Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

All functions in msg.c that are used locally are now static.
There is one that is never used at all (msg_unpack_delay_req)
but I fear I need more auditing before removing it. It may
be something we need to do, I'm not sure.
Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

This field is not needed, because we issue the response immediately,
using the last received header. The copy is not needed, nor the field.
Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

We always send them in pair, so use a single function to do it.
This simplifies the code a little, but most of al it allows
later interoduction of mandated masters on multiple vlans.
Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

Signed-off-by: C.Prados <c.prados@gsi.de>

Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

In the next commits we'll need CONFIG_ symbols and ARRAY_SIZE

Unfortunately, we can't use "-include include/generated/autoconf.h"
in CFLAGS, because pp_printf is built with our CFLAGS from its own
directory. And I'd better not include the full pathname as our make
is verbose
Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

This paves the way to the addition of a third protocol. Besides the
code is slightly smaller (around 50 bytes on all archs).
Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

This reverts commit 9a3e00784afea6ab46510315b9c50cb510175f2d.

Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

Bitfields are bad, so this turns them into flags and constants.
There should be no change at all in behaviour (although the code
is a little smaller).

The next commit does a change for real.
Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

I'm going to introduce a "flags" field in pp_instance, so diagnostic
flags are better called d_flags. The same applies, for consistency,
to the global variable.
Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

Bitfields are a bad practice. And this removes a few bytes in the wrpc
builds (no change in other builds).
Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

This reverts commit 5ac225a4.
Otherwise, in the case of WRS (when wrp->calibrated is always true) we never
call calib_poll() and we don't provide correct values of fixed Tx/Rx deltas.

The port number used to be 1, but we are multi-port, and forgot to
update this item (no bad effects were seen so far, but the standard
requires each port to use a different port number so loops can be
managed, and, for example, having both Ethernet and UDP on the same
wire is a loop.
Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

Otherwise, if we have two PTP ports for the same interface, like
Ethernet and UDP, we are not able to tell which message is for which.

This now works as expected:

./ppsi -C "port eth0;  iface eth0; role master; proto raw; diagnostics 111" \
       -C "port eth0u; iface eth0; role master; proto udp; diagnostics 111"
Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

This adds the "adjust_frequecy" method to time-wrs. The WR servo is
not using this method, which is only called by the normal PTP servo.

With this new method, a non-WR slave is able to trim frequency,
whereas before this commit we were only able to jump our time.  The
code move straight the FPGA register, by having some hardware-specific
constants explicit in the code. Thus, it is not very beautiful, but
it works fine on my systems.
Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

All adjustments are passed as part-per-billion, so after getting mad
in understanding what freq_ppm was, I renamed all of them to freq_ppb.

While making changes I verified this is what it is. Thus I fixed the comment
in ppsi.h (that was wrong by a factor of 64) and the adjustment code in
bare-time.c that made the same error (I admit I don't test arch-bare often).
Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

This bug was present in previous versions too: when not sending the
calibration pattern, we had no timeout, so a lost frame was fatal.
Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

This commits adds retry in most wr states. This allows to deal with
lost frames. There a few missing items, and a few rough situation.
The code itself shows a number of repetitions, which I dislike, but
over time we'll fix it properly.

By now this should be enough to deal with transient data loss
during calibration, that happens at some users' site.
Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

WR_DEFAULT_INIT_REPEAT is going to be used instead (we had both, none
of them used; now we'll use one).
Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

Currently, a wrpc slave taks almost 10s to do the calibration step
(uncalibrated/wr-s-lock), because, among other things, of eeprom
access.

Thus, a 10s timeout is really unsuitable. Turn it to 15 instead.
Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

The wrPortState variable was assigned-to in various places: it was
"almost" mirroring the PTP state, but not every WR state was actually
setting it.  In fact, it was only used for calibration sub-states, so
remove all other assignment.

Often, the code did:

   wp->wrMode = NON_WR;
   wp->wrPortState = WR_PORT_IDLE;

but only wrMode was ever checked, so WR_PORT_IDLE (was: WRS_IDLE) is
redundant and can be removed altogether.
Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

Some sub-states are never used, so remove them. Moreover, avoid using
WRS_CALIBRATION for two things: now wrPortState only uses WR_PORT_ values
(well, it will in the next commit).
Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

This picks the following commits (most recent on top):

   e17d874 README: update for the new code base
   d391e62 added 64-bit example/test
   670b5e8 Makefile: support 64-bit option; add div64.c
   c2384cd vsprintf-full: offer 64-bit printing as an option
   220b19e vsprintf-full: simplify a little
   526daa6 vsprintf-full: remove unsed code for %p printing
   1a28825 vsprintf-full: prevent a warning when a pointer is 16 bits

We are using 64-bit prints currently, but wrpc-sw does.
Signed-off-by: Alessandro Rubini <rubini@gnudd.com>