FMC VHDCI
FMC VHDCI is a simple breakout board that connects signals from an Low
Pin Count (LPC) FMC connector to an VHDCI connector.
The signals are not buffered, so you really should pay attention
using this board as there is no protection from blowing up the expensive
carrier board that you use it on.
Buffers could be deployed on the card attaching to the VHDCI cable on
the other side, but this approach gives more flexibility in terms of
signal direction or
type.
Functional specifications
- LA00_P/N to LA33_P/N direct connection to VHDCI connector (68 signals)
Project information
Contacts
Project
Commercial producers
- None
Project Status
Date | Event |
---|---|
21-11-2016 | ohwr project created. |
Timon Heim, Erik van der Bij - 8 January 2017