Related and sub projects
Sub-projects
-
Compact Universal Timing Endpoint based on White
Rabbit - a compact WR-node
implementation with minimum components required
-
Distributed RF over White
Rabbit - the distribution of
RF signals over a White Rabbit network, it describes ways of
extracting the characteristics of an RF signal using a WR sampling
node and the way to distribute those characteristics through
Ethernet frames and generate the RF on the receiving nodes.
-
PPSi - A Precise Time Protocol
(PTP, IEEE 1588) software stack whose single source code can be
compiled for many architectures (POSIX systems, SPEC...). It will be
used both, on switches and nodes
-
White Rabbit Network Interface
Card - a White Rabbit
compliant Network Interface Card (NIC) based on the SPEC and the DIO
FMC.
-
White Rabbit Network
Robustness - a broad
subject covering methods (HW & SW) which enable to increase overall
reliability of a WR-based system
-
White Rabbit Standardization
- it covers all efforts geared to standardize White Rabbit, with a
view to providing a stable specification which everyone can use to
build compliant products
-
White Rabbit Starter
Kit - this project
demonstrates the functionality of a basic timing system in order to
get people started on White Rabbit (WR).
-
White Rabbit Switch
Hardware - this project
covers the hardware development of the White Rabbit switch.
-
White Rabbit Switch HDL
- this project contains all the HDL necessary for the FPGA of the WR
switch.
-
White Rabbit Switch
Software - software for
the White Rabbit switch, and in particular the embedded Linux system
running in the ARM9 processor.
-
White Rabbit Switch
Testing - a project
to host all software and hardware developments related to testing
the White Rabbit switch.
Related projects