-
Federico Vaga authored
The ADC start an acquisition only if post-samples > 0. So the acquired samples are always greater or equal 2. The driver previously tried to fix this by descrease the number of required post-samples directly in the hardware. But on user request of post-samples=1 this means request post-samples=0 to the ADC: so, it will not work. This patch leave unchanged the logic of the ADC and remove the extra samples directly from the acquired buffer. We are aware that this will waste 10ns of acquisition, but the software implementation to handle this issue is more expensive Signed-off-by: Federico Vaga <federico.vaga@cern.ch>
33cfe823