Skip to content

P
PPSi
Commit 718369b7 authored by Pietro Fezzardi's avatar Pietro Fezzardi Committed by Alessandro Rubini
Browse files
Options

trivial: doc: fixed typos

parent 616d9ef4
Hide whitespace changes
Inline Side-by-side
Showing with 4 additions and 4 deletions
doc/ppsi-manual.in
View file @ 718369b7
...@@ -156,7 +156,7 @@ The package currently supports the following architectures: ...@@ -156,7 +156,7 @@ The package currently supports the following architectures:
doesn't apply to the WR switch, and modelling it as a doesn't apply to the WR switch, and modelling it as a
separate architecture is the simplest and cleanest approach, separate architecture is the simplest and cleanest approach,
in our opinion (even if it leads to some code duplication). in our opinion (even if it leads to some code duplication).
The architectures relies on @i{time-wrs}. The architectures relies on @i{time-wrs}.
@item wrpc @item wrpc
...@@ -244,7 +244,7 @@ suggests Unix timing code (@t{TIME?=unix}). ...@@ -244,7 +244,7 @@ suggests Unix timing code (@t{TIME?=unix}).
If you want to support a different timing engine within the Unix build If you want to support a different timing engine within the Unix build
system, you can use ``@t{make TIME=xyz}'' to request building system, you can use ``@t{make TIME=xyz}'' to request building
the@u{time-xyz} subdirectory. Please note that the Unix time the @i{time-xyz} subdirectory. Please note that the Unix time
structures are built anyways, so you can piggy-back on those structures are built anyways, so you can piggy-back on those
functions, either within your own methods or by replacing the functions, either within your own methods or by replacing the
@t{ppi->t_ops} and @t{ppi->n_ops} for the communications links that do @t{ppi->t_ops} and @t{ppi->n_ops} for the communications links that do
...@@ -461,7 +461,7 @@ timestamps and internal averaging. ...@@ -461,7 +461,7 @@ timestamps and internal averaging.
@item BMC: at level 1 PPSi reports BMC choices, at level 2 it reports @item BMC: at level 1 PPSi reports BMC choices, at level 2 it reports
addition of new masters as well. addition of new masters as well.
@item Externsions: extension-specific information. @item Extensions: extension-specific information.
@item Configuration: at level 1 PPSi reports errors, at level 2 all @item Configuration: at level 1 PPSi reports errors, at level 2 all
configuration items being parsed (from either files or command line). configuration items being parsed (from either files or command line).
...@@ -622,7 +622,7 @@ This is, for example, the dump of two UDP frames: ...@@ -622,7 +622,7 @@ This is, for example, the dump of two UDP frames:
@node pps-out @node pps-out
@section pps-out @section pps-out
The tools outputs a pulse-per-second signal to a parallel port or a The tool outputs a pulse-per-second signal to a parallel port or a
serial port. Most likely it only works on an x86 Linux system because serial port. Most likely it only works on an x86 Linux system because
of direct access to I/O ports -- no such portability problem is of direct access to I/O ports -- no such portability problem is
expected for serial ports. For this reason it is not built by expected for serial ports. For this reason it is not built by
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment