Commit 13f94d9e authored by Adam Wujek's avatar Adam Wujek 💬

userspace/wrsw_hal: update comments for wriX

Signed-off-by: Adam Wujek's avatarAdam Wujek <adam.wujek@cern.ch>
parent d145adb5
......@@ -39,11 +39,11 @@ int halexp_lock_cmd(const char *port_name, int command, int priority)
of the reference frequency. (priority) parameter
allows to distinguish between various reference
sources and establish a switchover order. For
example when wr0, wr1, wr2 have respectively
example when wri1, wri2, wri3 have respectively
priorities (1, 0, 2), the primary clock source is
wr1. When it dies (e.g. rats ate the fiber), the
PLL will automatically switch to wr1, and if wr1
dies, to wr2. When all the ports are down, the PLL
wri2. When it dies (e.g. rats ate the fiber), the
PLL will automatically switch to wri2, and if wri2
dies, to wri3. When all the ports are down, the PLL
will switch to holdover mode. In V3, calling this
command with negative (priority) removes the port
from the locking list.
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment