Skip to content

F
FMC DEL 1ns 4cha - Software
Commit 2050aba9 authored by Alessandro Rubini's avatar Alessandro Rubini
Browse files
Options

doc: fix lib/firmware pathname

parent ee1d05e6
Hide whitespace changes
Inline Side-by-side
Showing with 5 additions and 5 deletions
doc/fine-delay.in
View file @ 2050aba9
...@@ -380,7 +380,7 @@ and this package will use it. ...@@ -380,7 +380,7 @@ and this package will use it.
To install the FPGA image in the target system, please follow the To install the FPGA image in the target system, please follow the
instruction in the documentation of @i{spec-sw}. To summarize, you'll instruction in the documentation of @i{spec-sw}. To summarize, you'll
need to place the @code{.bin} file, properly renamed, in need to place the @code{.bin} file, properly renamed, in
@i{/lib/firmware}. @i{/lib/firmware/fmc}.
If you have several @i{fine-delay} cards in the same host, you can If you have several @i{fine-delay} cards in the same host, you can
install several copies of the binary, renamed to match the bus and install several copies of the binary, renamed to match the bus and
...@@ -391,7 +391,7 @@ something else than the @i{fine-delay} module). ...@@ -391,7 +391,7 @@ something else than the @i{fine-delay} module).
If you use the White-Rabbit version of the firmware, you also need If you use the White-Rabbit version of the firmware, you also need
the @code{wrc.bin} file, renamed as @i{spec-sw} looks for it. the @code{wrc.bin} file, renamed as @i{spec-sw} looks for it.
In my system, where the @i{fine-delay} card is at bus 2 slot 0, I use In my system, where the @i{fine-delay} card is at bus 2 slot 0, I use
the following two files in @i{/lib/firmware}: the following two files in @i{/lib/firmware/fmc}:
@smallexample @smallexample
-rw------- 1 root root 58628 May 4 21:15 spec-B0002-cpu.bin -rw------- 1 root root 58628 May 4 21:15 spec-B0002-cpu.bin
...@@ -402,9 +402,9 @@ Also, please note that you must pass the parameter @code{lm32=0xc0000} ...@@ -402,9 +402,9 @@ Also, please note that you must pass the parameter @code{lm32=0xc0000}
to the @i{spec.ko} module, because the default address (0x80000) is not to the @i{spec.ko} module, because the default address (0x80000) is not
appropriate to the gateware of this device. appropriate to the gateware of this device.
@b{Note:} in local CERN installations, the pathnames for the firmware @b{Note:} if you are running a slightly earlier version of
loaded in @i{spec-sw} have been changed to load from @i{spec-sw}, the files for the firmware loaded in @i{spec-sw}
@code{/lib/firmware/fmc/} instead of @code{/lib/firmware}. live in @code{/lib/firmware} instead of @code{/lib/firmware/fmc/}.
@c ========================================================================== @c ==========================================================================
@node Software Dependencies @node Software Dependencies
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment