@@ -43,6 +43,12 @@ To clean the compilation files (binaries, objects and dependence files), just ru
## Programming LPC1764
If you own a *LPCLink* board, you can use it to program the LPC1764 processor via its JTAG interface
First, make sure that the LPCXpresso path is set correctly inside `<openMMC_root_folder>/CMakeLists.exe`
set(LPCXPRESSO_PATH <lpcxpresso_path>)
*NOTE*: You can also use cmake-gui to set this option.
To transfer only the application firmware, run
make program_app
...
...
@@ -56,4 +62,5 @@ If you want to erase the whole Flash and copy both firmwares:
make program_all
**NOTE**: In this case you must have the LPCXpresso installed in your machine, since we need to use some initialization scripts that they provide.
**NOTE 2**: We only have linker scripts to LPC1764, so if you wish to compile to a different target, you'll have to change the `linker\lpc1764_boot.ld` and `linker\lpc1764_app.ld` files, which defines the memory regions, otherwise you'll run into some HardFault errors.
**NOTE 2**: We only have linker scripts to LPC1764, so if you wish to compile to a different target, you'll have to change the `linker/lpc1764_boot.ld` and `linker/lpc1764_app.ld` files, which defines the memory regions, otherwise you'll run into some HardFault errors.
