Explore GitLab
Discover projects, groups and snippets. Share your projects with others
-
Projects / adc-lib
This library provides a generic API for ADC devices, so that applications can use this API to access any of the supported ADC boards. Currently the library supports the following boards:
fmc-adc-100m14b14chaFor testing and debugging purpose it supports also a couple of virtual boards that you can use to start the development of your application.
0updated -
Milosz Malczak / adc-lib
This library provides a generic API for ADC devices, so that applications can use this API to access any of the supported ADC boards. Currently the library supports the following boards:
fmc-adc-100m14b14chaFor testing and debugging purpose it supports also a couple of virtual boards that you can use to start the development of your application.
0updated -
Projects / AIDA-2020 TLU
A Trigger/Timing Logic Unit designed for use with High Energy Physics beam-tests. Provides a simple and flexible interface for fast timing and triggering signals at the AIDA pixel sensor beam-telescope. Connects to a FPGA carrier card via a FMC connector.
( N.B. Use the sub-project Git repositories, not the top level repository )
0updated -
Projects / AIDA-2020 TLU - Gateware
FPGA Firmware ( "Gateware" ) for AIDA-2020 TLU and AIDA mini-TLU
Uses "IPBus Build" ( ipbb )
Build instructions at Instructions here
1updated -
Yi Liu / AIDA-2020 TLU - Gateware
FPGA Firmware ( "Gateware" ) for AIDA-2020 TLU and AIDA mini-TLU
Uses "IPBus Build" ( ipbb )
Build instructions at Instructions here
0updated -
1updated
-
1updated
-
0updated
-
Projects / AMC FMC Carrier AFC
AMC FMC Carrier is designed to support FMC boards. Equipped with Xilinx Artix-7 FPGA. It allows to connect clock source to any clock input. More info at the Wiki page
4updated -
Projects / AMC FMC Carrier AFCZ
AFCZ is dual FMC carrier in AMC format based on ZU7EV or ZU11EG SoC devices. It supports White Rabbit and RTM modules. More info at the Wiki page.
0updated -
Projects / AMC FMC Carrier Kintex AFCK
AMC FMC Carrier with Kintex is designed to support FMC boards. Equiped in Xilinx Kintex-7 FPGA. It allows to connect clock source to any clock input More info at the Wiki page
0updated -
Projects / AMC FMC Carrier Kintex Ultrascale AFCKU
AFCKU is dual FMC carrier in AMC format based on Kintex Ultrascale SoC devices. It supports White Rabbit and RTM modules. More info at the Wiki page.
0updated -
Projects / AMC uBackplane SFP
The AMC micro backplane enables stand-alone operation of an AMC FMC carrier or any other AMC board. It has 4 SFP connectors, 2 QSFP cages, 8 trigger I/O routed to the MLVDS ports and power entry. *Superseded by the project amc-carrier-2-sl*
0updated -
Projects / Artix Trivial FMC Carrier ATFC
A low cost, low complexity FMC carrier based on Xilinx Artix-7
0updated -
Projects / Compact Universal Timing Endpoint based on White Rabbit
A cute-wr is a compact WR-node implementation with minimum components required. The initial design is derived from SPEC, but would work in an opposite manner as a FMC wr-nic, providing 2 DIO channels, external CLK input, EEPROM, JTAG, RS232, and expandable IOs through FMC connector. The gateware and software of cute-wr would also keep maximum compatibility with SPEC. Project is obsolete. See cute-wr-dp for a similar board.
0updated -
Projects / CROME FMC Carrier
CROME FMC carrier board (SPEC -based) for the CROME project. More info at the Wiki page
0updated -
Projects / CTR FMC 5 CH TTL RS485
The CTR FMC is an FMC card that can be used, in conjunction with the Simple PCIe FMC carrier (SPEC), to design a General Machine Timing (GMT) Receiver. More info at the Wiki page
0updated -
Projects / DIOT Kintex Ultrascale-based Peripheral Board FMC Carrier
DI/OT Kintex Ultrascale-based Peripheral Board with HPC FMC and SODIMM DDR4 slot. More info at the Wiki page
1updated -
Projects / Dual AMC Carrier
The Dual AMC carrier enables stand-alone operation of an AMC FMC carrier or any other AMC board. It has 4 SFP connectors, 2 QSFP cages, 8 trigger I/O routed to the MLVDS ports and power entry. Two versions, allowing the use of a RTM or not. More info at the Wiki page
0updated -
Projects / EMC2-DP
PC/104 OneBank Carrier for SoC Modules. The EMC2-DP is a PCIe/104 OneBank Carrier for a Trenz compatible SoC Module and has expansion for a VITA57.1 FMC LPC I/O board and also has I/O pins, using a 100-way Samtec RazorBeam connectors system. Board developed with EU funding on the Artemis EMC2 project. More info at the Wiki page
1updated