I saw that in the endpointconfiguration.php you relay a lot on an order of parameters. In other words the following line will be displayed correctly:
CONFIG_PORT01_PARAMS="name=wri1,proto=raw,tx=224295,rx=225959,role=slave,fiber=0"
but not when I swap an order of parameters:
CONFIG_PORT01_PARAMS="name=wri1,proto=raw,tx=224295,role=slave,rx=225959,fiber=0"
I'm asking you for that because there are three more new parameters that are optional:
      "ext" (extension) can be one of the following:
        - WR - use White Rabbit as an extension on this port (default if not present)
        - none - no extension on this port
      "dm" (delay mechanism) can be one of the following:
        - e2e - end to end (default if not present)
        - p2p - peer to peer
      "monitor" option to disable ("n") or enable ("y") triggering errors in SNMP on a port; "y" by default

NOW: it allows to change the order and dropdown menu in several parameters

Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

And use it if exists
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Could you change it a little bit more? Can you make it to the way if there is no file /tmp/www_wrs_version then execute the command. Otherwise read the existing file

please remove the current setting from the first line. When the port is configured as slave the first and the second entry is slave.

Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

can you change to have the dropdown list with modes in Endpoint Mode Configuration and in "Endpoint Configuration"

WR Status "UNDEFINED" when no connection to master, can you make just an empty cell?

caching wrs_version; commit: www: [BUG #1528] cache wrs_version; I would prefer this is done once for all sessions. i.e. if there is no file /tmp/www_wrs_version then execute the command. Otherwise just read content of this file

Fixed Calibration tables to write in dot-cong correctly

Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

renamed:    www/endpointcalibration.php -> www/endpointconfiguration.php
renamed:    www/fibercalibration.php -> www/fiberconfiguration.php
renamed:    www/sfpcalibration.php -> www/sfpconfiguration.php
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Previous commit brakes it here.
www: fix spliting output from wr_date in WR Monitoring
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

This is just a quick example with grandmaster on how to use menuconfig
to change a parameter.

The latest version of pandoc (1.16.x) shipped in Ubuntu 16.04 is more
restrictive on markdown syntax so we have fixed it.

This was requested by Paul Boven

Previous versions (4.0-4.1) incurred several errors when estimating the fiber length.

By definition, the speed v at which light travels through a medium with refractive index n is v=c/n
Since for the ITU-T G.652 D recommendation:

	"the refractive index profile of the fibre does not generally need to be known"

we chose a value provided by one of the most popular G.652 fiber manufacturers
for 1550 nm in their product information as seen in:
https://www.corning.com/media/worldwide/coc/documents/Fiber/SMF-28%20Ultra.pdf

fixed footer
changed title

added reboot button
fixed redirect to reboot page

Fixed fiber calibration table to match the dot-conf structure

first colum set as readonly

minor change to correct data representarion at wr monitorization

Fixed: Extract WR data in one place ... draw in many!
Fixed: Replace tail | head by grep if possible

added descriptive text and reboot screen

code to style tables so they match the web page, used for fiber calibration section

wrs_version value cached