1. 14 Dec, 2016 2 commits
  2. 02 Dec, 2016 1 commit
  3. 01 Dec, 2016 2 commits
  4. 07 Jul, 2016 2 commits
    • Adam Wujek's avatar
      build: remove buildroot packages from download-info · 242fbd5a
      Adam Wujek authored
      Instead of keeping the list of archives in build/download-info which should be
      downloaded for buildroot, we use "make source" to do the same job.
      However, the task of building buildroot had to split into 3 tasks:
      --init (unpack and configure buildroot)
      --download (download the source of used buildroot packages)
      --build (compile buildroot packages, etc.)
      
      The reason for this change is to avoid updating the download-info file when
      buildroot package is updated. Additionally ltrace is not downloaded as an
      archive, but it is cloned git repo. After the clone it is packed into archive.
      In the current state our framework cannot do the same.
      Signed-off-by: Adam Wujek's avatarAdam Wujek <adam.wujek@cern.ch>
      242fbd5a
    • Adam Wujek's avatar
      buildroot: uplift to 2016.02 · 4c227ef1
      Adam Wujek authored
      Signed-off-by: Adam Wujek's avatarAdam Wujek <adam.wujek@cern.ch>
      4c227ef1
  5. 27 Aug, 2015 1 commit
  6. 29 Jul, 2015 1 commit
    • Alessandro Rubini's avatar
      userspace: new dot-config directory; allow 'make config' in target · 7a42391f
      Alessandro Rubini authored
      This factorized configuration stuff out of wrap_rootfs into a build
      target.  It also adds building and installing "conf" so to allow the
      following commands in the target (in /wr/etc):
      
      	  make config
      
      	  make oldconfig     (likely after editing dot-config)
      
      	  make defconfig
      
      I'm unable to build menuconfig at this time, because of missing
      symbols in the target's libncurses. I hope to fix this when we
      bump buildroot up (thanks Adam for that!)
      Signed-off-by: Alessandro Rubini's avatarAlessandro Rubini <rubini@gnudd.com>
      7a42391f
  7. 14 Jul, 2015 1 commit
  8. 09 Jul, 2015 1 commit
  9. 08 Jun, 2015 1 commit
  10. 11 Dec, 2014 1 commit
  11. 07 Aug, 2014 1 commit
  12. 10 Jul, 2014 1 commit
  13. 14 May, 2014 1 commit
  14. 02 May, 2014 1 commit
  15. 17 Feb, 2014 3 commits
  16. 24 Jul, 2013 1 commit
  17. 04 Apr, 2013 1 commit
    • Benoit Rat's avatar
      build, userspace: supporting LX130T & LX240T FPGAs · 78719448
      Benoit Rat authored
      * flash-wrs: add gateware selection to only use 2 HDL binaries because the RAM size is not big enough to extract 4 HDLs during flashing
      * build: add the new gatewares with PWM and LX240T support for 18ports & 8ports
      * userspace: Select the proper gateware to load on fpga using the shw_ver tool and the i2c dip switch on miniBP
      78719448
  18. 19 Dec, 2012 1 commit
  19. 01 Aug, 2012 1 commit
    • Alessandro Rubini's avatar
      build: use a unique and future-proof gateware name · 6108fea4
      Alessandro Rubini authored
      The file I uploaded to ohwr (wrs3-gw-v3.0-20120801.tar.gz) is not
      expected to be renamed or overwritten in the future, so this commit
      and the following ones will always build properly.
      
      We had this problem with the previous file name being replaced, so
      older commits didn't build any more for lack of the required gateware
      file or md5sum errors.
      6108fea4
  20. 30 Jul, 2012 1 commit
  21. 17 Jul, 2012 1 commit
  22. 16 Jul, 2012 1 commit
  23. 20 Jun, 2012 1 commit
  24. 12 Mar, 2012 1 commit
  25. 12 Jan, 2012 1 commit
  26. 11 Jan, 2012 1 commit
  27. 10 Jan, 2012 2 commits
  28. 08 Jan, 2012 1 commit
  29. 23 Apr, 2011 2 commits