[issue #194] update init scripts to provide name of deamon in syslog

Init scripts start logger that prints output of deamons into syslogs. This logger is run with -p to attach tag. This tag is interpreted as the process that produces the following message. In the many init scripts this tag was set to wr-switch, incorrectly. This commit corrects it to include the name of the daemon.

[issue #194] update init scripts to provide name of deamon in syslog
Init scripts start logger that prints output of deamons into syslogs. This logger is run with -p to attach tag. This tag is interpreted as the process that produces the following message. In the many init scripts this tag was set to wr-switch, incorrectly. This commit corrects it to include the name of the daemon.
40718f5e · Maciej Lipinski · 696f4678 · 40718f5e · 40718f5e · 40718f5e
Commit 40718f5e authored Jun 12, 2019 by Maciej Lipinski
8 changed files
--- a/userspace/rootfs_override/etc/init.d/hald.sh
+++ b/userspace/rootfs_override/etc/init.d/hald.sh
@@ -22,7 +22,7 @@ start() {
 	eval LOGPIPE=\" \> $WRS_LOG 2\>\&1 \";
    else
 	# not a pathname: use verbatim
-	eval LOGPIPE=\" 2\>\&1 \| logger -t wr-switch -p $WRS_LOG\"
+	eval LOGPIPE=\" 2\>\&1 \| logger -t hald -p $WRS_LOG\"
    fi

    # set msg level

--- a/userspace/rootfs_override/etc/init.d/ppsi.sh
+++ b/userspace/rootfs_override/etc/init.d/ppsi.sh
@@ -28,7 +28,7 @@ start() {
 	eval LOGPIPE=\" \> $WRS_LOG 2\>\&1 \";
    else
 	# not a pathname: use verbatim
-	eval LOGPIPE=\" 2\>\&1 \| logger -t wr-switch -p $WRS_LOG\"
+	eval LOGPIPE=\" 2\>\&1 \| logger -t ppsi -p $WRS_LOG\"
    fi

 # be carefull with pidof, no running script should have the same name as process

--- a/userspace/rootfs_override/etc/init.d/rtud.sh
+++ b/userspace/rootfs_override/etc/init.d/rtud.sh
@@ -23,7 +23,7 @@ start() {
 	eval LOGPIPE=\" \> $WRS_LOG 2\>\&1 \";
    else
 	# not a pathname: use verbatim
-	eval LOGPIPE=\" 2\>\&1 \| logger -t wr-switch -p $WRS_LOG\"
+	eval LOGPIPE=\" 2\>\&1 \| logger -t rtud -p $WRS_LOG\"
    fi

    # set msg level

--- a/userspace/rootfs_override/etc/init.d/vlan.sh
+++ b/userspace/rootfs_override/etc/init.d/vlan.sh
@@ -30,7 +30,7 @@ start() {
 	eval LOGPIPE=\" \> $WRS_LOG 2\>\&1 \";
    else
 	# not a pathname: use verbatim
-	eval LOGPIPE=\" 2\>\&1 \| logger -t wr-switch -p $WRS_LOG\"
+	eval LOGPIPE=\" 2\>\&1 \| logger -t vlan -p $WRS_LOG\"
    fi

    # set msg level

--- a/userspace/rootfs_override/etc/init.d/wrs_auxclk.sh
+++ b/userspace/rootfs_override/etc/init.d/wrs_auxclk.sh
@@ -49,7 +49,7 @@ if echo "$WRS_LOG" | grep / > /dev/null; then
    eval LOGPIPE=\" \> $WRS_LOG 2\>\&1 \";
 else
    # not a pathname: use verbatim
-    eval LOGPIPE=\" 2\>\&1 \| logger -t wr-switch -p $WRS_LOG\"
+    eval LOGPIPE=\" 2\>\&1 \| logger -t auxclk -p $WRS_LOG\"
 fi

 # execute wrs_auxclk

--- a/userspace/rootfs_override/etc/init.d/wrs_custom_boot_script.sh
+++ b/userspace/rootfs_override/etc/init.d/wrs_custom_boot_script.sh
@@ -35,7 +35,7 @@ start() {
 	eval LOGPIPE=\" \> $WRS_LOG 2\>\&1 \";
    else
 	# not a pathname: use verbatim
-	eval LOGPIPE=\" 2\>\&1 \| logger -t wr-switch -p $WRS_LOG\"
+	eval LOGPIPE=\" 2\>\&1 \| logger -t custom_boot_script -p $WRS_LOG\"
    fi

    # set msg level
@@ -138,7 +138,7 @@ stop() {
 	eval LOGPIPE=\" \> $WRS_LOG 2\>\&1 \";
    else
 	# not a pathname: use verbatim
-	eval LOGPIPE=\" 2\>\&1 \| logger -t wr-switch -p $WRS_LOG\"
+	eval LOGPIPE=\" 2\>\&1 \| logger -t custom_boot_script -p $WRS_LOG\"
    fi

    if [ ! "$CONFIG_CUSTOM_BOOT_SCRIPT_ENABLED" = "y" ]; then

--- a/userspace/rootfs_override/etc/init.d/wrs_throttling.sh
+++ b/userspace/rootfs_override/etc/init.d/wrs_throttling.sh
@@ -29,7 +29,7 @@ start() {
 	eval LOGPIPE=\" \> $WRS_LOG 2\>\&1 \";
    else
 	# not a pathname: use verbatim
-	eval LOGPIPE=\" 2\>\&1 \| logger -t wr-switch -p $WRS_LOG\"
+	eval LOGPIPE=\" 2\>\&1 \| logger -t throttling -p $WRS_LOG\"
    fi

    echo -n "Starting wrs_throttling: "

--- a/userspace/rootfs_override/etc/init.d/wrs_watchdog.sh
+++ b/userspace/rootfs_override/etc/init.d/wrs_watchdog.sh
@@ -40,7 +40,7 @@ start() {
 	    eval LOGPIPE=\" \> $WRS_LOG 2\>\&1 \";
 	else
 	    # not a pathname: use verbatim
-	    eval LOGPIPE=\" 2\>\&1 \| logger -t wr-switch -p $WRS_LOG\"
+	    eval LOGPIPE=\" 2\>\&1 \| logger -t watchdog -p $WRS_LOG\"
 	fi

 	# set msg level