egressLatency (ps)"
    default 224455
 help
	 Defines the transmission constant delay (ps)

config PORT05_INST01_INGRESS_LATENCY
    int "timestampCorrectionPortDS.ingressLatency (ps)"
    default 227679
 help
	 Defines the reception constant delay (ps)

1950
config PORT05_INST01_ANNOUNCE_INTERVAL
1951
	int "logAnnounceInterval" 
1952 1953 1954 1955 1956 1957 1958 1959
	default 1
	range 0 4
	help
	  The mean time interval between transmissions of successive
	  Announce messages. The value is the logarithm to the base 2.
	  The configurable range shall be 0 to 4.

config PORT05_INST01_ANNOUNCE_RECEIPT_TIMEOUT
1960
	int "announceReceiptTimeout"
1961 1962 1963
	default 3
	range 2 255
	help
1964
	  The announceReceiptTimeout specifies the number of announceIntervals 
1965 1966 1967 1968 1969 1970
	  that must pass without receipt of an Announce message before the 
	  occurrence of the event ANNOUNCE_RECEIPT_TIMEOUT_EXPIRES.
	  The value is the logarithm to the base 2.
	  The configurable range shall be 2 to 255

config PORT05_INST01_SYNC_INTERVAL
1971
	int "logSyncInterval"
1972 1973 1974 1975 1976 1977 1978 1979 1980
	default 0
	range -1 1
	help
	  The mean time interval between transmission of successive
	  Sync messages, i.e., the sync-interval, when transmitted
	  as multicast messages. The value is the logarithm to the base 2.
	  The configurable range shall be -1 to +1

config PORT05_INST01_MIN_DELAY_REQ_INTERVAL
1981 1982
	depends on PORT05_INST01_MECHANISM_E2E  
	int "minDelayRequestInterval"
1983 1984 1985
	default 0
	range 0 5
	help
1986
	  The minDelayRequestInterval specifies the minimum permitted
1987 1988 1989 1990 1991
	  mean time interval between successive Delay_Req messages.
	  The value is the logarithm to the base 2.
	  The configurable range shall be 0 to 5

config PORT05_INST01_MIN_PDELAY_REQ_INTERVAL
1992 1993
	depends on PORT05_INST01_MECHANISM_P2P  
	int "minPDelayRequestInterval"
1994 1995 1996
	default 0
	range 0 5
	help
1997
	  The minPDelayRequestInterval specifies the minimum permitted
1998 1999 2000 2001
	  mean time interval between successive Pdelay_Req messages.
	  The value is the logarithm to the base 2.
	  The configurable range shall be 0 to 5

2002 2003 2004 2005 2006 2007 2008 2009
config PORT05_INST01_L1SYNC_ENABLED
	depends on PORT05_INST01_PROFILE_CUSTOM  
	bool "L1SyncBasicPortDS.L1SyncEnabled"
	default y
	help
	  This parameter specifies whether the L1Sync option is enabled on the PTP Port. If
	  L1SyncEnabled is TRUE, then the L1Sync message exchange is supported and enabled

2010
config PORT05_INST01_L1SYNC_INTERVAL
2011 2012
	depends on PORT05_INST01_PROFILE_HA || (PORT05_INST01_PROFILE_CUSTOM &&  PORT05_INST01_L1SYNC_ENABLED="y") 
	int "L1SyncBasicPortDS.logL1SyncInterval"
2013 2014 2015 2016 2017 2018 2019 2020 2021
	default 0
	range -4 4
	help
	  The L1Sync interval specifies the time interval
	  between successive periodic L1_SYNC TLV.
	  The value is the logarithm to the base 2.
	  The configurable range shall be -4 to 4

config PORT05_INST01_L1SYNC_RECEIPT_TIMEOUT
2022 2023
	depends on PORT05_INST01_PROFILE_HA || (PORT05_INST01_PROFILE_CUSTOM &&  PORT05_INST01_L1SYNC_ENABLED="y") 
	int "L1SyncBasicPortDS.L1SyncReceiptTimeout"
2024 2025 2026 2027 2028 2029 2030 2031 2032
	default 3
	range 2 10
	help
	  The value of L1SyncReceiptTimeout specifies the number of elapsed 
	  L1SyncIntervals that must pass without reception of the L1_SYNC TLV 
	  before the L1_SYNC TLV reception timeout occurs.
	  The value is the logarithm to the base 2.
	  The configurable range shall be 2 to 10

2033 2034 2035 2036 2037 2038 2039 2040 2041 2042 2043 2044 2045 2046 2047 2048 2049 2050 2051 2052 2053 2054 2055 2056 2057 2058 2059 2060 2061 2062 2063 2064 2065 2066 2067
config PORT05_INST01_L1SYNC_TX_COHERENCY_IS_REQUIRED
	depends on PORT05_INST01_PROFILE_CUSTOM &&  PORT05_INST01_L1SYNC_ENABLED="y" 
	bool "L1SyncBasicPortDS.txCoherencyIsRequired"
	default y
	help
	   The Boolean attribute txCoherentIsRequired specifies the configuration of the L1Sync port and the
	   expected configuration of its peer L1Sync port. This configuration indicates whether the L1Sync port is
	   required to be a transmit coherent port.

config PORT05_INST01_L1SYNC_RX_COHERENCY_IS_REQUIRED
	depends on PORT05_INST01_PROFILE_CUSTOM &&  PORT05_INST01_L1SYNC_ENABLED="y" 
	bool "L1SyncBasicPortDS.rxCoherencyIsRequired"
	default y
	help
	  The Boolean attribute rxCoherentIsRequired specifies the configuration of the L1Sync port and the
	  expected configuration of its peer L1Sync port. This configuration indicates whether the L1Sync port is
	  required to be a receive coherent port.

config PORT05_INST01_L1SYNC_CONGRUENCY_IS_REQUIRED
	depends on PORT05_INST01_PROFILE_CUSTOM &&  PORT05_INST01_L1SYNC_ENABLED="y" 
	bool "L1SyncBasicPortDS.congruencyIsRequired"
	default y
	help
	  The Boolean attribute congruentIsRequired specifies configuration of the L1Sync port and the expected
	  configuration of its peer L1Sync port. This configuration indicates whether the L1Sync port is required to
	  be a congruent port

config PORT05_INST01_L1SYNC_OPT_PARAMS_ENABLED
	depends on PORT05_INST01_PROFILE_CUSTOM &&  PORT05_INST01_L1SYNC_ENABLED="y" 
	bool "L1SyncBasicPortDS.optParamsEnabled"
	default n
	help
	  The Boolean attribute optParamsEnabled specifies whether the L1Sync port transmitting the L1_SYNC
	  TLV extends this TLV with the information about the optional parameters.

2068 2069 2070 2071 2072 2073 2074 2075 2076
config PORT05_INST01_L1SYNC_OPT_PARAMS_TS_CORRECTED_TX_ENABLED
	depends on PORT05_INST01_L1SYNC_OPT_PARAMS_ENABLED="y" 
	bool "L1SyncBasicPortDS.timestampsCorrectedTx"
	default n
	help
	  When L1SyncOptParamsPortDS.timestampsCorrectedTx is TRUE, 
	  the L1Sync port shall correct the transmitted egress timestamps with 
	  the known value of the phase offset.

2077 2078 2079 2080 2081
endmenu

menu "Instance 2"
	depends on PORT05_INSTANCE_COUNT_2  

2082 2083 2084 2085 2086 2087 2088 2089 2090 2091 2092 2093 2094 2095 2096 2097 2098 2099 2100 2101 2102 2103 2104 2105 2106 2107
choice
    prompt "Network protocol"
    default PORT05_INST02_PROTOCOL_RAW
    config PORT05_INST02_PROTOCOL_RAW
        bool "IEEE 802.3"
    config PORT05_INST02_PROTOCOL_UDP_IPV4
        bool "UDP/Ipv4"
endchoice

choice
    prompt "Delay mechanism"
    default PORT05_INST02_MECHANISM_E2E
    config PORT05_INST02_MECHANISM_E2E
        bool "End-to-end"
    config PORT05_INST02_MECHANISM_P2P
        bool "Peer-to-peer"
endchoice

config PORT05_INST02_MONITOR
	bool "SNMP monitoring"
	default y
	help
	  Option to disable or enable triggering errors in SNMP on a port

choice
    prompt "Profile"
2108
    default PORT05_INST02_PROFILE_WR
2109 2110 2111
    config PORT05_INST02_PROFILE_PTP
        bool "PTP"
    config PORT05_INST02_PROFILE_WR
Jean-Claude BAU's avatar
Jean-Claude BAU committed
2112
        bool "White Rabbit"
2113 2114 2115
    config PORT05_INST02_PROFILE_CUSTOM
        bool "Custom"
endchoice
2116 2117 2118 2119 2120 2121 2122 2123 2124 2125 2126 2127 2128

choice
    prompt "Desired state"
    depends on PTP_OPT_EXT_PORT_CONFIG_ENABLED
    default PORT05_INST02_DESIRADE_STATE_MASTER
    config PORT05_INST02_DESIRADE_STATE_MASTER
        bool "Master"
    config PORT05_INST02_DESIRADE_STATE_SLAVE
        bool "Slave"
    config PORT05_INST02_DESIRADE_STATE_PASSIVE
        bool "Passive"
endchoice

2129
config PORT05_INST02_ASYMMETRY_CORRECTION_ENABLE
2130
	depends on !PORT05_INST02_PROFILE_HA && !PORT05_INST02_PROFILE_WR
2131
    bool "asymmetryCorrectionPortDS.enable"
2132
    default y
2133 2134 2135 2136
	help
	  When supported, the value TRUE shall indicate that the mechanism of for the calculation
	  of the <delayAsymmetry> for certain media is enabled on the PTP port.

2137 2138 2139 2140 2141 2142 2143 2144 2145 2146 2147
choice
    prompt "BMCA mode"
    depends on PTP_OPT_EXT_PORT_CONFIG_ENABLED!=y
    default PORT05_INST02_BMODE_MASTER_ONLY if TIME_BC
    default PORT05_INST02_BMODE_AUTO
    config PORT05_INST02_BMODE_MASTER_ONLY
        bool "MasterOnly"
    config PORT05_INST02_BMODE_AUTO
        bool "Auto"
endchoice

2148 2149 2150 2151 2152 2153 2154 2155 2156 2157 2158 2159
config PORT05_INST02_EGRESS_LATENCY
    int "timestampCorrectionPortDS.egressLatency (ps)"
    default 224455
 help
	 Defines the transmission constant delay (ps)

config PORT05_INST02_INGRESS_LATENCY
    int "timestampCorrectionPortDS.ingressLatency (ps)"
    default 227679
 help
	 Defines the reception constant delay (ps)

2160
config PORT05_INST02_ANNOUNCE_INTERVAL
2161
	int "logAnnounceInterval" 
2162 2163 2164 2165 2166 2167 2168 2169
	default 1
	range 0 4
	help
	  The mean time interval between transmissions of successive
	  Announce messages. The value is the logarithm to the base 2.
	  The configurable range shall be 0 to 4.

config PORT05_INST02_ANNOUNCE_RECEIPT_TIMEOUT
2170
	int "announceReceiptTimeout"
2171 2172 2173
	default 3
	range 2 255
	help
2174
	  The announceReceiptTimeout specifies the number of announceIntervals 
2175 2176 2177 2178 2179 2180
	  that must pass without receipt of an Announce message before the 
	  occurrence of the event ANNOUNCE_RECEIPT_TIMEOUT_EXPIRES.
	  The value is the logarithm to the base 2.
	  The configurable range shall be 2 to 255

config PORT05_INST02_SYNC_INTERVAL
2181
	int "logSyncInterval"
2182 2183 2184 2185 2186 2187 2188 2189 2190
	default 0
	range -1 1
	help
	  The mean time interval between transmission of successive
	  Sync messages, i.e., the sync-interval, when transmitted
	  as multicast messages. The value is the logarithm to the base 2.
	  The configurable range shall be -1 to +1

config PORT05_INST02_MIN_DELAY_REQ_INTERVAL
2191 2192
	depends on PORT05_INST02_MECHANISM_E2E  
	int "minDelayRequestInterval"
2193 2194 2195
	default 0
	range 0 5
	help
2196
	  The minDelayRequestInterval specifies the minimum permitted
2197 2198 2199 2200 2201
	  mean time interval between successive Delay_Req messages.
	  The value is the logarithm to the base 2.
	  The configurable range shall be 0 to 5

config PORT05_INST02_MIN_PDELAY_REQ_INTERVAL
2202 2203
	depends on PORT05_INST02_MECHANISM_P2P  
	int "minPDelayRequestInterval"
2204 2205 2206
	default 0
	range 0 5
	help
2207
	  The minPDelayRequestInterval specifies the minimum permitted
2208 2209 2210 2211
	  mean time interval between successive Pdelay_Req messages.
	  The value is the logarithm to the base 2.
	  The configurable range shall be 0 to 5

2212 2213 2214 2215 2216 2217 2218 2219
config PORT05_INST02_L1SYNC_ENABLED
	depends on PORT05_INST02_PROFILE_CUSTOM  
	bool "L1SyncBasicPortDS.L1SyncEnabled"
	default y
	help
	  This parameter specifies whether the L1Sync option is enabled on the PTP Port. If
	  L1SyncEnabled is TRUE, then the L1Sync message exchange is supported and enabled

2220
config PORT05_INST02_L1SYNC_INTERVAL
2221 2222
	depends on PORT05_INST02_PROFILE_HA || (PORT05_INST02_PROFILE_CUSTOM &&  PORT05_INST02_L1SYNC_ENABLED="y") 
	int "L1SyncBasicPortDS.logL1SyncInterval"
2223 2224 2225 2226 2227 2228 2229 2230 2231
	default 0
	range -4 4
	help
	  The L1Sync interval specifies the time interval
	  between successive periodic L1_SYNC TLV.
	  The value is the logarithm to the base 2.
	  The configurable range shall be -4 to 4

config PORT05_INST02_L1SYNC_RECEIPT_TIMEOUT
2232 2233
	depends on PORT05_INST02_PROFILE_HA || (PORT05_INST02_PROFILE_CUSTOM &&  PORT05_INST02_L1SYNC_ENABLED="y") 
	int "L1SyncBasicPortDS.L1SyncReceiptTimeout"
2234 2235 2236 2237 2238 2239 2240 2241 2242
	default 3
	range 2 10
	help
	  The value of L1SyncReceiptTimeout specifies the number of elapsed 
	  L1SyncIntervals that must pass without reception of the L1_SYNC TLV 
	  before the L1_SYNC TLV reception timeout occurs.
	  The value is the logarithm to the base 2.
	  The configurable range shall be 2 to 10

2243 2244 2245 2246 2247 2248 2249 2250 2251 2252 2253 2254 2255 2256 2257 2258 2259 2260 2261 2262 2263 2264 2265 2266 2267 2268 2269 2270 2271 2272 2273 2274 2275 2276 2277
config PORT05_INST02_L1SYNC_TX_COHERENCY_IS_REQUIRED
	depends on PORT05_INST02_PROFILE_CUSTOM &&  PORT05_INST02_L1SYNC_ENABLED="y" 
	bool "L1SyncBasicPortDS.txCoherencyIsRequired"
	default y
	help
	   The Boolean attribute txCoherentIsRequired specifies the configuration of the L1Sync port and the
	   expected configuration of its peer L1Sync port. This configuration indicates whether the L1Sync port is
	   required to be a transmit coherent port.

config PORT05_INST02_L1SYNC_RX_COHERENCY_IS_REQUIRED
	depends on PORT05_INST02_PROFILE_CUSTOM &&  PORT05_INST02_L1SYNC_ENABLED="y" 
	bool "L1SyncBasicPortDS.rxCoherencyIsRequired"
	default y
	help
	  The Boolean attribute rxCoherentIsRequired specifies the configuration of the L1Sync port and the
	  expected configuration of its peer L1Sync port. This configuration indicates whether the L1Sync port is
	  required to be a receive coherent port.

config PORT05_INST02_L1SYNC_CONGRUENCY_IS_REQUIRED
	depends on PORT05_INST02_PROFILE_CUSTOM &&  PORT05_INST02_L1SYNC_ENABLED="y" 
	bool "L1SyncBasicPortDS.congruencyIsRequired"
	default y
	help
	  The Boolean attribute congruentIsRequired specifies configuration of the L1Sync port and the expected
	  configuration of its peer L1Sync port. This configuration indicates whether the L1Sync port is required to
	  be a congruent port

config PORT05_INST02_L1SYNC_OPT_PARAMS_ENABLED
	depends on PORT05_INST02_PROFILE_CUSTOM &&  PORT05_INST02_L1SYNC_ENABLED="y" 
	bool "L1SyncBasicPortDS.optParamsEnabled"
	default n
	help
	  The Boolean attribute optParamsEnabled specifies whether the L1Sync port transmitting the L1_SYNC
	  TLV extends this TLV with the information about the optional parameters.

2278 2279 2280 2281 2282 2283 2284 2285 2286
config PORT05_INST02_L1SYNC_OPT_PARAMS_TS_CORRECTED_TX_ENABLED
	depends on PORT05_INST02_L1SYNC_OPT_PARAMS_ENABLED="y" 
	bool "L1SyncBasicPortDS.timestampsCorrectedTx"
	default n
	help
	  When L1SyncOptParamsPortDS.timestampsCorrectedTx is TRUE, 
	  the L1Sync port shall correct the transmitted egress timestamps with 
	  the known value of the phase offset.

2287 2288 2289 2290 2291 2292
endmenu

endmenu

menu "PORT 6"

2293 2294 2295
config PORT06_IFACE
	string "Network interface"
	default "wri6"
2296
	help
2297
	  Used to set the physical port interface name: "wri[1-18]"