Explore projects
-
The FmcAdc500M14b4cha is a 4-channel 500 MSPS 14 bit ADC card in FMC (FPGA Mezzanine Card, VITA 57.1) format using a High Pin-Count (HPC) connector.
Updated -
Frequency Scanning Interferometry (FSI) photodetection module with 8 channels. It enables data acquisition of optical signals from the gas cell, the reference interferometers and return signals of interferometer channels.
Updated -
The FMC Motion Front-End (fmc-mfe) aims at providing analog and digital environment for the control of up to 8-axis. More info at the Wiki page
Updated -
FMC HPC PT100 temperature sensor interface card. Allows connection of 15 sensors in a 4-wire configuration. Used in SAMbuCa project. More info at the Wiki page
Updated -
Projects / AIDA-2020 TLU - Gateware
GNU General Public License v3.0 or laterFPGA Firmware ( "Gateware" ) for AIDA-2020 TLU and AIDA mini-TLU
Uses "IPBus Build" ( ipbb )
Build instructions at Instructions here
Updated -
PXIe FMC carrier board for a HPC FMC card. Based on Xilinx Zynq UltraScale+. More info at the Wiki page
Updated -
Projects / SIS1160 PCI-L IO add on
CERN Open Hardware Licence Version 2 - Weakly ReciprocalA front-end PCI board with LEMO connectors to interface with the GPIO interconnect pins of the SIS1160 FMC carrier. More info at the Wiki page
Updated -
Projects / AIDA-2020 TLU - Software
GNU Affero General Public License v3.0Updated -
Projects / FMC High-Voltage supply - fmc-hv-2ch
GNU Lesser General Public License v2.1 onlyFMC LPC card with two High Voltage (HV) outputs and one Low Voltage (5-10V) output. Has mV voltage sensing and mA current sensing capabilities. More info at the Wiki page
Updated -
Updated
-
FMC-PROFINET is a PROFINET device (“slave”) card based on the Siemens ERTEC200 chip in the FMC-LPC form-factor.
Updated -
AFCKU is dual FMC carrier in AMC format based on Kintex Ultrascale SoC devices. It supports White Rabbit and RTM modules. More info at the Wiki page.
Updated -
AMC FMC Carrier with Kintex is designed to support FMC boards. Equiped in Xilinx Kintex-7 FPGA. It allows to connect clock source to any clock input More info at the Wiki page
Updated -
Projects / AMC FMC Carrier AFC
CERN Open Hardware Licence v1.1AMC FMC Carrier is designed to support FMC boards. Equipped with Xilinx Artix-7 FPGA. It allows to connect clock source to any clock input. More info at the Wiki page
Updated -
AFCZ is dual FMC carrier in AMC format based on ZU7EV or ZU11EG SoC devices. It supports White Rabbit and RTM modules. More info at the Wiki page.
Updated -
The Dual AMC carrier enables stand-alone operation of an AMC FMC carrier or any other AMC board. It has 4 SFP connectors, 2 QSFP cages, 8 trigger I/O routed to the MLVDS ports and power entry. Two versions, allowing the use of a RTM or not. More info at the Wiki page
Updated -
The AMC micro backplane enables stand-alone operation of an AMC FMC carrier or any other AMC board. It has 4 SFP connectors, 2 QSFP cages, 8 trigger I/O routed to the MLVDS ports and power entry. *Superseded by the project amc-carrier-2-sl*
Updated -
A low cost, low complexity FMC carrier based on Xilinx Artix-7
Updated -
CROME FMC carrier board (SPEC -based) for the CROME project. More info at the Wiki page
Updated -
The CTR FMC is an FMC card that can be used, in conjunction with the Simple PCIe FMC carrier (SPEC), to design a General Machine Timing (GMT) Receiver. More info at the Wiki page
Updated