Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

Actually, until this commit we could not use pp_printf inside
ppsi.h, in inline functions or whatever.
Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

This adds the interface name where the error happened (we'll need it
for multi-link setups, that Aurelio is going to implement soon).

Moreover, this kills the last pp_diag_error call
Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

This finally removes the diag directory by folding two one-line
functions into diag.h.  The dir is a relic of ptp-proposal that
hosted pp_printf, but now we have it separate anyways.
Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

fsm.c is the only user of timed_printf, and actually I don't expect
other messages to need timing (since we know the time from the fsm
states).

I may repent, I'm aware. But at this point I'm killing diag-yes, to
make the one and true diagnostic environment, without duplications and
conflicts.
Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

Since diagnostics about the fsm is only used in fsm.c, move it there
so we have less global context and we are all happier.
Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

diag_fatal enters a while(1) loop, but the code here reports the
error to the caller. So calling diag_fatal was wrong.
Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

Really, this is an extrac complexity with no advantage (did we ever
use it?)  If users really want a small system they can choose the NONE
implementation of pp_printf.  The extra half a kilobyte saved by diag-no
is really not worth the effort:

% make clean; make -s ARCH=bare-i386 CONFIG_PRINTF_NONE=y
% size ppsi.o
   text    data     bss     dec     hex filename
  10323     208     264   10795    2a2b ppsi.o

% make clean; make -s ARCH=bare-i386 CONFIG_PRINTF_NONE=y PPSI_NO_DIAG=y
% size ppsi.o
   text    data     bss     dec     hex filename
   9792     208     264   10264    2818 ppsi.o
Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

fsm.c corrently decodes the received frame, and error management is
built in (even if code in msg.c still needs to be audited to be more
careful about rogue frames).  However, when a received frame is in
error, fsm.c cannot return to the caller because it doesn't know the
current delay. Thus, zero the frame and call the current status, so
we have back a recalculated ppi->next_delay.

Meanwhile, mask with pp_verbose_frames the diagnostic message for
received frames -- and be more careful with accessing it's data.
Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

A number of states were setting ppi->next_delay before re-setting
it to a different value, or setting it on a state change (which now
occurs immediately)
Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

fsm states where we are waitiing for a frame or for a timeout,
now correctly set next_delay to the right number of milliseconds.
Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

The new function reports how many ms in the future is a timeout event,
to be able to correctly time when we should re-entering the state machine
and correctly spread our frames according to the specification.
Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

The function is called by several states, but only state-slave
is checking the delay request timeout. Thus, this commit removes
the associated lines from the common function and moves them back
to state-slave, the only state that issues delay_request frames.
Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

All archs allocated one foreign master, but the default was 5 and
the command line could even change it.  Hardwire the number to 5
and skip the allocation by folding the array in pp_instance itself.

Anyways, the add_foreign() function needs serious review, later on.
Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

the pp instance is bound to a network interface, so avoid a separate
allocation.
Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

By post-incrementing sent_seq we had a value that was not
really the "last sent" as the comment claims.  Thus, pre-increment
it instead, so readers find the "last sent" value and don't need
to subtract 1.
Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

This commits removes all the additions and subtractions of
the protocol offset. Now all recv and send functions, receive
the pointer to the actual data being sent, be it the ptp payload
or the transport header.

This simplification (though based on the two internal pointers within
ppsi -- se previous commit) fixed a long standing bug with bare
architectures, that didn't receive the frames due to some related
problem in offset calculation.
Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

This changes some things to make code more readable (I really didn't
know what the tmp_header was: now it is the "received_ptp_header".
The commit simplifies allocation, because the tx and rx buffers are
now part of ppi itself.

We now have tx_ptp and tx_frame, both pointing within tx_buffer (and
the same for rx). The pointers are the protocol side (aligned) and the
argument passed to send/recv (which may be not be 4-aligned).

At this point nothing changes, i.e. both gnu-linux flavours work and
bare-i386 is not able to received.

Ethernet mode used to reset the time to the epoch.
Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

This commit has no technical effect: what works still works, and what
doesn't work still doesn't work.  Still, the inlines will do
type-checking at a later time when we have a structure for the ptp
header.

Moreover the renames allow me to trace all uses in order to change
them; it also generates build errors in wrpc-sw, forcing me to fix the new
use in there as well, when I update ppsi as submodule.
Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

All fields are zero at startup, unless explicitly inizialized
by the caller.
Signed-off-by: Alessandro Rubini <rubini@gnudd.com>