Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

also fixes a typo, not exposed unless you use -m ddr
Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

The snmpwalk client has a bug in returning 64-bit values.
This redoes what we are already doing in wrsPpsi.c.  It's bad,
but mandatory at this point.
Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

This adds an snmp stanza with the white rabbit date.
However, it has 64-bit problems (it's the client, not the server).
See next commit.
Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

The name was inconsistent with anything else, and we must simplify
and get consistent.

A symlink with the old name is provided.
Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

This is similar to the kernel patch, but its impact is less
important: barebox is only reading nand in our setup, and it looks
like it never failed (on the other hand, the times were definitely out
of specifications).
Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

We used the timing from the g45ek, but ours is slower. Actually, ours
is slower only in 16-bit mode, and has the same timing when used in
8-bit mode.

Our timing setup was outside of the allowed specification, and resulted
in random and unreproducible failures.  The "visible" effect is
that reading 100MB takes 13.4s instead of 11.4s, measured with:

  time dd bs=1k count=102400 < /dev/mtd1 > /dev/null

You can try another, still slower, setup just by hand, like this
(in this order):

   devmem 0xffffe83c w 0x00051003
   devmem 0xffffe838 w 0x000f000f
   devmem 0xffffe830 w 0x04060406

but the current settings (41003, 000c000c, 02040204) are alread within
specification.
Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

Ports info (header) was updated only in index.php. Now it is refreshed
every 15 seconds.

- Reference to advanced menu was not working properly after accessing
firmware.php and load.php (fixed)
- Global switch description in index.php output format for wr_date
- Adding 1 second delay for reboot
- Loading FPGA/lm32 bin now displays a warning message

Adding hostname@ip to the output. It is now displayed

Priority combobox changed to 0-7

ntp UTC combobox fixed.

- Now terminal emulator cursor is always focused on text input.
	- Change password menu shows admin user as read-only.

Previous changes on /etc files were not saved after reboot.
Fixed --> /usr/etc

- previous wr_date get not working: changed to wr_date -n get
	- fixing startup php filesize to 40M

- Php filesize field has been removed(user cannot change it).
		- Permanently set to 40M.
	- DHCP/Static IP is now accesible from the main menu.

minor format fixes

- Fixing javascript to include more than 1 table style
	- Vlan fix
	- Adding port 2 vlan management
	- minor fixes
	- Enable/Disable SNMP

Adding Web Management Interface info to the wrs-user_guide document

	- wwwlogin.png screenshot
	- wwwmanagement.png screenshot

New format changes
	- New CSS descriptors
	- table format change for endpoint, firmware, load, management

		and vlan php files

Web interface VLAN improvements:
	- adding hex2bin function for vlan mask
	- Minor fixes
	- checking empty entry values for vlan

Fixing www page redirection bugs

Minor changes:
	- deleting unused file administration.php
	- adding mount RW and RO in case it is neccesary to load,
network and ptp

New login system:

	- default login: "admin", password ""
	- possibility of changing password

Loging user&password are different from swith user/pass. It is now
stored in /etc/phpusers.

	- adding vlans
	- setting ports to vlan
	- remove vlans

Adding neccesary functions for vlan support

Front-end Adaptation to WRS 4.0:
	- New firmware menu
	- endpoint tools adaptation.
	- ppsi adaptation
	- adding firmware tools (not ready, needs back-end).
	- terminal fixes
	- dhcp vs static ip

- Minor fixes

Switch Management Update:
	- NTP Server Added + UTC
	- Possibility of loading .config files (ppsi, sfp, snmp, hal)
	- Restore all config files from backup.
	- Backup all config files.

Added folder downloads/, used for backup downloads.

New contact/about page:
	- 7S, UGR & CERN logos
	- wr-switch developers added.

Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

Kernel support for verifying writes is not subpag-aware, and the
net result is a complete failure.

This reverts commit bdccd4d9.

There is an extra "rm" for a file that has already been removed.

  rm: cannot remove `/tmp/flash-wrs-MccpGE/bb.new': No such file or directory

This fixed the problem.
Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

We had
   /etc/init.d/wrs-boot-procedure: line 104: tee: not found

because tee is not in /bin; we need to always use "busybox tee".
This adds a variable TEE="busybox tee" to make it easier to remind, at
later edits, and fit in 80 columns at the same time.
Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

I'm confused by TAI/UTC: let's wr_date make it clear that it is
reporting TAI.  Nobody parses this output so far: the web interface
uses it, but it prints back the whole output.

So this change is safe.
Signed-off-by: Alessandro Rubini <rubini@gnudd.com>