Skip to content

W
White Rabbit Switch - Software
Commit f963d421 authored by li hongming's avatar li hongming
Browse files
Options

modify wrs_linux_defconfig and add driver file for 

    USB-to-SFP management port.

  A kernel module file asix.ko and a tool ioctl will be generated.
  After insmod the asix.ko, a new network interface, eth1, will be found.
parent 1bf8e12d
Expand all Hide whitespace changes
Inline Side-by-side
Showing with 7543 additions and 3 deletions
configs/wrs_linux_defconfig
View file @ f963d421
......@@ -1115,12 +1115,168 @@ CONFIG_DUMMY_CONSOLE=y
#
# HID support
#
# CONFIG_HID is not set
CONFIG_HID=y
# CONFIG_HIDRAW is not set
# CONFIG_UHID is not set
CONFIG_HID_GENERIC=y
#
# Special HID drivers
#
CONFIG_HID_A4TECH=y
# CONFIG_HID_ACRUX is not set
CONFIG_HID_APPLE=y
# CONFIG_HID_APPLEIR is not set
# CONFIG_HID_AUREAL is not set
CONFIG_HID_BELKIN=y
CONFIG_HID_CHERRY=y
CONFIG_HID_CHICONY=y
CONFIG_HID_CYPRESS=y
# CONFIG_HID_DRAGONRISE is not set
# CONFIG_HID_EMS_FF is not set
# CONFIG_HID_ELECOM is not set
# CONFIG_HID_ELO is not set
CONFIG_HID_EZKEY=y
# CONFIG_HID_HOLTEK is not set
# CONFIG_HID_HUION is not set
# CONFIG_HID_KEYTOUCH is not set
# CONFIG_HID_KYE is not set
# CONFIG_HID_UCLOGIC is not set
# CONFIG_HID_WALTOP is not set
# CONFIG_HID_GYRATION is not set
# CONFIG_HID_ICADE is not set
# CONFIG_HID_TWINHAN is not set
CONFIG_HID_KENSINGTON=y
# CONFIG_HID_LCPOWER is not set
# CONFIG_HID_LENOVO_TPKBD is not set
CONFIG_HID_LOGITECH=y
# CONFIG_LOGITECH_FF is not set
# CONFIG_LOGIRUMBLEPAD2_FF is not set
# CONFIG_LOGIG940_FF is not set
# CONFIG_LOGIWHEELS_FF is not set
# CONFIG_HID_MAGICMOUSE is not set
CONFIG_HID_MICROSOFT=y
CONFIG_HID_MONTEREY=y
# CONFIG_HID_MULTITOUCH is not set
# CONFIG_HID_NTRIG is not set
# CONFIG_HID_ORTEK is not set
# CONFIG_HID_PANTHERLORD is not set
# CONFIG_HID_PETALYNX is not set
# CONFIG_HID_PICOLCD is not set
# CONFIG_HID_PRIMAX is not set
# CONFIG_HID_ROCCAT is not set
# CONFIG_HID_SAITEK is not set
# CONFIG_HID_SAMSUNG is not set
# CONFIG_HID_SPEEDLINK is not set
# CONFIG_HID_STEELSERIES is not set
# CONFIG_HID_SUNPLUS is not set
# CONFIG_HID_RMI is not set
# CONFIG_HID_GREENASIA is not set
# CONFIG_HID_SMARTJOYPLUS is not set
# CONFIG_HID_TIVO is not set
# CONFIG_HID_TOPSEED is not set
# CONFIG_HID_THRUSTMASTER is not set
# CONFIG_HID_XINMO is not set
# CONFIG_HID_ZEROPLUS is not set
# CONFIG_HID_ZYDACRON is not set
# CONFIG_HID_SENSOR_HUB is not set
#
# USB HID support
#
CONFIG_USB_HID=y
# CONFIG_HID_PID is not set
# CONFIG_USB_HIDDEV is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_COMMON=y
CONFIG_USB_ARCH_HAS_HCD=y
# CONFIG_USB is not set
CONFIG_USB=y
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
#
# USB Network Adapters
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_RTL8152 is not set
CONFIG_USB_USBNET=y
# CONFIG_USB_NET_AX8817X is not set
# CONFIG_USB_NET_AX88179_178A is not set
CONFIG_USB_NET_CDCETHER=y
# CONFIG_USB_NET_CDC_EEM is not set
# CONFIG_USB_NET_CDC_NCM is not set
# CONFIG_USB_NET_HUAWEI_CDC_NCM is not set
# CONFIG_USB_NET_CDC_MBIM is not set
# CONFIG_USB_NET_DM9601 is not set
# CONFIG_USB_NET_SR9700 is not set
# CONFIG_USB_NET_SR9800 is not set
# CONFIG_USB_NET_SMSC75XX is not set
# CONFIG_USB_NET_SMSC95XX is not set
# CONFIG_USB_NET_GL620A is not set
# CONFIG_USB_NET_NET1080 is not set
# CONFIG_USB_NET_PLUSB is not set
# CONFIG_USB_NET_MCS7830 is not set
# CONFIG_USB_NET_RNDIS_HOST is not set
CONFIG_USB_NET_CDC_SUBSET=y
# CONFIG_USB_ALI_M5632 is not set
# CONFIG_USB_AN2720 is not set
# CONFIG_USB_BELKIN is not set
CONFIG_USB_ARMLINUX=y
# CONFIG_USB_EPSON2888 is not set
# CONFIG_USB_KC2190 is not set
# CONFIG_USB_NET_ZAURUS is not set
# CONFIG_USB_NET_CX82310_ETH is not set
# CONFIG_USB_NET_KALMIA is not set
# CONFIG_USB_NET_QMI_WWAN is not set
# CONFIG_USB_NET_INT51X1 is not set
# CONFIG_USB_IPHETH is not set
# CONFIG_USB_SIERRA_NET is not set
# CONFIG_USB_VL600 is not set
#
# Miscellaneous USB options
#
CONFIG_USB_DEFAULT_PERSIST=y
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_OTG_FSM is not set
# CONFIG_USB_MON is not set
# CONFIG_USB_WUSB_CBAF is not set
#
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
# CONFIG_USB_XHCI_HCD is not set
CONFIG_USB_EHCI_HCD=y
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
CONFIG_USB_EHCI_TT_NEWSCHED=y
CONFIG_USB_EHCI_HCD_AT91=y
# CONFIG_USB_EHCI_HCD_PLATFORM is not set
# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
# CONFIG_USB_ISP1362_HCD is not set
# CONFIG_USB_FUSBH200_HCD is not set
# CONFIG_USB_FOTG210_HCD is not set
# CONFIG_USB_MAX3421_HCD is not set
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_OHCI_HCD_AT91=y
# CONFIG_USB_OHCI_HCD_PLATFORM is not set
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
# CONFIG_USB_HCD_TEST_MODE is not set
# CONFIG_USB_RENESAS_USBHS is not set
#
# USB Device Class drivers
#
CONFIG_USB_ACM=y
# CONFIG_USB_PRINTER is not set
# CONFIG_USB_WDM is not set
# CONFIG_USB_TMC is not set
# CONFIG_USB_MUSB_HDRC is not set
# CONFIG_USB_DWC3 is not set
# CONFIG_USB_CHIPIDEA is not set
......
kernel/Makefile
View file @ f963d421
DIRS = coht_vic wr_nic wr_rtu wr_pstats wr_clocksource wrs_devices
DIRS = coht_vic wr_nic wr_rtu wr_pstats wr_clocksource wrs_devices asix_usb
# We may "LINUX ?= /usr/src/linux-wrswitch", but it's better to leave it empty
......
kernel/asix_usb/Makefile 0 → 100644
View file @ f963d421
obj-m := asix.o
# LINUX ?= ../../../kernel
export ARCH ?= arm
export CROSS_COMPILE ?= $(CROSS_COMPILE_ARM)
# CURRENT = $(shell uname -r)
# TARGET = asix
# OBJS = asix.o
# MDIR = drivers/net/usb
# KDIR = /lib/modules/$(CURRENT)/build
# SUBLEVEL= $(shell uname -r | cut -d '.' -f 3 | cut -d '.' -f 1 | cut -d '-' -f 1 | cut -d '_' -f 1)
# ifneq (,$(filter $(SUBLEVEL),14 15 16 17 18 19 20 21))
# MDIR = drivers/usb/net
# endif
# EXTRA_CFLAGS = -DEXPORT_SYMTAB
# PWD = $(shell pwd)
# DEST = /lib/modules/$(CURRENT)/kernel/$(MDIR)
all: modules
modules:
$(MAKE) -C $(LINUX) SUBDIRS=$(shell /bin/pwd) modules
clean:
rm -f *.mod.c *.o *.ko *.i .*cmd modules.order *~
rm -rf .tmp_versions
.PHONY: all clean
\ No newline at end of file
kernel/asix_usb/asix.c 0 → 100644
View file @ f963d421
This source diff could not be displayed because it is too large. You can view the blob instead.
kernel/asix_usb/asix.h 0 → 100644
View file @ f963d421
This diff is collapsed.
kernel/asix_usb/axusbnet.c 0 → 100644
View file @ f963d421
This diff is collapsed.
kernel/asix_usb/axusbnet.h 0 → 100644
View file @ f963d421
/*
* USB Networking Link Interface
*
* Copyright (C) 2000-2005 by David Brownell <dbrownell@users.sourceforge.net>
* Copyright (C) 2003-2005 David Hollis <dhollis@davehollis.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#ifndef __LINUX_USB_USBNET_H
#define __LINUX_USB_USBNET_H
#ifndef gfp_t
#define gfp_t int
#endif
/* interface from usbnet core to each USB networking link we handle */
struct usbnet {
/* housekeeping */
struct usb_device *udev;
struct usb_interface *intf;
struct driver_info *driver_info;
const char *driver_name;
void *driver_priv;
wait_queue_head_t *wait;
/* struct mutex phy_mutex; */
unsigned char suspend_count;
unsigned char pkt_cnt, pkt_err;
/* i/o info: pipes etc */
unsigned in, out;
struct usb_host_endpoint *status;
unsigned maxpacket;
struct timer_list delay;
/* protocol/interface state */
struct net_device *net;
struct net_device_stats stats;
int msg_enable;
unsigned long data[5];
u32 xid;
u32 hard_mtu; /* count any extra framing */
size_t rx_urb_size; /* size for rx urbs */
struct mii_if_info mii;
/* various kinds of pending driver work */
struct sk_buff_head rxq;
struct sk_buff_head txq;
struct sk_buff_head done;
struct sk_buff_head rxq_pause;
struct urb *interrupt;
struct tasklet_struct bh;
struct work_struct kevent;
struct semaphore sem;
unsigned long flags;
# define EVENT_TX_HALT 0
# define EVENT_RX_HALT 1
# define EVENT_RX_MEMORY 2
# define EVENT_STS_SPLIT 3
# define EVENT_LINK_RESET 4
# define EVENT_RX_PAUSED 5
# define EVENT_RX_KILL 10
void *priv; /* point to minidriver private data */
unsigned char rx_size;
};
static inline struct usb_driver *driver_of(struct usb_interface *intf)
{
return to_usb_driver(intf->dev.driver);
}
/* interface from the device/framing level "minidriver" to core */
struct driver_info {
char *description;
int flags;
/* framing is CDC Ethernet, not writing ZLPs (hw issues), or optionally: */
#define FLAG_FRAMING_NC 0x0001 /* guard against device dropouts */
#define FLAG_FRAMING_GL 0x0002 /* genelink batches packets */
#define FLAG_FRAMING_Z 0x0004 /* zaurus adds a trailer */
#define FLAG_FRAMING_RN 0x0008 /* RNDIS batches, plus huge header */
#define FLAG_NO_SETINT 0x0010 /* device can't set_interface() */
#define FLAG_ETHER 0x0020 /* maybe use "eth%d" names */
#define FLAG_FRAMING_AX 0x0040 /* AX88772/178 packets */
#define FLAG_WLAN 0x0080 /* use "wlan%d" names */
#define FLAG_AVOID_UNLINK_URBS 0x0100 /* don't unlink urbs at usbnet_stop() */
#define FLAG_SEND_ZLP 0x0200 /* hw requires ZLPs are sent */
#define FLAG_HW_IP_ALIGNMENT 0x0400 /* AX88772B support hardware IP alignment */
/* init device ... can sleep, or cause probe() failure */
int (*bind)(struct usbnet *, struct usb_interface *);
/* cleanup device ... can sleep, but can't fail */
void (*unbind)(struct usbnet *, struct usb_interface *);
/* reset device ... can sleep */
int (*reset)(struct usbnet *);
/* stop device ... can sleep */
int (*stop)(struct usbnet *);
/* see if peer is connected ... can sleep */
int (*check_connect)(struct usbnet *);
/* for status polling */
void (*status)(struct usbnet *, struct urb *);
/* link reset handling, called from defer_kevent */
int (*link_reset)(struct usbnet *);
/* fixup rx packet (strip framing) */
int (*rx_fixup)(struct usbnet *dev, struct sk_buff *skb);
/* fixup tx packet (add framing) */
struct sk_buff *(*tx_fixup)(struct usbnet *dev,
struct sk_buff *skb, gfp_t flags);
/* early initialization code, can sleep. This is for minidrivers
* having 'subminidrivers' that need to do extra initialization
* right after minidriver have initialized hardware. */
int (*early_init)(struct usbnet *dev);
/* called by minidriver when receiving indication */
void (*indication)(struct usbnet *dev, void *ind, int indlen);
/* for new devices, use the descriptor-reading code instead */
int in; /* rx endpoint */
int out; /* tx endpoint */
unsigned long data; /* Misc driver specific data */
};
/* Drivers that reuse some of the standard USB CDC infrastructure
* (notably, using multiple interfaces according to the CDC
* union descriptor) get some helper code.
*/
struct cdc_state {
struct usb_cdc_header_desc *header;
struct usb_cdc_union_desc *u;
struct usb_cdc_ether_desc *ether;
struct usb_interface *control;
struct usb_interface *data;
};
/* CDC and RNDIS support the same host-chosen packet filters for IN transfers */
#define DEFAULT_FILTER (USB_CDC_PACKET_TYPE_BROADCAST \
|USB_CDC_PACKET_TYPE_ALL_MULTICAST \
|USB_CDC_PACKET_TYPE_PROMISCUOUS \
|USB_CDC_PACKET_TYPE_DIRECTED)
/* we record the state for each of our queued skbs */
enum skb_state {
illegal = 0,
tx_start, tx_done,
rx_start, rx_done, rx_cleanup,
unlink_start
};
struct skb_data { /* skb->cb is one of these */
struct urb *urb;
struct usbnet *dev;
enum skb_state state;
size_t length;
};
#ifndef skb_queue_walk_safe
#define skb_queue_walk_safe(queue, skb, tmp) \
for (skb = (queue)->next, tmp = skb->next; \
skb != (struct sk_buff *)(queue); \
skb = tmp, tmp = skb->next)
#endif
/* messaging support includes the interface name, so it must not be
* used before it has one ... notably, in minidriver bind() calls.
*/
#ifdef DEBUG
#define devdbg(usbnet, fmt, arg...) \
printk("%s: " fmt "\n" , (usbnet)->net->name , ## arg)
#else
#define devdbg(usbnet, fmt, arg...) \
({ if (0) printk("%s: " fmt "\n" , (usbnet)->net->name , \
## arg); 0; })
#endif
#define deverr(usbnet, fmt, arg...) \
printk(KERN_ERR "%s: " fmt "\n" , (usbnet)->net->name , ## arg)
#define devwarn(usbnet, fmt, arg...) \
printk(KERN_WARNING "%s: " fmt "\n" , (usbnet)->net->name , ## arg)
#define devinfo(usbnet, fmt, arg...) \
printk(KERN_INFO "%s: " fmt "\n" , (usbnet)->net->name , ## arg); \
#endif /* __LINUX_USB_USBNET_H */
kernel/asix_usb/command.h 0 → 100644
View file @ f963d421
/*
*********************************************************************************
* Copyright (c) 2005 ASIX Electronic Corporation All rights reserved.
*
* This is unpublished proprietary source code of ASIX Electronic Corporation
*
* The copyright notice above does not evidence any actual or intended
* publication of such source code.
*********************************************************************************
*/
#ifndef __COMMAND_H__
#define __COMMAND_H__
/*
#include <linux/module.h>
#include <linux/version.h>
#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/pci.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/ethtool.h>
#include <linux/netdevice.h>
#include <linux/etherdevice.h>
#include <linux/delay.h>
#include <linux/random.h>
#include <linux/mii.h>
#include <linux/in.h>
#include <asm/system.h>
#include <asm/io.h>
#include <asm/uaccess.h>
*/
/* NAMING CONSTANT DECLARATIONS */
#define AX88772B_SIGNATURE "AX88772B"
#define AX88772B_DRV_NAME "AX88772B"
/* ioctl Command Definition */
#define AX_PRIVATE SIOCDEVPRIVATE
/* private Command Definition */
#define AX_SIGNATURE 0
#define AX_READ_EEPROM 1
#define AX_WRITE_EEPROM 2
typedef struct _AX_IOCTL_COMMAND {
unsigned short ioctl_cmd;
unsigned char sig[16];
unsigned short *buf;
unsigned short size;
unsigned char delay;
}AX_IOCTL_COMMAND;
#endif /* end of command.h */
userspace/rootfs_override/wr/sbin/startup-mb.sh
View file @ f963d421
#!/bin/ash
export WR_HOME="/wr"
insmod $WR_HOME/lib/modules/asix.ko
echo "Using DHCP to get IP for eth1"
udhcpc -b -i eth1
LOAD_FPGA_STATUS_FILE="/tmp/load_fpga_status"
LOAD_LM32_STATUS_FILE="/tmp/load_lm32_status"
#files for monit's restart reason
......
userspace/tools/.gitignore
View file @ f963d421
......@@ -27,3 +27,4 @@ wrs_pps_control
wrs_throttling
utc_leap_test
/wrs_leapsec
ioctl
\ No newline at end of file
userspace/tools/Makefile
View file @ f963d421
......@@ -14,6 +14,7 @@ TOOLS += wrs_status_led
TOOLS += mkpasswd
TOOLS += wrs_sfp_dump
TOOLS += wrs_throttling
TOOLS += ioctl
TOOLS += utc_leap_test
PPSI_CONFIG = ../ppsi/include/generated/autoconf.h
......
userspace/tools/command.h 0 → 100644
View file @ f963d421
/*
*********************************************************************************
* Copyright (c) 2005 ASIX Electronic Corporation All rights reserved.
*
* This is unpublished proprietary source code of ASIX Electronic Corporation
*
* The copyright notice above does not evidence any actual or intended
* publication of such source code.
*********************************************************************************
*/
#ifndef __COMMAND_H__
#define __COMMAND_H__
/*
#include <linux/module.h>
#include <linux/version.h>
#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/pci.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/ethtool.h>
#include <linux/netdevice.h>
#include <linux/etherdevice.h>
#include <linux/delay.h>
#include <linux/random.h>
#include <linux/mii.h>
#include <linux/in.h>
#include <asm/system.h>
#include <asm/io.h>
#include <asm/uaccess.h>
*/
/* NAMING CONSTANT DECLARATIONS */
#define AX88772B_SIGNATURE "AX88772B"
#define AX88772B_DRV_NAME "AX88772B"
/* ioctl Command Definition */
#define AX_PRIVATE SIOCDEVPRIVATE
/* private Command Definition */
#define AX_SIGNATURE 0
#define AX_READ_EEPROM 1
#define AX_WRITE_EEPROM 2
typedef struct _AX_IOCTL_COMMAND {
unsigned short ioctl_cmd;
unsigned char sig[16];
unsigned short *buf;
unsigned short size;
unsigned char delay;
}AX_IOCTL_COMMAND;
#endif /* end of command.h */
userspace/tools/ioctl.c 0 → 100644
View file @ f963d421
This diff is collapsed.
userspace/tools/ioctl.h 0 → 100644
View file @ f963d421
#ifndef ioctl_h
#define ioctl_h
/* INCLUDE FILE DECLARATIONS */
#include "command.h"
/* CHANGE NETWORK INTERFACE WAY */
// DEFAULT_SCAN : scan "eth0" - "eth255"
// INTERFACE_SCAN : scan all available network interfaces
#define NET_INTERFACE DEFAULT_SCAN
#define DEFAULT_SCAN 0x00
#define INTERFACE_SCAN 0x01
/* NAMING CONSTANT DECLARATIONS */
struct ax_command_info {
int inet_sock;
struct ifreq *ifr;
int argc;
char **argv;
unsigned short ioctl_cmd;
const char *help_ins;
const char *help_desc;
};
const char help_str1[] =
"./ioctl help [command]\n"
" -- command description\n";
const char help_str2[] =
" [command] - Display usage of specified command\n";
const char readeeprom_str1[] =
"./ioctl reeprom [file] [size]\n"
" -- AX88772B EEPROM read tool\n";
const char readeeprom_str2[] =
" [file] - Output file\n"
" [size] - EEPROM SIZE in bytes\n";
const char writeeeprom_str1[] =
"./ioctl weeprom [file] [size]\n"
" -- AX88772B EEPROM write tool\n";
const char writeeeprom_str2[] =
" [file] - Input file\n"
" [size] - EEPROM SIZE in bytes\n";
const char chgmac_str1[] =
"./ioctl chgmac [mac_addr] [size]\n"
" -- AX88772B EEPROM write tool (specify MAC address)\n";
const char chgmac_str2[] =
" [mac_addr]- MAC address (xx:xx:xx:xx:xx:xx)\n"
" [size] - EEPROM SIZE in bytes\n";
/* EXPORTED SUBPROGRAM SPECIFICATIONS */
void help_func (struct ax_command_info *info);
void readeeprom_func(struct ax_command_info *info);
void writeeeprom_func(struct ax_command_info *info);
void chgmac_func(struct ax_command_info *info);
/* TYPE DECLARATIONS */
typedef void (*MENU_FUNC)(struct ax_command_info *info);
struct {
char *cmd;
unsigned short ioctl_cmd;
MENU_FUNC OptFunc;
const char *help_ins;
const char *help_desc;
} command_list[] = {
{"help", AX_SIGNATURE, help_func, help_str1, help_str2},
{"reeprom", AX_READ_EEPROM, readeeprom_func, readeeprom_str1, readeeprom_str2},
{"weeprom", AX_WRITE_EEPROM, writeeeprom_func, writeeeprom_str1, writeeeprom_str2},
{"chgmac", AX_WRITE_EEPROM, chgmac_func, chgmac_str1, chgmac_str2},
{NULL},
};
#endif /* End of console_debug_h */
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment