kernel cmdline: use 'quiet' by default

Most daemons write their stdout/err to /dev/kmsg, and thus clutter the serial console. We'd better boot in quiet mode. This, among other things, gains a few seconds of boot time. Developers can always add "verbose" if needed (or remove "quiet"). Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

kernel cmdline: use 'quiet' by default
Most daemons write their stdout/err to /dev/kmsg, and thus clutter the serial console. We'd better boot in quiet mode. This, among other things, gains a few seconds of boot time. Developers can always add "verbose" if needed (or remove "quiet"). Signed-off-by: Alessandro Rubini <rubini@gnudd.com>
cf089c1a · Alessandro Rubini · 678c53ff · cf089c1a · cf089c1a · cf089c1a
Commit cf089c1a authored Jan 31, 2014 by Alessandro Rubini
Hide whitespace changes
Inline Side-by-side

Showing with 3 additions and 3 deletions

wrboot-dhcp binaries/wrboot-dhcp +1 -1

wrboot-static-ip binaries/wrboot-static-ip +1 -1

boot-nand patches/barebox/env/bin/boot-nand +1 -1

No files found.
--- a/binaries/wrboot-dhcp
+++ b/binaries/wrboot-dhcp
-bootargs="console=ttyS0,115200 panic=10 mem=64m"
+bootargs="quiet console=ttyS0,115200 panic=10 mem=64m"
 bootargs="$bootargs root=nfs ip=dhcp"
 # if we didn't do it already, get our dhcp-based address in barebox

--- a/binaries/wrboot-static-ip
+++ b/binaries/wrboot-static-ip
-bootargs="console=ttyS0,115200 panic=10 mem=64m"
+bootargs="quiet console=ttyS0,115200 panic=10 mem=64m"
 bootargs="$bootargs root=nfs ip=192.168.16.9:192.168.16.1:255.255.255.0"
 eth0.ipaddr=192.168.16.9

--- a/patches/barebox/env/bin/boot-nand
+++ b/patches/barebox/env/bin/boot-nand
@@ -2,7 +2,7 @@
 # boot kernel from bad block aware partition
 cp /dev/nand0.kernel.bb /dev/mem.kernel
-bootargs="console=ttyS0,115200 panic=10 mem=64M"
+bootargs="quiet console=ttyS0,115200 panic=10 mem=64M"
 bootargs="$bootargs root=/dev/mtdblock1 rootfstype=jffs2 ro"
 bootargs="$bootargs wr_nic.macaddr=$macaddr"
 bootz /dev/mem.kernel