- 22 Jul, 2015 10 commits
-
-
Alessandro Rubini authored
Signed-off-by: Alessandro Rubini <rubini@gnudd.com>
-
Alessandro Rubini authored
This is the sequence of commits, in --reverse order (oldest on top): 6cdecd8b wr-servo: bugfix for unlikely whole-second offset f47f5656 wrs-socket: retry getting a tx_timestamp on failure d8718e55 wr: trivial: add tracing of the hooks de0f017b proto-starndard: invalidate T1 when entering slave mode 6be75000 proto-standard: call hook->handle_announce for all announce received 029fbf36 wr: trivial: remove a never-used IPC command 832bd0d5 wr-servo: move generation of the state name earlier 11c199bc WR: set system time from WR time 6ecdf970 wr-servo: run twice as fast Signed-off-by: Alessandro Rubini <rubini@gnudd.com>
-
Alessandro Rubini authored
Signed-off-by: Alessandro Rubini <rubini@gnudd.com>
-
Alessandro Rubini authored
Signed-off-by: Alessandro Rubini <rubini@gnudd.com>
-
Alessandro Rubini authored
The "pahse tracking: ON" line was confusing. It's only role is saying if tracking has been disabled (by wr_mon itlsef, because a user typed "t"). So the message is now absent unless tracking is forcibly disabled. Signed-off-by: Alessandro Rubini <rubini@gnudd.com>
-
Alessandro Rubini authored
And force the compiler to complain. It used to be on by default, bah.... Signed-off-by: Alessandro Rubini <rubini@gnudd.com>
-
Alessandro Rubini authored
Meanwhile, this cleans up declaration of functions that were not prototypes in wrsw_hal. Signed-off-by: Alessandro Rubini <rubini@gnudd.com>
-
Alessandro Rubini authored
Signed-off-by: Alessandro Rubini <rubini@gnudd.com>
-
Alessandro Rubini authored
If you re-build after stuff has been added to Kconfig, the .config you already have in place is wrong. This means the dot-config at runtime will have missing items. We thus force a silent "make oldconfig" at each build step, to ensure user preverences are saved, but new options get the default value. Signed-off-by: Alessandro Rubini <rubini@gnudd.com>
-
Alessandro Rubini authored
Signed-off-by: Alessandro Rubini <rubini@gnudd.com>
-
- 21 Jul, 2015 2 commits
-
-
Alessandro Rubini authored
Signed-off-by: Alessandro Rubini <rubini@gnudd.com>
-
José Luis Gutiérrez authored
Endpoint mode was not correctly displayed in endpointmode.php and endpointcalibration.php when dotconfig CONFIG_PORTXX_PARAMS did not include the protocol column. Now, the forms are correctly displayed with and without the protocol column in dotconfig. NOTE: we assume that the protocol column is there or not for all ports or for none of them. (not mixture)
-
- 17 Jul, 2015 9 commits
-
-
Alessandro Rubini authored
Signed-off-by: Alessandro Rubini <rubini@gnudd.com>
-
Alessandro Rubini authored
-
José Luis Gutiérrez authored
Text was not fitting the box. It has been reduced by 1.
-
José Luis Gutiérrez authored
Adding new functions to get method used, salt and counter for the different type of encryptation methods. By this moment, the web interface encrypts using md5 with a random salt by default. Old method removed.
-
José Luis Gutiérrez authored
Updating password from the web interface now modifies dotconfig instead of phpusers file. For security reasons the web interface only saves the password encrypted.
-
José Luis Gutiérrez authored
Login now uses the user and password from dotconfig instead of phpusers in filesystem. Now it is suposed to use same username and password for the shell and the web interface. Changes are also applicable for both of them. Nowadays there is only one user: "root"
-
Alessandro Rubini authored
Signed-off-by: Alessandro Rubini <rubini@gnudd.com>
-
Alessandro Rubini authored
Signed-off-by: Alessandro Rubini <rubini@gnudd.com>
-
Alessandro Rubini authored
-
- 16 Jul, 2015 5 commits
-
-
Alessandro Rubini authored
The apply_dot-config script was wrong: it wouldn't force on the empty root password. Thus, if it is set to something non-empty and then changed (by a network dot-config) to empty, it won't work. This bug only revealed on nfs-root setups. Now, it's stupid to keep two symbols (ROOT_PWD_CLEAR and ROOT_PWD_CYPHER), and I could simplify the script. And re-test. And change docs. No thanks. Signed-off-by: Alessandro Rubini <rubini@gnudd.com>
-
Alessandro Rubini authored
Signed-off-by: Alessandro Rubini <rubini@gnudd.com>
-
Alessandro Rubini authored
Signed-off-by: Alessandro Rubini <rubini@gnudd.com>
-
Alessandro Rubini authored
Signed-off-by: Alessandro Rubini <rubini@gnudd.com>
-
Alessandro Rubini authored
lm32-vuart was destroying the tty it was run into. And ctrl-C was not working (the initial message "press ctrl-A" was not really visible). This removes part of the cruft of the program. It also adds a little delay when no bytes are there to read from FPGA to releaf a little the load on the ARM CPU. Signed-off-by: Alessandro Rubini <rubini@gnudd.com>
-
- 15 Jul, 2015 14 commits
-
-
Alessandro Rubini authored
I already fixed that, but likely I made an error in "git rebase -i" before pushing to master. Signed-off-by: Alessandro Rubini <rubini@gnudd.com>
-
José Luis Gutiérrez authored
New CSS style for sfpcalibration.php and endpointcalibration.php and management.php to make it fit in the layout for both Firefox and Chrome for both Windows and Linux.
-
José Luis Gutiérrez authored
Blank spaces and lines have been removed. Now in management.php users can modify DOT_CONFIG_URL A warning message when uploading or adding URL dotconfig is now shown.
-
José Luis Gutiérrez authored
In case dotconfig file has been modified by other users, the web interface shows an alert, reloads dotconfig and the data structure.
-
José Luis Gutiérrez authored
WR-PPSi now supports GrandMaster, Boundary Clock and FreeRunning modes using dotconfig. NTP server is now in PPSi configuration. When users try to set a NTP server in BC mode, there is an alert message because of the WR timing override. Help messages have been changed for management.php and ptp.php because of these changes. When the user tries to save changes and dotconfig file was modified by other user, the data structure must be reloaded (changes are not done)
-
José Luis Gutiérrez authored
WRS mode and NTP server will be part of WR-PPSi section.
-
José Luis Gutiérrez authored
Because of the NTP configuration, PPSI Setup section is now WR-PTP Setup
-
José Luis Gutiérrez authored
There was a display error when Vendor Serial(VS) was the first value and there was no Vendor Name (VN) When an entermediate element from the SFP list was deleted, that space was never used anymore. When there is no more space an alarm message is now shown.
-
José Luis Gutiérrez authored
Add and delete icons added instead of plain text. Form view has also been improved
-
José Luis Gutiérrez authored
Network configuration changes now displays an alert message (changed also in CSS file in previous commit)
-
José Luis Gutiérrez authored
dotconfig backup includes now serial number of the wrs. help message does not display all info in bold... COmmand to get monitor status improved: it looks for the last field, which is the always the status.
-
José Luis Gutiérrez authored
Form name fields for aux clock does not display now "aux.clock" for all of them since this is not necessary.
-
José Luis Gutiérrez authored
-
José Luis Gutiérrez authored
Users can now go from the endpoint mode selection screen to the advanced one to change endpoint's protocol, fiber, tx, rx, etc...
-