1. 03 Jun, 2019 3 commits
  2. 21 May, 2019 1 commit
  3. 14 Dec, 2016 2 commits
  4. 02 Dec, 2016 1 commit
  5. 01 Dec, 2016 6 commits
  6. 07 Jul, 2016 6 commits
  7. 18 Feb, 2016 1 commit
    • Alessandro Rubini's avatar
      build/download: make wget timeout sooner and avoid retrying · c9e95e69
      Alessandro Rubini authored
      The upstream address for lsof is not working. While the download script
      tries buildroot.net if upstream fails, getting lsof got stuck for
      no connection to the server.
      With this commit it times out after 15 seconds to then proceed using
      the buildroot address. I expect the problem to affect other upstream
      files over time, so the commit doesn't fix the link but the tool.
      Signed-off-by: Alessandro Rubini's avatarAlessandro Rubini <rubini@gnudd.com>
  8. 27 Aug, 2015 1 commit
  9. 29 Jul, 2015 1 commit
    • Alessandro Rubini's avatar
      userspace: new dot-config directory; allow 'make config' in target · 7a42391f
      Alessandro Rubini authored
      This factorized configuration stuff out of wrap_rootfs into a build
      target.  It also adds building and installing "conf" so to allow the
      following commands in the target (in /wr/etc):
      	  make config
      	  make oldconfig     (likely after editing dot-config)
      	  make defconfig
      I'm unable to build menuconfig at this time, because of missing
      symbols in the target's libncurses. I hope to fix this when we
      bump buildroot up (thanks Adam for that!)
      Signed-off-by: Alessandro Rubini's avatarAlessandro Rubini <rubini@gnudd.com>
  10. 22 Jul, 2015 2 commits
  11. 16 Jul, 2015 1 commit
  12. 14 Jul, 2015 1 commit
  13. 09 Jul, 2015 1 commit
  14. 29 Jun, 2015 1 commit
  15. 08 Jun, 2015 1 commit
  16. 16 Jan, 2015 1 commit
  17. 04 Jan, 2015 1 commit
  18. 03 Jan, 2015 1 commit
    • Benoit Rat's avatar
      build: add DEBUG flag to HAL so that TRACE is not silent · ffa7bd69
      Benoit Rat authored
      Most of the calls in HAL use TRACE to print to stdout/stderr however
      the full TRACE is depending on DEBUG flag at compilation.
      This is a quick hack, and the whole TRACE system should be re written
      with something like:
      #ifdef DEBUG
  19. 11 Dec, 2014 7 commits
  20. 16 Oct, 2014 1 commit
    • Alessandro Rubini's avatar
      boot procedure: use non-blocking write to /dev/ttyGS0 · 16d93070
      Alessandro Rubini authored
      If the usb cable is disconnected, any write to /dev/ttyGS0 goes to a
      buffer until it fills. Then, any further write will block. This means
      the messages towards the user ("uncompressing filesystem... done" etc)
      caused the update procedure to stop.
      This fixes the problem by using non-blocking write for the messages:
      if nobody`s reading the messages are just discarded by the kernel.
      Signed-off-by: Alessandro Rubini's avatarAlessandro Rubini <rubini@gnudd.com>