tcpip tcp x , set the tcp server listen port
        tcpip udp txip x.x.x.x , set the udp tx destination ip addr.
        tcpip udp txport x , set the udp tx destination port, default
2000
        tcpip udp rxport x , set the udp rx destiniation port. default
(>256).
        tcpip udp txgw x.x.x.x , set the udp gateway, default x.x.x.1
        tcpip udp txsn x.x.x.x , set the subnet, default 255.255.255.0

Add support of multiboot.

through UDP packets.
   See related document for further help.

LM32 software for WRPC release v4.2

Please not that LLDP_TX_TICK_INTERVAL is not about ticks, but about
number of task executions. This should be changed to time.
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Change indentation of switch statement.
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

On VFC-HD reading EEPROM was taking too long. E.g. reading SFP database through
snmp was taking ~0.5s which was enough to break the timestamps for received PTP
frames and thus the timing. See issue 1649 in wr-cores project on OHWR.

Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

There is no ns monotonic counter:(
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Also print it in the ps command
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>