Commit c66964e6 authored by Alessandro Rubini's avatar Alessandro Rubini

barebox: force memory size to 64MB

This barebox version autodetects memory, but at installation time it
detects 8MB instead of 64MB.  This patch forces 64MB, like we used to
do in v2012.05 when no autodetection was there (actually, there the
pm9g45 harwired 128MB, but this had no side effects for us).
Signed-off-by: Alessandro Rubini's avatarAlessandro Rubini <rubini@gnudd.com>
parent 9c32cb7b
From 19d3d10267b52b3e4f35ec60051c0d96b0effdd8 Mon Sep 17 00:00:00 2001
From: Alessandro Rubini <rubini@gnudd.com>
Date: Tue, 13 May 2014 10:10:28 +0200
Subject: [PATCH 08/10] wrs (on pm9g45): force memory to 64MB
For some reason, yet unknown, autodetection of memory size during
installation fails and returns 8MB instead of 64MB. This make
installation fail. The sam9g45 code reads the ddr configuration to
calculate memory size, but it looks like memory configuration is
different from the runtime one
At install time (loader-configured RAM) CR = 0x7024, MDR = 0x10
At run time (at91boot-configured RAM) CR = 0x0030, MDR = 0x16
However, memory is actually all working, there is no 8MB-wide aliasing
in place.
I didn't go as far as to check what is happening, and just restored
the hardwired value, like we had in barebox-v2012.05 (actually,
*there* it was oversized).
Signed-off-by: Alessandro Rubini <rubini@gnudd.com>
---
arch/arm/boards/pm9g45/init.c | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
diff --git a/arch/arm/boards/pm9g45/init.c b/arch/arm/boards/pm9g45/init.c
index 9665c18..1f7cc1c 100644
--- a/arch/arm/boards/pm9g45/init.c
+++ b/arch/arm/boards/pm9g45/init.c
@@ -172,7 +172,7 @@ static void pm9g45_add_device_eth(void)
static int pm9g45_mem_init(void)
{
- at91_add_device_sdram(0);
+ at91_add_device_sdram(64 << 20); /* Hack: autodetection fails */
return 0;
}
--
1.7.7.2
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment