Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

when query OID wrsBootConfigStatus
from:
SNMP: Error wrsBootSuccessful: Unable to read status file for wrsBootConfigStatus
to:
SNMP: Config file is not valid or too short (less than 200 characters)
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

This fixes builds e.g. on ubuntu 18.04
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

DONE: Kconfig, assembly_ppsi_conf.sh
TODO: SNMP, DOCs, HAL?

Redefine options CONFIG_PORTXX_PARAMS in dot-config
--role={master,slave,auto,none}, keep non-wr for compatibility
--ext={WR}:{HR}, HR for future, if no ext defined use WR as default
--add extra option to disable/enable triggering errors in SNMP
--add option for delay mechanism (dm)
  p2p or e2e
  e2e default
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

For rnabling 50ohm termination for 1-PPS input
It is set from HAL.
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Requires gateware synthesized with wr-switch-hdl commit:
b1b621b add bit to control WRS 1-PPS in termination

Also increase all *_SHMEM_VERSION
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

uplift contains fixes for veryx tests
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

    The bitslide module won't be reset when replugging the SFP and fiber, which may lead to
the wrong bitslide.

Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

As now the compilation is done only in wr-switch-sw repo.
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Add MIB to /wr/lib/
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

+fix typo
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

There is no support of STP yet.
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

If CPU is included or not in the mask with all ports the rtu_stat shall display
"ALL CPU"

rtu_stat add mask 01:80:c2:00:00:53 0x3ffff 0
rtu_stat add mask 01:80:c2:00:00:57 0x7ffff 0

rtu_stat displayed:
[...]
01:80:c2:00:00:53         ALL           0          STATIC  (hash 014:0)   -
01:80:c2:00:00:57         ALL           0          STATIC  (hash 090:0)   -
[...]

now:
[...]
01:80:c2:00:00:53         ALL           0          STATIC  (hash 014:0)   -
01:80:c2:00:00:57         ALL CPU       0          STATIC  (hash 090:0)   -
[...]
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Comments are simply ignored. There are not written back to the dot-config.
This solution does not support "#" signs in the parameters' values.
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

--Remove leading spaces (but not following)
--Ignore value if not starting with ",[digit],y,n,m
--ignore comments after value
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Merge BMCA

returns 0 on success, -1 if leap61 test failed, -2 if leap59 test failed and -3 if no-leap test failed.