- 10 Apr, 2019 31 commits
-
-
baujc authored
The WR time adjustment was not taken into account in the driver. The side effect was a big jump sometime of the monotonic clock used in PPSI for the calculation of the timeouts. The side effect was that many timeouts were firing too early. The driver registration take now into account the adjustment and also the calculation of the offset in the read() call.
-
Jean-Claude BAU authored
The parameter was already present in pps.conf but not yet managed by kconfig and the ppsi.conf generator
-
Jean-Claude BAU authored
This new parameter is used to control the configurable parameter L1SyncOptParamsPortDS.timestampsCorrectedTx when L1SyncBasicPortDS.optParamsEnabled is set to true.
-
Jean-Claude BAU authored
The profile is included in the port instance name. With the new profile "custom", the port instance name become too big. So only the two first letters of the profile are now included in the name.
-
Jean-Claude BAU authored
- Timeout management - Configuration enhancement - Erbest/ebast calculation Note: The pp_instance structure has changed so all related programs depending on pp_instance structure must be rebuild.
-
Jean-Claude BAU authored
- Add new config parameters (l1SyncRxCoherencyIsRequired,...) - Add new profile: CUSTOM. It will be mostly used for testing - Fix issue on state name: "pre_master" instead of "pre-master"
-
Jean-Claude BAU authored
-
Jean-Claude BAU authored
Change the format of diplayed data in order to facilitate the extraction of data with grep like command Signed-off-by: baujc <jean-claude.bau@cern.ch> Signed-off-by: Adam Wujek <adam.wujek@cern.ch>
-
Jean-Claude BAU authored
When the WR profile is used ingressLatency and egressLacenty a set to 0 by default. This has to be done to avoid to use twice this values in the delay calculation (ppsi + hal)
-
Jean-Claude BAU authored
-
Jean-Claude BAU authored
-
Jean-Claude BAU authored
-
Jean-Claude BAU authored
-
Jean-Claude BAU authored
As the bitslide is already taken into account in PPSI for all protocol extensions as the semiStaticLatency, it is no longer needed to use it in the calculation of delta_rx_phy.
-
Jean-Claude BAU authored
These modifications increase the precision of the displayed fraction part of a RelativeDifference type.
-
Jean-Claude BAU authored
- PPSI: See PPSI logs - wrs_dump_shmem.c: new fields displayed and fix errors for negative values in time display (TimeInterval, RelativeDifference, pp_time) Conflicts: userspace/ppsi userspace/tools/wrs_dump_shmem.c
-
Jean-Claude BAU authored
-
Jean-Claude BAU authored
Conflicts: userspace/ppsi userspace/tools/wrs_dump_shmem.c
-
Jean-Claude BAU authored
- Assembly_ppi_conf.sh script is able to generate JSON ppsi.conf format - New parameters in ppsi.conf. Some parameters moved at ppsi instance level - port timing configuration in Kconfig moved in KConfig_port_timing.in file. A file generator 'gen_kconfig_port_timing.sh'is used to generate it. - HAL upgraded to use the new dot-config file format. Mode ( auto, master,...) removed from HAL. - ppsi-pre.conf: Set empty because the new generated ppsi.conf always define clock-class and clock accuracy.
-
Adam Wujek authored
-
Jean-Claude BAU authored
Conflicts: userspace/ppsi userspace/tools/wrs_dump_shmem.c
-
Jean-Claude BAU authored
- Upgrade HAL to transmit the bit-slide to HA - Upgrade wr_mon tool to displat HA servo data - Upgrade wrs_dump_shmem to display the right data Conflicts: userspace/tools/wr_mon.c userspace/tools/wrs_dump_shmem.c
-
Sven Meier authored
extensions
-
Adam Wujek authored
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>
-
Adam Wujek authored
Take the HA first This reverts commit 74e16153.
-
Benoit Rat authored
since v5.0.x the WRS needs more time. We prefer to increase the reboot time in order to properly refresh the web page after a reboot.
-
Benoit Rat authored
-
Benoit Rat authored
Remove the stderr in the shell_execution to improve parsing without the state of the ports properly. According to php manual (http://php.net/manual/en/function.strpos.php) strpos must be used the indentical comperator because strpos can return 0 if string found at position 0.
-
Benoit Rat authored
Now we use ajax+js to constantly refresh value of WR into the web interface without needing to manually refresh the webpage by the user. However this refresh flood the accesslog and this is a problem with the small RAM available
-
Adam Wujek authored
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>
-
Adam Wujek authored
Dump temperature, voltage, bias, TX and RX power from the SFP's DOM area Signed-off-by: Adam Wujek <adam.wujek@cern.ch>
-
- 19 Feb, 2019 3 commits
-
-
Adam Wujek authored
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>
-
Adam Wujek authored
when query OID wrsBootConfigStatus from: SNMP: Error wrsBootSuccessful: Unable to read status file for wrsBootConfigStatus to: SNMP: Config file is not valid or too short (less than 200 characters) Signed-off-by: Adam Wujek <adam.wujek@cern.ch>
-
Adam Wujek authored
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>
-
- 29 Jan, 2019 1 commit
-
-
Adam Wujek authored
This fixes builds e.g. on ubuntu 18.04 Signed-off-by: Adam Wujek <adam.wujek@cern.ch>
-
- 20 Nov, 2018 5 commits
-
-
Adam Wujek authored
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>
-
Adam Wujek authored
DONE: Kconfig, assembly_ppsi_conf.sh TODO: SNMP, DOCs, HAL? Redefine options CONFIG_PORTXX_PARAMS in dot-config --role={master,slave,auto,none}, keep non-wr for compatibility --ext={WR}:{HR}, HR for future, if no ext defined use WR as default --add extra option to disable/enable triggering errors in SNMP --add option for delay mechanism (dm) p2p or e2e e2e default Signed-off-by: Adam Wujek <adam.wujek@cern.ch>
-
Adam Wujek authored
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>
-
Adam Wujek authored
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>
-
Adam Wujek authored
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>
-